Hopp til innhold
Hjem / Batteri & lader / Batteri / NiMH / 7,2 Volt / Carson Hump Pack 2700 mAh (7,2V NiMh) for Sand Scorcher

Carson Hump Pack 2700 mAh (7,2V NiMh) for Sand Scorcher

Art.nr: 608097

449,-

Carson

Carson
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

For TAMIYA modeller som Sand Scorcher og Buggy Champ.

 

Tekniske data.
6-cell sub-C battery pakke 7.2 V/2700 mAh
Vekt 335 g
Dimensjon 110x48x42 mm
TAMIYA kontakt

 

Produsent

Carson

Carson

Carson har mye til Tamiya Lastebiler.

Relaterte produkter

 

Hovedbilde Tamiya 58452 Sand Scorcher Off-Road Racer 2010 no esc Hovedbilde Tamiya 58452 Sand Scorcher Off-Road Racer 2010 no esc
Tamiya 58452 Sand Scorcher Off-Road Racer 2010 no esc
Art.nr: 58452
Copied
  This is the electric powered, radio controlled, 1/10 scale Sand Scorcher Buggy Kit. FEATURES: Chassis: 0.08" (2mm) thick FRP main frame with duralumin plate for added strenth and flexibility Drive: Rear wheel Motor: 540 type Electronic Speed Control: Not Included Transmission: Single-speed Gearbox: Transparent plastic, fully enclosed, die cast metal and clear resin components Body: Polystyrene, trimmed and molded in white Bumper: Front reinforced resin with integrated metal bars Shocks: Oil filled Ball Bearings: Full set Tires: Front ribbed 2.7" (69mm) diameter, 0.71" (18mm) wide Rear paddle 3.1" (79.5mm) diameter, 1.6" (40mm) wide Wheels: Three-piece center lock, molded in white Suspension: Front double trailing arm, die cast front and rear arms and metal uprights, swing axle rear suspension with metal torsion bars Camber: Non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bellcrank type with servo saver INCLUDES: Sand Scorcher Buggy Kit, 540 motor, white plastic body, tires, wheels oil-filled shocks, decals, 15T pinion gear, instruction manual, 70 tooth spur gear, driver bust. REQUIRES: Radio: 2-Channel with one servo and esc. AA Radio Batteries: Eight for transmitter Battery: Tamiya recommends a small 7.4V LiPo. Or Nimh 7.2 carson.      SPECS:  Length: 15.7" (400mm) Width:   8.3" (210mm) Height:  5.9" (150mm) Weight:  3.8lbs (1730g) BODY- Length: 13.6" (345mm) Width:   6.8" (173mm) at widest point Height:  4.7" (120mm)

3.495,-

4.395,-

KJØP
-20%
Hovedbilde Tamiya 58441 Buggy Champ 2009 Hovedbilde Tamiya 58441 Buggy Champ 2009
Tamiya 58441 Buggy Champ 2009
Art.nr: 58441
Copied
The prominent figure of the R/C car boom was the Buggy Champ which was first released in 1979. Tamiya is now proud to re-release the Buggy Champ to celebrate the car's 30thyear anniversary. The chassis has been finely tuned while maintaining the original features of the chassis such as the unique front double trailing arms and rear torsion suspension.R/C fans' hearts will definitely race when they see the nostalgic form and relive the dynamic performance of this machine. Description The Buggy Champ, which started the "Buggy Boom" when it was released in 1979, now comes back as a new and improved version. It keeps true to the basic layout of the original while incorporating modern improvements and features many refined parts that are reproduced with newly built metal moldings. The Buggy Champ also features a transparent mechanism box which protects the mechanics and battery and comes with grooved front and rear tires with block tread pattern. A realistic body is molded in white polystyrene and can be painted with plastic model paints. The Buggy Champ surely brings back the memories of the good old days when everyone was excited with its aggressive driving performance. About the Chassis: The chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and main battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss and mounted on the 3-piece center-lock wheels are grooved front tires and rear tires with block tread pattern that ensure superb off-road performance. • Length: 400mm, Width: 210mm, Height: 150mmWheelbase: 250mm • Tread: F170mm,　R175mm • Tire Width/Diameter: F19/74mm,　R35/83mm • Chassis: 2mm Thick FRP Plate with Reinforcing Aluminum Plate • Rear Wheel Drive • Weight: Approx. 1730g • Type 540 Motor included  • No Differential Gears • Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle • 4 Oil Dampers • Gear Ratio=6.5:1 or 9.3:1 • Requires: 2-Channel radio, servo, esc, Battery pack & charger, and Tamiya TS paint. (Sold separately) Compatible Battery Spec Size: 96mm X 47mm X 25MM (Shorty Pack) Shorty Packs available by various battery manufacturers in the hobby industry offer “Shorty Pack” batteries that will fit in the chassis compartment. NOTE: The foam block included with the kit will need to be modified or changed to accommodate the “shorty pack”. Additionally, you will need to change the plugs on the included ESC to be compatible with “shorty pack” bullet connectors.  

3.995,-

4.795,-

KJØP
-17%

Kunder kjøpte også

Hovedbilde Tamiya 86063 PS-63 BRIGHT GUN METAL
Tamiya 86063 PS-63 BRIGHT GUN METAL
Tamiya PS-63 PS-63 BRIGHT GUN METAL These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.

119,-

KJØP
Hovedbilde Tamiya 86023 PS-23 Polycarb Spray Gunmetal 3 oz
Tamiya 86023 PS-23 Polycarb Spray Gunmetal 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde SkyRC B6AC Neo 200WDC/60WAC PD3.0 / XT60
SkyRC B6AC Neo 200WDC/60WAC PD3.0 / XT60
SkyRC her med en så kompakt med punch! Denne laderen har mulighet for å lade å gi den en ladestyrke på 200W (DC) med en maks spenning på 10A! B6 Neo har XT60 DC-input og Type-C PD som gir deg god fleksebilitet! I tillegg er B6AC Neo en batterisjekker som sjekker LiPo, LiHV, LiFe, og LiIon-batterier. All data vises på fargeskjermen og styres enkelt via kun tre knapper! Ved bruk av PD3.0 porten har du tilgang til å lade med 65W.   Hvor effektiv er B6AC? * Kan lade en iPhone 15 nesten 3 ganger raskere enn med en standard 5W lader * Muligheten for å lade de nyeste Samsung-telefonene med full ladestyrke * Lade Nintendo Switch selv når det games i "handheld mode" * Lader MacBook Pro (M3 Pro/Max 2023) på kun 1,6 timer Spesifikasjoner: Vekt 150gram Innspenning DC 10-30V Display 128xRGBx160 Pixel Størrelse 70.6x50.6x46mm Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 Ladestyrke 0.1-10A Maks Ladeeffekt DC: 200W / AC: 60W / PD3.0: 5V@3A, 9V23A, 12V@3A, 20V@3.25A Discharge 19W (6S (4.2V/S) Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.

895,-

KJØP
Hovedbilde Zap PT-102 PLASTI ZAP CA BRUSH ON 1/4 OZ
Zap PT-102 PLASTI ZAP CA BRUSH ON 1/4 OZ
 Medium viskositet for plast Ikke brennbar  Herder klart Vil ikke angripe maling Flott på de fleste plastmodeller, bil listverk og vinyl reparasjoner Fungerer best på: plast, gummi

59,-

KJØP
Hovedbilde Absima 250CPS / 23WT Silicone Shock Oil 60ml
Absima 250CPS / 23WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 250. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Tamiya 54500 TT-02 HIGH SPEED GEAR SET 68T
Tamiya 54500 TT-02 HIGH SPEED GEAR SET 68T
TT-02 HIGH SPEED GEAR SET 68T

129,-

159,-

KJØP
-19%
Hovedbilde Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10
Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10
QuicRun 1060, 60A børsteregulator som er vann og støv beskyttet. Passer til de fleste 1:10 biler med børsteoppsett, leveres med Tamiya batterikontakt og programmeres enkelt via jumper. Kan brukes med 2-3s LiPo eller 7,2V - 10,8V NiMh batterier.   Størrelse 35,5 x 32,18 x 18mm Vekt 39g

389,-

429,-

KJØP
-9%
Hovedbilde Bronto Ladekabel - XT60 til Tamiya
Bronto Ladekabel - XT60 til Tamiya
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 16AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Tamiya til XT60-plugger. Benyttes for lading av batterier med Tamiya, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 16AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Tamiya

79,-

KJØP
Hovedbilde SkyRC T200 Charger 240VAC/12VDC 12A 2x100W
SkyRC T200 Charger 240VAC/12VDC 12A 2x100W
NB! Denne laderen leveres uten ladekabel. Se lengere nede under:  Relaterte produkter.  SkyRC T200 Dual Balance Charger Sleeker Than Ever T200 comes ready to charge in the most compact design yet while taking up minimal space in the pit area. Only taking up about as much bench space as a pair of battery packs, the charger delivers dedicated 100W integrated power per each of the two complete charging circuits. Inside the case, there’s enough transformer power to fill two batteries simultaneously at up to 12 amps each, that you can pump life into everything from a receiver pack to a 6S LiPo or 15S NiMH or NiCD. All the programmability you expect of a modern higher-level charger is built in! Multiply the Efficiency With Duo With each charging channel programmed and operating independently, T200 allows you to charge two batteries simultaneously, and it will intelligently and automatically charge the packs at once to their maximum capacity. To top of it, the cells being charged do not even necessarily have the same configuration or be of the same chemical type. Multi-purpose for Most Chemistries With Generic XT60 The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead acid). With the almost de facto standard of XT60* interface, plugging prevents reverse polarity and ensures super-solid connection. *Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80℃ thanks to their gold-plated spring pins’ better contact surface area. Versatile With the Addition of AGM and Cold Modes AGM (Absorbent Glass Mat) battery is maintenance free, provides good electrical reliability and is lighter than the flooded lead acid type. However, AGM batteries are far more different than lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode. Optimized Operating Software SkyRC T200 features the so-called AUTO function that sets the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two-way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! Intuitive Operation The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. The charging programs with the same logic as many other chargers by SkyRC, so it will be familiar to many users. But even if T200 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. After one run through the manual, you’ll have it down. Terminal Voltage Control (TVC) The charger allows users to change the end voltage (for expert users only). Portable With a Handle Compact design with the handle ensures the charger is convenient to travel with. Specifications: Case Material: Plastic Case Size: 178x135x96mm Weight: 850g Display Type: LCD Display Backlight: Blue Power: DC Input Voltage: 11-18V AC Input Voltage : 100-240V Charge Wattage: 100W X 2 Discharge Wattage: 10W Battery Types/Cells: LiPo/LiHV/LiFe/LiIon: 1-6cells NiMH/NiCd: 1-15cells Pb: 2-20V Battery Capacity Range: NiMH/NiCd: 100-50000mAh LiPo/LiIon/LiFe/LiHV: 100-50000mAh Pb: 100-50000mAh Charge Voltage: NiMH/NiCd: Delta peak detection LiPo: 4.18-4.25V/cell LiFe: 3.58-3.7V/cell Pb: 1.8-2.0V/cell LiIon: 4.08-4.2V/cell LiHV: 4.25-4.35V/cell Discharge Cut-off Voltage: NiMH/NiCd:0.1-1.1V/cell LiPo:3.0-3.3V/cell LiFe:2.6-2.9V/cell LiIon: 2.9-3.2V/cell LiHV: 3.1-3.4V/cell   Battery Cut-off Temperature: 20ºC / 68ºF-80ºC / 176ºF (adjustable) Reading Voltage Range: 0.1-26.1V/cell Charge Current: 0.1A-12.0A Discharge Current: 0.1A-2.0A Balance Cells: 2-6 cells Balance Current: 500mA/cell Safety Timer: 1-120minutes off Charge Method: CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd. Memory: 10 different charge/discharge profiles

1.399,-

KJØP
Hovedbilde
"Bulk" Tamiya TBLE-02S Brush & Brushless ESC
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Tamiya packaging ***   NB NB denne kommer uten sensorkabel.   This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings can be adjusted independently, and it features 3 protection systems against overheating, overloading and low voltage. It is also compatible with brushed motors (Normal Type 540 and Sports-Tuned Motors 25 Turn or higher). Note: When using servos with a current exceeding 1.5A, BEC output may be shut down.

549,-

799,-

Ikke på lager
-31%
Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter
Flysky FS-GT3B 2.4GHZ Transmitter
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Hovedbilde Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2
Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2
NB! Dette er et helt nytt produkt, men den kommer uten embalasje. Futaba S-U300 Universal Standard Servo This is a new Futaba standard servo with S.BUS(2) function Specs: Plastic Gears Digital / S.BUS2 Input Voltage: 4.8-6V Torque @ 4.8V: 3.5kg/cm Torque @ 6.0V: 4.5kg/cm Speed @ 4.8V: 0.23s/60° Speed @ 6.0V: 0.19s/60° Size: 40.4 x 19.8 x 36.0 mm Weight: 36g

219,-

269,-

KJØP
-19%
Hovedbilde Tamiya 85053 Spray Lacquer TS-53 Deep Metalic Blue 3 ...
Tamiya 85053 Spray Lacquer TS-53 Deep Metalic Blue 3 ...
This is a 100ml Spray Can of Tamiya Color Paint for                      Plastics (TS-53 Deep Metallic Blue). FEATURES: These cans of spray paint are extremely useful for painting large             surfaces.           Synthetic lacquer that cures in a short period of time.           Enough paint to cover 2 or 3 1/24 scale car bodies.           Not effected by acrylic or enamel paints, so detailing can be added. INCLUDES: One 100ml Spray Can of Tamiya Color Paint for Plastics (TS-53 Deep             Metallic Blue). SPECS:    Volume: 100ml

109,-

KJØP
Hovedbilde Tamiya 58737 Hotshot II 2024 Black Body No ESC Hovedbilde Tamiya 58737 Hotshot II 2024 Black Body No ESC
Tamiya 58737 Hotshot II 2024 Black Body No ESC
1/10 R/C Hotshot II byggesett. Kom opprinnelig i 1987, relansert i 2024 med en rekke forbedringer.  Har ferdig malt karroseri i svart. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere ESC (fartskontroller) NiMH eller LiPO batteri (round case) Batterilader This R/C model assembly kit is a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987. The sleek, smart body and rear wing are polycarbonate and pre-painted black, as well as being pre-cut. Stickers are included to apply racy orange and yellow markings. Durable 4WD Buggy Chassis The Hotshot II has a shaft-driven 4WD chassis with sealed gearboxes front and rear to keep out dirt and sand; each has a differential inside for smooth cornering, while the underside of the model is protected by the underguard. Its 4-wheel independent double wishbone suspension employs three CVA oil dampers - one at the front and two at the rear, with a front stabilizer helping to get the most out of the 4-wheel drive. White dish design wheels are paired with semi-pneumatic oval block tires for exemplary grip on tough off-road surfaces. Specifications ★Length: 390mm width: 235mm, height: 160mm ★Wheelbase: 265mm ★Tire width/diameter: 31/88mm (front); 38/88mm (rear) ★Tread: 205mm (front); 200mm (rear) ★ABS monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel independent double wishbone suspension ★CVA oil dampers ★Selectable gear ratio = 10.04:1, 8.70:1, 8.16:1, 7.68:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately. Separately Required Items ★2-channel R/C system w/ESC ★Batteries for transmitter ★Battery pack & charger ★Servo

2.695,-

3.295,-

KJØP
-18%
Hovedbilde Kyosho 82243S Orion WP Brush ESC 45A. ORI65130 S-Plug
Kyosho 82243S Orion WP Brush ESC 45A. ORI65130 S-Plug
82243S ORION WP BRUSH ESC 45A.ORI65130 S-Plug Team Orion 45A brushed motor water proof ESC. LiPo capable. Forward/Reverse.  Genuine Kyosho replacement parts make maintenance fast and easy! 

499,-

549,-

KJØP
-9%
Hovedbilde Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)
Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)
Traxxas® connector (male) (2) - FOR ESC USE ONLY

65,-

KJØP
Hovedbilde Traxxas 2843X LiPo 2S 7.4V 5800mAh 25C w/iD ...
Traxxas 2843X LiPo 2S 7.4V 5800mAh 25C w/iD ...
Passer til:   Stampede 4x4 Bandit Rustler Stampede Slash 4x4 og Slash Ultimate E-Maxx E-Revo 1/10 Slash 2WD Summit 1/10 Antall celler : 2 (7,4volt) Kapasitet : 5800mAh Strøm ledning tykkelse : 12 AWG Balanseringsplugg : JST-XH Max ladestyrke : 2C (10 amp) Kontinuerlig utlading: 25C (145A) Max utladning : 50C (290A) Lengde: 13,50 cm (med ledningen 14,00 cm) Bredde: 4,27 cm Høyde : 2,44 cm Vekt : 312 gram

819,-

899,-

KJØP
-9%
Hovedbilde Tamiya 58441 Buggy Champ 2009 Hovedbilde Tamiya 58441 Buggy Champ 2009
Tamiya 58441 Buggy Champ 2009
The prominent figure of the R/C car boom was the Buggy Champ which was first released in 1979. Tamiya is now proud to re-release the Buggy Champ to celebrate the car's 30thyear anniversary. The chassis has been finely tuned while maintaining the original features of the chassis such as the unique front double trailing arms and rear torsion suspension.R/C fans' hearts will definitely race when they see the nostalgic form and relive the dynamic performance of this machine. Description The Buggy Champ, which started the "Buggy Boom" when it was released in 1979, now comes back as a new and improved version. It keeps true to the basic layout of the original while incorporating modern improvements and features many refined parts that are reproduced with newly built metal moldings. The Buggy Champ also features a transparent mechanism box which protects the mechanics and battery and comes with grooved front and rear tires with block tread pattern. A realistic body is molded in white polystyrene and can be painted with plastic model paints. The Buggy Champ surely brings back the memories of the good old days when everyone was excited with its aggressive driving performance. About the Chassis: The chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and main battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss and mounted on the 3-piece center-lock wheels are grooved front tires and rear tires with block tread pattern that ensure superb off-road performance. • Length: 400mm, Width: 210mm, Height: 150mmWheelbase: 250mm • Tread: F170mm,　R175mm • Tire Width/Diameter: F19/74mm,　R35/83mm • Chassis: 2mm Thick FRP Plate with Reinforcing Aluminum Plate • Rear Wheel Drive • Weight: Approx. 1730g • Type 540 Motor included  • No Differential Gears • Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle • 4 Oil Dampers • Gear Ratio=6.5:1 or 9.3:1 • Requires: 2-Channel radio, servo, esc, Battery pack & charger, and Tamiya TS paint. (Sold separately) Compatible Battery Spec Size: 96mm X 47mm X 25MM (Shorty Pack) Shorty Packs available by various battery manufacturers in the hobby industry offer “Shorty Pack” batteries that will fit in the chassis compartment. NOTE: The foam block included with the kit will need to be modified or changed to accommodate the “shorty pack”. Additionally, you will need to change the plugs on the included ESC to be compatible with “shorty pack” bullet connectors.  

3.995,-

4.795,-

KJØP
-17%
Hovedbilde RPM 73592 Caster Blocks/Steering Blocks Slash 4×4, ...
RPM 73592 Caster Blocks/Steering Blocks Slash 4×4, ...
Caster Blocks & Spindle Blocks for the Slash 4×4, Rustler 4×4, Stampede 4×4, Hoss 4×4, Rally & Telluride Quick Notes: – fits the Slash 4×4, Slash 4×4 LCG Kits, Rustler 4×4, Stampede 4×4, Hoss 4×4 & the Rally 4wd – replaces stock Traxxas #6832, #6832X, #6837 & #6837X – not interchangeable with stock or aftermarket steering blocks / caster blocks Description Since the release of the first Slash 4×4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the call with our Caster & Steering Blocks for these awesome trucks. We started with a blank slate, drew in the necessary design elements and built an all-new design with a focus on punishment survivability. The core design of our caster blocks revolve around the lower-case “H” structure which provides extreme rigidity to keep camber and caster setting locked in place while running normally, yet our materials provide serious impact absorption characteristics to prevent breakage when those “oops” moments inevitably arise. RPM steering blocks have also been reengineered for durability, strength, rigidity and crash-survivability. More material surrounds the kingpin posts while smoother flowing turnbuckle arms assure consistent feel and performance from the steering system. Our Slash 4×4 / Stampede 4×4 / Rustler 4×4 / Hoss 4×4 front-end components are made from our trademark blend of indestructible materials and come factory backed by our limited lifetime warranty for strength and durability you know you can trust! Tech Notes:  RPM caster blocks and steering blocks for the Slash 4×4, Rustler 4×4, Stampede 4×4, Hoss 4×4, Rally & Telluride are sold as a set, including 2 caster blocks and 2 spindle blocks. These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks.   

269,-

299,-

KJØP
-10%
Hovedbilde Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Hovedbilde Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ... Hovedbilde Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...
Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...
EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification   One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! ­ ­ QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER ­ Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries ­ ­     EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: ­ 100–240 Volts Charge Current Range: ­ 1.0-4.0A (40W Max.) Discharge Current Range: ­ 500mAh Current Drain For Balance Ports: ­ 500mAh NiMH Battery Cell Count: ­ 5–8 Cells LiPo Cell Count: ­ 2–3 Cells Net Weight: ­ 365g Dimensions: ­ 146 x 123 x 53mm     MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

KJØP
-9%
Hovedbilde RPM 80189 Rear A-Arms Rustler/Stampede 2WD Red ...
RPM 80189 Rear A-Arms Rustler/Stampede 2WD Red ...
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Red Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

KJØP
-12%
Hovedbilde Traxxas 2842X Battery Li-Po 2S 7,4V 5000mAh 25C ...
Traxxas 2842X Battery Li-Po 2S 7,4V 5000mAh 25C ...
Traxxas 5000mAh 7.4v 2-Cell 25C Short LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 7.4 V (2S) C Rating: 25 Length: 137 mm Height: 24 mm Width: 43 mm Weight: 280 g

649,-

749,-

KJØP
-13%
Hovedbilde Dynomax 9533 Connector Tamiya Pair
Dynomax 9533 Connector Tamiya Pair
Connector Tamiya Pair

25,-

35,-

KJØP
-29%
Hovedbilde Savox SC-0253MG PLUS Servo 6Kg 0,15s Metal Gear
Savox SC-0253MG PLUS Servo 6Kg 0,15s Metal Gear
SAVÖX SC-0253MG-PLUS - Metal-Geared Digital Standard Servo The SC-0253MG is a budget friendly, digital standard servo with metal gears and a bearing support for those wanting more than what a standard servo offers. Features: Strong metal gear train for added durability Ideal for 1/10 cars and planes Great replacement for standard servos with plastic gearing Specifications: Torque @ 4.8V: 4kg/cm Torque @ 6V: 6kg/cm Speed @ 4.8V: 0.17 sec/60 deg Speed @ 6V: 0.15 sec/60 deg Dimensions L x W x H: 40.7 x 20.0 x 37.0mm Weight: 59g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 220mA @4.8V, 240mA @6.0V Stall Current (at locked): 800mA @4.8 V, 1000mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 250 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

399,-

429,-

KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png