Hopp til innhold

Carson 907220 Model Sport 1/14 Universal Animal Guard

Art.nr: 907220

419,-

Carson

Carson

På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Carson Model Sport 1/14 Universal Animal Guard

Produsent

Carson har mye til Tamiya Lastebiler.

Kunder kjøpte også

CHARGE LEAD, 4MM BULLET TO EC5 MALE,12AWG, 150MM (ESC END)

109,-

119,-

KJØP
-8%
Pacer ZIP KICKER Super-Glue Accelerator is the best working accelerator for ZAP and Other Super Glues. A Little Spritz Works in Seconds. FEATURES Forces cure of large amounts of SLO-ZAP when forming fillets. Solves tough-to-bond applications Environmentally safe Formula Will not craze most plastics INCLUDES One 2oz aerosol can of Zip Kicker

119,-

KJØP
Rim Hub With Pins.

45,-

KJØP
This is the Tamiya 1/18 scale Radio Controlled, Electric Powered King Yellow 6x6 Off-Road School Bus Kit. FEATURES Chassis: G6-01 plastic monocoque Drive: Six wheel gear driven Motor: 540 brush equipped, front-center mounted Body: Clear polycarbonate with separate detail parts Suspension: Six wheel double wishbone Shocks: Friction, not oil-filled Front Bumper: Spring loaded INCLUDES 1/18 scale King Yellow 6x6 School Bus Kit, Clear Body, Decals Tires, Wheels, Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo ESC: Tamiya TEU-302BK recommended Battery: 7.2V 6-cell stick pack with Standard connector Battery Charger: Compatible with selected battery Polycarbonate safe spray or brush-on paint Building and track equipment

2.495,-

2.795,-

Ikke på lager
-11%
Transverse Drive Shaft Set

229,-

KJØP
Aluminiums sving skive er offisielt lisensiert av selskapet SAF Holland GmbH og passer for alle Tamiya lastebiler i 1:14 skala. Installasjonen av svingskiven er lett å gjøre. Når du bruker multifunksjonsettet, TAMIYA MFC MFC 01 eller 03, er det en mikrobryter for "kobling" og kan monteres meget enkelt. Hvis du ikke bruker multifunksjonsenhet, så benyttes låsen som følger med i pakken. De medfølgende glideplater gir modellen et ytterligere poeng av funksjonalitet og detaljering.d

1.595,-

1.695,-

KJØP
-6%
Shock Absorber Unit (Alu) 2Pcs

389,-

429,-

KJØP
-9%
Shock Absorber Unit

399,-

KJØP
Front Drive Shaft

65,-

KJØP
Shock Absorber Unit (Plastic) 2Pcs

159,-

179,-

KJØP
-11%
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-19 Camel Yellow).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
  This is 2oz bottle of Pacer Foam Safe Kicker with Pump. FEATURES: Safe on most foam products           Compatible with most other Foam Safe CAs           Works on Balsa, Spruce, Plywood, Plastic and Metals, etc           Forces most CAs to cure in 10 seconds or less           Increases Gap filling and fillet forming compability           None-fuming formula INCLUDES: One bottle of Pacer Foam Safe Kicker           One pump REQUIRES: Use with CA glues SPECS:    2oz (59.1ml)

139,-

KJØP
This is the electric powered, radio controlled, 1/10 scale, Tamiya Blitzer Beetle 2011 Off-Road Kit. FEATURES: Chassis: ABS plastic bathtub type Drive: Rear wheel Motor: 540 size Pinion Gear: 13T metal Electronic Speed Control: Not incl. Differential: Planetary gear Gearbox: Sealed Shocks: Oil filled CVA, plastic body Suspension: Double wishbone Body: Resin molded, black in color with tinted windows Steering: Two-piece adjustable steering tie rods with servo saver Tires: Front rib/spike 1.7" (42.2mm) wide, 3.8" (98mm) diameter Rear spike/X pattern 2" (52mm) wide, 3.8" (98mm) diameter Wheels: Neon orange plastic 10 spoke Front 1.6" (41.5mm) wide, 2.2" (56mm) diameter Rear 1.9" (50mm) wide, 2.2" (56mm) diameter, 12mm hex Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable INCLUDES: 1/10 scale Tamiya Blitzer Beetle 2011 kit with Body and Wheels, 540 Motor, Driver Figure, Servo Saver, Decals and Instruction Manual REQUIRES: Radio: 2-channel with steering servo and esc. Battery: 6-cell, 7.2V NiMH stick pack with standard connector Battery Charger: To match selected battery Transmitter Batteries: Four or eight depending on transmitter Tools and track equipment SPECS:      Vehicle;           Length: 15.5" (394mm)           Width:  11.6" (295mm)           Height:  7.2" (182mm) Body;           Length: 13.1" (332mm)           Width:   7.3" (186mm)           Height:  4.9" (124mm)

1.995,-

2.195,-

KJØP
-9%
These newly designed aluminum wheels look sharp on any Tamiya 1/14 scale R/C Tractor Truck. The wheels will highlight the heaviness of your truck and accent the rig.

650,-

KJØP
These newly designed aluminum wheels look sharp on any Tamiya 1/14 scale R/C Tractor Truck. The wheels will highlight the heaviness of your truck and accent the rig.

600,-

KJØP
Feature: For: Tamiya 1/14 Tractor Truck Material: Plastic Color: Metal-Plated Specification: Width: 20mm Diameter: 47mm

119,-

KJØP
  These are the Tamiya Metal-Plated Front Wheels                For 1/14 R/C Tractor Trucks with 22mm wide tires FEATURES: Plastic construction, silver colored, matte finish INCLUDES: Two wheels SPECS:    Diameter: 1-7/8" (48mm)           Width: 1" (25mm)

79,-

KJØP
Features: Car Jack for 1:10 scale cars - especially crawlers       (14)

45,-

KJØP
Tamiya S parts.

149,-

KJØP
Roof Lights - 7,2V SMD LED - 2 pcs. The Set includes two 7,2V SMD LED's for Tamiya Trucks. Can be used in combination with the Roof Lamp Frames from Carson.

239,-

KJØP
     This is the Hitec standard size Ball Bearing Servo with the            Universal Futaba J, Hitec S, JR and Airtronics Z Connector.   Connector is compatible with all modern receivers and wiring accessories. FEATURES: NEW Heavy-duty resin gear train           Ball bearing           3-pole ferrite motor INCLUDES: One Deluxe Standard servo with nylon bushing           One white small X-shaped servo horn.           One white adjustable servo horn.           One white offset straight servo horn.           One white wheel servo horn           Four brass eyelets           Four black rubber vibration isolators.           Four 2 x 14mm mounting screws REQUIRES: Radio system SPECS:    Speed: 0.19 sec/60° @ 4.8V           Speed: 0.15 sec/60° @ 6.0V           Torque: 42.00 oz-in @ 4.8V           Torque: 51.00 oz-in @ 6.0V           Length:  1.6" (41mm)           Width:   0.8" (20mm)           Height:  1.4" (37mm)           Weight:  1.7oz (48g)

289,-

319,-

KJØP
-9%
We proudly announce new Hitec's High Response, High Resolution series servos. HS-8330SH, HS-8335SH perform same as our Ultra premium HS-8360/70/80TH series servos that have durable steel gears and light weight street price. The rapid-fire response and decisive action of each servo  will elevate your hobby to an entirely new level, whether you are tearing it up with your 1/10th scale on/off-road vehicle or your 600/700-size electric/gas-powered helicopter. Features: - High Voltage, High Response Digital Servo - Durable Steel Gears with Dual Ball Bearings - Ultra Hardness Gear Shaft with 3 Axial Metal Bushings - Heat sink for Motor - Water & Dust Resistant - 3mm Horn Screw ( '+' & HEX Socket Screw Included) - Non Programmable - Applied H25T Horn Gear   Vekt: 64g Hastighet: 0.13s Dragkraft: 24.0kg 7.4v Mål: 40 x 20 x 37mm Drev: Stål Kulelager: 2stk/pcs

895,-

995,-

KJØP
-10%
 Holder for the top lights.   Projektørholder til montering på taket av Tamiya Scania R620 / R470. Projektørholderen er laget i forniklet messing. Det medfølger klart og blått lykteglass - mulighet for indbyggning av LED lys

939,-

1.199,-

KJØP
-22%
Weight: 9.0g Size: 42 x 23 x 14mm Channels: 7 Voltage: 4.8-8.4V Connector type: Standard Case: Hard Modulation type: Advanced 2.4GHz

339,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png