Hopp til innhold

Absima 150CPS / 15WT Silicone Shock Oil 60ml

Art.nr: 3030002

79,-

Absima

Absima

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Høykvakitets Silicone demper olje med viskositet 150.

En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet!

60ml flaske.

Produsent

Kunder kjøpte også

Description: Replacement springs for the Big Bore Go series, with sets specific to each damper length!     Feature:   For: Big Bore Go 55mm Damper Material: Steel Color: Black   Include:   Soft Springs - Red (4 pcs) Medium Springs - Yellow (4 pcs) Hard Springs - Blue (4 pcs)

89,-

KJØP
Yeah Racing QUTUS Slider 55mm Damper Set for 1/10 RC Drift Car Black Description: Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much dampening you require. Choice from 1 to 5 holes open in the piston will allow you to tune the damper matching to your track conditions. The D-Bore features drift tuned springs in both soft and hard variations, perfect for drifting on low and high grip surfaces.If adjustable pistons aren't your thing, traditional "fixed" pistons are also included in two, three and four hole variants. The shock body has been updated to be of "big-bore" spec. which fills more oil than traditional dampers which gives much more consistent handling in both cold and hot temperatures. Soft, Medium and Hard springs have been included as well.     Feature: Quick Hydraulic Tune System 4, 6 Stages Of Adjustment Or 3 Different Fixed Pistons CNC Machined Selected Anti-Leak O-Ring Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation Big Bore Include: QUTUS Dampers (4 pcs) Adjustable Pistons (8 pcs) Fixed Pistons (8 pcs) Hard Springs (4 pcs) Soft Springs (4 pcs) Damper Oil (1 bottle) Manual:

559,-

599,-

KJØP
-7%
Description: This is Yeah Racing 180 87T Brushed Motor w/11T Pinion For Traxxas TRX-4M.   Feature:   For : Traxxas TRX-4M / Micro RC Material : Metal 87T Motor Japanese Fuyong high-quality carbon brush Wear-resistant iron-based oil-impregnated bearings 180°C high temperature copper wire Stator movement 0.5mm steel material Magnetic tile N38 high performance ferrite Use pom high-quality insulation material 11T brass gear x 2pcs No-load speed 15000rpm@7.4V No-load current≤0.16A Soldered  Direct connection with TRX4M ESC   Specification:   Weight :46g Size : 32 x 20.5 x 15.5 mm   Include:   180 87T Brushed Motor w/11T Pinion (1 pc)

109,-

139,-

KJØP
-22%
Yeah Racing 1/10 RC Rock Crawler Accessory Tool Set Axes Digging Shovel Oil Tank High Jack Winch Pry Bar (Red) Description: This is Yeah Racing 1/10 RC Rock Crawler Accessory Tool Set. *Photos for reference only. Feature: For: 1/10 RC Rock Crawler Material: Plastic Color: Pre-painted Include: Tool Set (1 Set)

149,-

KJØP
Traxxas 9781-SATIN Wheels, 1.0", Method Race Wheels® 105 Beadlock (satin chrome, beadlock) (2) Functional Method 105 beadlock wheels look great on your TRX-4M™ and provide maximum grip on the tire bead. Beadlock wheels work with standard TRX-4M tires and the optional 9782 Mickey Thompson® Baja Pro X® off-road tires. Add the optional 9780 brass wheel weights to give your TRX-4M even more stability for tough technical maneuvers. Includes inner and outer rims (2), center barrels (2), and mounting screws (12). Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

119,-

KJØP
Wheel Hubs Hex 7mm Brass (4) TRX-4M Wheel hubs, 7mm hex, brass (1 gram each) (4)/ axle pins (8) Set of four brass wheel hubs adds valuable weight to the lowest part of your TRX-4M™ for improved anti-rollover stability. Includes axle pins (8)

159,-

179,-

KJØP
-11%
Traxxas 9769 Tires, Canyon Trail 2.2x1.0" (2) Canyon Trail ™ tires are scaled versions of standard TRX-4 rubber with aggressive lugs for dynamic traction. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Mount them on your stock 1.0" TRX-4M wheels or optional 9781 beadlock wheels. Sold as a pair. Replacement part for these models: TRX-4M 1/18 Land Rover® Defender® Accessory part for these models: TRX-4M 1/18 Ford® Bronco®

109,-

139,-

KJØP
-22%
Traxxas 9780 Wheel weights, brass (31 grams each) (2) (requires #9781 series wheels) Each wheel weight adds 31 grams to the lowest part of your TRX-4M™ for improved anti-rollover stability and superior rock-climbing capability. Brass wheel weights replace the standard beadlock barrels and must be used with 9781 beadlock wheels. Sold as a pair. Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

259,-

289,-

KJØP
-10%
Traxxas 9791R Transmission, complete (low range (crawl) gearing) (40.3:1 reduction ratio) (includes Titan® 87T motor) Give your TRX-4M™ unstoppable torque with this low-range transmission. The transmission features an ultra-low 40.3:1 reduction ratio for maximum rock-climbing power. Traxxas Pro Built® transmissions come professionally assembled with a fresh new Titan® 180 87-turn motor. There’s no gear mesh to adjust or parts to align. The assembly bolts in as a complete unit for quick and easy installation. Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

519,-

569,-

KJØP
-9%
This is a pair of pre-mounted Hyrax 1.9" Tires. The future of 1.9" TirePerformance has arrived with Pro-Line's all-new Hyrax Tire! Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything your Scale Adventure might throw at you. The Hyraxfeatures an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line's Legendary G8 material, so you know it provides performance you can depend on. The Hyrax 1.9" tire comes conveniently pre-mounted to our Impulse Black Plastic 1.9" wheels that are Proudly Made in the USA! These all-new Impulse wheels are designed to not only look scale but to be super easy to use by only requiring 6 screws per wheel for mounting tires. The unique 3-piece plastic wheel design bolts together in the back and locks on to Pro-Line's incredible list of 1.9" Crawling Tires. The back of this 12mm hex Rock Crawling 1.9" wheel also accepts Pro-Line's Brass Brake Rotor Weights (sold separately) for additional looks and performance. The overall wheel width and wheel offset are the same as Pro-Line's line of 1.9" Aluminum Pro-Forge Wheels, so you know they will fit your truck and look good doing it. Be the first on your block to get the Hyrax 1.9" tires mounted to Pro-Line's new 1.9" Black Impulse wheels. Height:   4.73" (120mm) Width:   1.76" (45mm)

649,-

699,-

KJØP
-7%
This is the Castle Creations Castle Link V3 USB Programming Kit. Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10* FEATURES Simple programming interface for the Castle Creations Phoenix, Talon,Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle Creations external switching regulators (BECs) Air users can customize values for low voltage cutoff, prop brakestrength, governor gain and more Suface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Demo mode checks available settings without connecting device to computer Downloadable updates INCLUDES Castle Link V3 USB Programming Kit with Standard USB Cable COMMENTS *Macintosh users may use software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

379,-

439,-

KJØP
-14%
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
1:10 Brushed Motor 540 size 10 Turn 170W 36.500RPM 7.2V - 7.4V Length housing: 53.2mm Diameter housing: 35.70mm Length shaft: 12.3mm Diameter shaft: 3.17mm

359,-

389,-

KJØP
-8%
Futaba R304SB-E T-FHSS Receiver A new small and light 4 channel T-FHSS 2.4GHz receiver with telemetry (sensors available separately and are connected through the S.BUS2 port). The R304SB-E receiver has no external antenna so it's recomended for electric cars only.   T-FHSS 2.4GHz (Telemetry) receiver for T4PV, T4PM, T4PLS, T4GRS, T4PX & T4PX-R Internal antenna (for electric cars) Size: L35 x W23.3 x H8.5/12.5 mm Weight: 6.7 g Power: 4.8-7.4V batteries (Voltage range: 3.5-8.4V) Spec. Frequency: 2,4GHz Signal system: T-FHSS Length: 35 mm Height: 12,5 mm Width: 23,3 mm Input Voltage: 4,8-7,4 V Channels: 4 Special Functions: High Voltage , S.Bus , S.Bus2

749,-

799,-

KJØP
-6%
Big bore shock technology from the on-road shocks transplanted onto off-road shocks! Gain more consistent handling through the enlarged shock bodies which houses more shock oil! Included is already a spring attached, so all you have to do is add oil and mount it to your rig! No more tedious assembly required!   Feature: For: Traxxas 1/10 Slash ,Stampede, Bandit, Arrma  Material: Aluminum Color: Red   Include: TR-XB Big Bore Shocks (2 pcs)

299,-

329,-

KJØP
-9%
M-DRIVE - Body Reamer 0-9mm with Protective Cap High quality light weight body reamer with black anodized aluminium handle and a super sharp conical HSS cutting blade that cuts perfect 0-9mm holes in Lexan bodies. A light weight aluminium protective cap is also included. Specs: Handle: Black anodized aluminium Handle Size: 14x75mm Laser Engraving: M-DRIVE logo + size Cutting Tool Size: 0-9x41mm Weight (including the protective cover): 28g Suitable for: Making round holes up to 9mm in diameter in Lexan bodyshells

279,-

299,-

KJØP
-7%
M-DRIVE - Screws & Nuts Tray Magnetic - 11x88x106mm - Gold A practical and simple gold anodized aluminium tray with an magnetic pad that keeps your screws and nuts in place while dissassembly your rc vehicle. Also available with black anodizing. Specs: Height: 11mm Length: 106mm Width: 88mm Weight: 37g

59,-

KJØP
Hudy Chassis Ride Height Gauge 0 to 15 mm (Beveled) For checking ride height of all RC cars Bevelled scale has ride height markings from 0-15mm in 0.5mm increments CNC-machined, made of high-quality lightweight duraluminum Elox-coating for smooth, long-lasting finish Engraved with HUDY logo and scale

339,-

KJØP
This is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded from  white plastic. This spur gear is for use with Traxxas' slipper clutch. Includes: 1 78 tooth 48 pitch spur gear.

39,-

KJØP
This is a 48 pitch 84 tooth spur gear from traxxas.  The gear is molded from black plastic.  This spur gear is for use with Traxxas' slipper clutch. Includes:  1 84 tooth 48 pitch spur gear.

39,-

KJØP
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
Yeah Racing Aluminum Big Bore Go 60mm Damper Set 4pcs for 1/10 RC Touring Car Black Description: Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (4 pcs) Springs (12 pcs) Pillow Balls (8 pcs) Ballstuds (8 pcs) Threaded Ballstuds (8 pcs) Pistons (8 pcs)

479,-

499,-

KJØP
-4%
WLToys 144010 Buggy RSR 1/14 4WD Børsteløs - Børsteløst oppsett - Komplett - 70km/t! Børsteløs utgave av WLToys Buggy RSR i 1/14-skala med 4WD. Meget rask bil med mye bruk av solide aluminiumsdeler. Leveres komplett med oppladbart LiPo-batteri og 2.4GHz rattradio. Bilen er 31cm lang og har en toppfart opp mot 70km/h. Det følger med lader så det eneste som trengs i tillegg her er 4stk AA-batterier til radioen.   1/14-skala Bilen er 1/14-skala så som er en rå kombinasjon med det kvikke børsteløset oppsettet! Drivaksler ut til hjulene er i metall og bilen har blant annet dempertårn og chassis i aluminium. Uavhengig hjuloppheng både foran og bak samt piggdekk og kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Denne versjonen har også kjølevifte til ESC og kjøleribbe til motor påmontert.   Batteri Bilen leveres med ett 2S 1500mAh LiPo-batteri med Deans-type kontakt. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AA-batterier, dette må kjøpes i tillegg. Lader er av USB-typen og kan lade batteriet på noe over 2 timer avhengig av powersupply. Ønsker man lader som kan brukes rett i støpsel eller på 12V, lader raskere og har kontroll på ladetid, spenning med mer så ligger det alternativ lader som tilbehør. Husk da også å kjøpe med deans-ladekabel.     Spesifikasjoner Lengde 310mm Bredde 205mm Høyde 110mm Motor Børsteløs Batteri 2s 1500mAh Lipo m/Deans Kjøretid Ca. 10min Ladetid Ca. 2t Rekkevidde 100m+ Skala 1/14 Vekt 888g   Eskens innhold 1x RC Buggy 1x Radio 2.4GHz 1x Batteri 1x USB-Lader 1x Manual 1x Small cross sleeve    

1.895,-

1.995,-

KJØP
-5%
Yeah Racing YBS-0024 STEEL BEARING SET (22PCS) FOR TRAXXAS TRX-4M Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Features: For : Traxxas TRX-4M Material : Steel Shielding: Rubber & Metal   Includes: Total Bearings (22 Pcs) -YB6005B  (3x6x2.5mm) (8pcs) -YB6009B  (4x8x3mm) (4pcs) -YB6011B  (5x8x2.5mm) (4pcs) -YB6020B  (8x12x3.5mm) (2 pcs) -YB6056M  (3.5x7x2.5mm) (4pcs)

179,-

199,-

KJØP
-10%
 This is a 46ml Jar of Tamiya color Acrylic Paint (Thinner). FEATURES: Made from water-soluble acrylic resins and are excellent for either             brush or spray painting.           Can be used on styrol resins, styrofoam, wood, plus all of the common             model plastics.           It covers well, flows smoothly with no blushing or fading, and can             be blended easily.           Glass jar with a color coded, screw-on lid.           Paint number X-20A on the Tamiya Color Chart.   INCLUDES: One Jar of Acrylic Paint (Thinner)   REQUIRES: Stir Stick   SPECS:    Volume:  46ml

55,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png