Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servoer / Reservedeler / Servo Gear Set SC-1251MG
-8%

Servo Gear Set SC-1251MG

Art.nr: SG-SC1251MG

239,-

259,-

- 8%
Savox

Savox
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Savöx Gear Set for SC-1251MG

Produsent

Savox

Savox

Kunder kjøpte også

Hovedbilde Power HD 1812MG Waterproof 18kg Hovedbilde Power HD 1812MG Waterproof 18kg
Power HD 1812MG Waterproof 18kg
Power HD 1812MG Waterproof 18kg En god og solid vanntett servo med metallgir for de fleste formål. Med en styrke på 18kg er den godt egnet for alt fra bil til fly og øvrige hobbyprosjekter. Benytter servohorn med 25T (Futaba) splines.   Vekt 56 gram uten ledning Mål 40,7 x 20,5 x 39,5 mm Egnet for 4,5 - 6,0 volt Holdekraft 18kg/cm Hastighet 0.12sec/60° (uten belastning) Temperatur    -20 til 50 grader Presisjon 4us

299,-

329,-

KJØP
-9%
Hovedbilde Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC Hovedbilde Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC
Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC
Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC Best value for money, Easy to use The new 10BL120 G2, takes the outstanding quality and durability of proven HOBBYWING platforms and makes it even easier to use and setup. The perfect choice for 10th scale setups. Upgraded BEC The BEC's continuous output current has been upgraded from 3A to 4A. The maximum current is at 7A, and the output voltage is now 6V/7.4V adjustable. Hobbyist will be able to use high-voltage and powerful servos available on the market with greater control. Boost/Turbo timing technology The 10BL120 G2 features adjustable electronic timing. Turbo and Boost can be used to fine tune power delivery and get the most out of your setup. Up to 32 degrees of electronic timing is available. Note: Boost and Turbo timing cannot be used with a 3S battery to prevent damage. Multiple programming/tuning methods are supported Works with the Multifunction LCD programming Box Pro, The Multifunction LCD Programming Box (Non pro), the LED Programming Box, and has on board button/led tuning. Specs: Type: 1/10 Brushless & Sensored ESC Waterproof: No Cont./Peak Current: 120A/760A Input Voltage: 2-3S LiPo BEC Output: Switch Mode 6V/7.4V @ 4A Input Wires: 12AWG-200mm Output Wires: 12AWG-200mm Input Connectors: No Output Connectors: No Fan Size: 25x25x10mm Fan Output Wires: 5-8.4V Fan Input Connectors: Powered by BEC Firmware Upgrade: Not Supported Size: 43x36.8x32.3mm Weight: 101.5g Motors: Sensorless / Sensored Brushless Motor Vehicles: 1/10 Touring, Buggies & Drift Cars KV Rating/T Count: 2S Lipo ≥4.5T, 3S Lipo ≥10.5T - 3650 Size Motors ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Pro Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port

699,-

849,-

KJØP
-18%
Hovedbilde Traxxas 2518 Shock Tower Front Fiberglass Nitro ...
Traxxas 2518 Shock Tower Front Fiberglass Nitro ...
Shock tower, fiberglass (front) (requires part #2669)

79,-

KJØP
Hovedbilde Tamiya 86048 PS-48 Polycarb Spray Metallic Silver 3 oz
Tamiya 86048 PS-48 Polycarb Spray Metallic Silver 3 oz
 This is the Tamiya Color Spray Paint for Polycarbonate Bodies                           (PS-48 Metallic Silver)                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling           An appropriate amount of paint for finishing one R/C model           This paint is impervious to oil and fuels, so it can be safely             used on gas-powered R/C bodies           The color of the lid represents the color of paint INCLUDES: One Tamiya PS 48 Metallic Silver Color Spray Paint SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.                    Highly flammable.

169,-

199,-

KJØP
-15%
Hovedbilde Tamiya 54026 Aluminum Propeller Shaft & Joint TT01 ...
Tamiya 54026 Aluminum Propeller Shaft & Joint TT01 ...
 This is the optional Propeller (Driveshaft) and Joint Set for the             Tamiya TT-01, TT-01D, TT-01 Type E and TT-01R Chassis. FEATURES: Constructed of aluminum, anodized blue in color           Replaces the stock Driveshaft (SB1, C6) Rear Joint (SB2, C5) and             Front Joint (SB3, C4) INCLUDES: Driveshaft and two Joints with instruction sheet REQUIRES: Installation following instructions on enclosed sheet SPECS:    Driveshaft Length:   6.6"  (168mm)           Driveshaft Diameter: 0.24" (6mm)           Front Joint Length:  1.3"  (33.5mm)           Rear Joint Length:   1.6"  (41mm)

209,-

229,-

KJØP
-9%
Hovedbilde Tamiya 58701 OPEL CALIBRA V6 CLIFF (TT-01E) NO ESC Hovedbilde Tamiya 58701 OPEL CALIBRA V6 CLIFF (TT-01E) NO ESC
Tamiya 58701 OPEL CALIBRA V6 CLIFF (TT-01E) NO ESC
A Fine Vintage The cars in the 1995 German DTM touring car series were finely honed beasts, battling it out over twenty-four races in six countries. Opel, Mercedes-Benz and Audi cars took part; six Opels from two teams took to the track, including this Calibra V6 clad in a striking black livery bearing the name of title sponsor Cliff, and piloted by JJ Lehto. This R/C model assembly kit depicts the car in style, with the two-door coupe body molded in lightweight polycarbonate and stickers included to recreate markings.       ★Left: This image gives a close-up on the stylish silver color dish wheels and slicks, housed under the distinctive fenders. ★Right: Separate injection molded plastic parts depict the side mirror (stickers are used for mirror surface) and wiper.       ★Left: The front of the full-size car had a complex design for cooling and downforce, realistically depicted by this model in scale. ★Right: The dynamic combination of large rear wing and long stays is a one-piece depiction. Stickers recreate the Opel logo and more.   Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a three-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Silver dish wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!       ★Left: Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive. ★Right: A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion.       ★Left: This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car. ★Right: Damper stay and gear cover are separate parts; the stay features two different damper attachment holes to choose from.   Specifications ★Length:448mm, width: 185mm, height: 128mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm ★Bathtub type chassis frame ★Longitudinally-mounted motor, shaft-driven 4WD ★Front & rear 3-bevel differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front & rear friction dampers ★Gear ratio = 8.35:1 ★Type 540 motor ★Requires an Electronic Speed Controller (sold separately)   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

1.495,-

1.695,-

KJØP
-12%
Hovedbilde Yeah Racing YB0082BX Bearing Set Oil For 1:10 Tamiya ... Hovedbilde Yeah Racing YB0082BX Bearing Set Oil For 1:10 Tamiya ...
Yeah Racing YB0082BX Bearing Set Oil For 1:10 Tamiya ...
Yeah Racing RC PTFE Bearing Set with Bearing Oil For 1:10 Tamiya TT01 & DF02 RC Touring RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Telfon Bearing For Tamiya TT01 & DF02 RC Touring #YB0082BX Material: Metal   Includes: Bearing (16Pcs) Bearing Oil (15ml) #YA-0215   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

199,-

KJØP
Hovedbilde Yeah Racing DSG-0050GM SHOCK-GEAR 50MM DAMPER SET FOR ... Hovedbilde Yeah Racing DSG-0050GM SHOCK-GEAR 50MM DAMPER SET FOR ...
Yeah Racing DSG-0050GM SHOCK-GEAR 50MM DAMPER SET FOR ...
Yeah Racing Shock-Gear 50mm Damper Set for 1/10 RC Touring Car GunMetal #DSG-0050GM Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for extra reducing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the compression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.             Manual:     Feature:   For: 1/10 RC Cars Material: Aluminum Color: GunMetal CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation   Specification:   50mm Hole to Hole   Include:   Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Super Soft) (4 pcs) Spring Yellow (Soft) (4 pcs) Spring Blue (Medium) (4 pcs) Spring White (Hard) (4 pcs) Spring Black (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc)   Yeah Racing Shock-Gear 50mm Damper Set for 1/10 RC Touring M-Chassis Car GunMetal Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for extra reducing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the compression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car. *Photos for reference only. Feature: For: 1/10 RC Cars Material: Aluminum Color: GunMetal CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation 50mm Hole to Hole Include: Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Super Soft) (4 pcs) Spring Yellow (Soft) (4 pcs) Spring Blue (Medium) (4 pcs) Spring White (Hard) (4 pcs) Spring Black (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc) Manual:  

429,-

459,-

KJØP
-7%
Hovedbilde RC4WD E0009 1/10 Mini Warn 9.5cti Winch Hovedbilde RC4WD E0009 1/10 Mini Warn 9.5cti Winch
RC4WD E0009 1/10 Mini Warn 9.5cti Winch
RC4WD 1/10 Mini Warn 9.5cti Winch     One of the most iconic names in off-road. This is an all new RC4WD 1/10 Mini Warn 9.5cti Winch. This winch offers ultra scale looks, and superior quality and craftsmanship. Officially Licensed by Warn.     Specifications: CNC Machined Billet Aluminum Stamped Steel Components Working Spring Loaded Warn Hook Synthetic Winch Rope Highly Detailed Full Warn Decals Installed Operating Voltage: 6V - 12.4V Can operate on 3 Cell Lipo Load Limits: Dead Lift 6.6lbs / 3kgs Load Limits: Rolling Drag 9lbs / 4.1kgs 30 Day Warranty Height: 1.23in / 31.3mm Length: 2.80in / 71.3mm Width: 1.11in / 28.2mm Weight: 2.79oz / 79.2g         Shown installed on RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set for example (Not Included)         What's Included: 1x RC4WD 1/10 Mini Warn 9.5cti Winch 4x M2.5 x 4mm SHCS (Black) 4x M2.5 x 6mm SHCS (Black) (Z-S0855) 1x Warn Decal Sheet   Required Parts: RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set (Z-E0130) RC4WD Wired Winch Control Unit (Z-S1089)   Optional Parts: RC4WD ARB Winch Snatch Block (Z-S0341) RC4WD Warn 1/10 Premium Winch Hook (Z-S1551) RC4WD 1/10 Warn Mini Hawse Fairlead (Z-S1705) RC4WD Poison Spyder Fairlead for Mini Warn 9.5cti Winch (Z-S1858) Metal Front Winch Bumper for Traxxas TRX-4 Land Rover Defender D110 (VVV-C0469) Rhino Front Bumper for 1985 Toyota 4Runner Hard Body (VVV-C0755) RC4WD Warn Epic Sidewinder (Chrome) (Z-S1997) RC4WD WARN Epic Hyperlink (Chrome) (Z-S1999) RC4WD WARN Epic Hyperlink (Black) (Z-S2000) Rough Stuff 1/10 Aluminum Fairlead for RC4WD 1/10 Mini Warn 9.5cti Winch (VVV-C1124）   Replacement Parts: Replacement Motor/Gearbox for Warn 9.5cti 1/10 Winch (Z-E0051) 1/10 Warn Hook (Z-S1011) Synthetic Winch Rope (Z-S0038)   Replacement Hardware: 2x M3 x3mm Set Screws (Black) (Z-S0124) 4x M2 x5mm SHCS (Sliver) 4x M2 x5mm FHCS (Sliver) 2x M2 x4mm SHCS (Sliver) (Z-S0927)   Notes: Fits RC4WD Jeep JK Rampage Recovery Bumper to fit Axial SCX10 Chassis (Z-S0434) Fits Tough Armor Winch Bumper with Grill Guard for Axial Jeep Rubicon (Z-S1193) Fits RC4WD ARB Front Winch Bar Bumper for Gelande II D90/D110 (Z-S0853) (With Change Fairlead) Fits RC4WD Marlin Crawler Front Plastic Tube Bumper for Trail Finder 2 (Z-S0594) (With Mount Plate Reversed) Fits Tough Armor Front Tube Bumper w/Winch Mount for Trail Finder 2 (Z-S0765) (With Mount Plate Reversed) Fits Tough Armor Winch Bumper with Grill Guard to fit Axial SCX10 (Z-S0160) (With Mount Plate Reversed) Fits RC4WD Marlin Crawler Front Winch Bumper for Trail Finder 2 (Z-S1496) (With Mount Plate Reversed and Change Fairlead) Please check for bumper compatibility when selecting a fairlead for this Mini 9.5cti   Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries and used under license to RC4WD.

479,-

499,-

KJØP
-4%
Hovedbilde Tamiya 86040 PS-40 Polycarb Spray Translucent Pink 3 ...
Tamiya 86040 PS-40 Polycarb Spray Translucent Pink 3 ...
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-40 Frost Pink).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png