Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Art.nr: TRX 2250

Copied

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time. Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP

-10%

Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...

Art.nr: TRX 2280

Copied

Traxxas 2280 - 1/10 Brushless Servo with Full Aluminum Case New Top-of-the-Line 1/10 Servo with Full Aluminum Case! 2280 Specs & Features: High Torque: 43kg/cm 87% more torque than stock Sledge servo 5X more torque for TRX-4 with 2262 external BEC High Speed: 0.13 sec/60° Twice as fast as stock Sledge Full Aluminum Heat Sink Case Full Steel Gears with steel output Brushless motor technology Waterproof Dual ball bearings Factory fit for drop-in installation into 1/10 scale Traxxas models* * Does not fit Traxxas 4-Tec, XO-1, Spartan, or Jato. Some models may require modification. For installation with TRX-4 models with XL-5HV ESC, use Traxxas external BEC (2262) and steel servo horn (8247X).

1.695,-

1.995,-

KJØP

-15%

Futaba T6K-V3S Radio Mode-2 R3008SB T-FHSS

Art.nr: 05003171-3

Copied

Futaba T6K-V3S Transmitter Mode-2 – 8-Channel Digital Proportional RC System - R3008SB MODE-2: This transmitter is Mode-2, with the throttle on the left hand stick and elevator on the right stick! T-FHSS AIR/S-FHSS 2.4 GHZ MULTI FUNCTION 8-CHANNEL TRANSMITTER: The Futaba 2.4 GHz T-FHSS Air system/S-FHSS system is employed. TELEMETRY SYSTEM (CAN’T BE USED IN CASE OF S-FHSS): A T-FHSS Air bidirectional communication system is used. The voltage of the battery mounted in the fuselage can be displayed at the transmitter during flight. Altitude, temperature, RPM, current, and voltage data can be displayed at the transmitter by installing various optional telemetry sensors in the fuselage. SPEECH FUNCTION (T-FHSS ONLY): Telemetry data can be listened to by plugging commercial earphones into the transmitter. BUILT-IN ANTENNA: Antenna built into the transmitter provides a simple appearance and improves handling ease. S.BUS/S.BUS2 SERVO SETTING FUNCTION: S.Bus/S.Bus2 servo channel and various functions can be set by connecting the servo to the transmitter. POWER-SAVING TYPE TRANSMITTER: Four AA’s alkaline batteries can be used. Alternate options: HT5F1800B (NiMH 6.0 V, 1800 mA) FT2F1700BV2 (lithium-ferrite 6.6 V, 1700 mA) FT2F2100BV2 (lithium-ferrite 6.6 V, 2100 mA) VIBRATION: A function that alerts the operator of various alarms by vibrating the transmitter can be selected. UNIQUE MODEL MEMORY SYSTEM: The transmitter body contains a 30 model memory. MIXING TYPE SELECTION: Fixed wing, helicopter, and glider mixing type can be selected to match the fuselage. In addition, 6 swash plate types can also be selected for helicopters. Multi-copter selection is also possible. DIGITAL TRIM: Rapid trimming during flight is possible. The sound changes at the center of trim. The step size can be arbitrarily changed. The trim position is displayed on the LCD. LEVER HEAD ADJUSTMENT: The lever head length can be adjusted. Lever head shape that reduces slip during operation has been adopted. SWITCH/VR POSITION CHANGE AND AUX CHANNEL FUNCTION CHANGE: Mixing and other switches and VR can be selected. Since the function of the AUX channels (CH5-CH8) can also be changed, original mixing, in addition to existing mixing, can be created by using the programmable mixing function. MODEL DATA TRANSFER FUNCTION: Model data can be wirelessly transferred between 6K. Updates from T6K -> T6K V3S: 8 channel receiver (R3008SB) is included Switch D is changed from 2 positons to 3 positons Glider functions strengthened (Added wing type 2AIL-B, Trim-mix for rudder, conditions increased from 3 to 4) Timer (Added 1 more time and having 2 timers) Helicopter function (Governor gain added) YOUR T6K-V3S INCLUDES: T6K-V3S Transmitter R3008SB Receiver Switch harness TRANSMITTER SPECS: TRANSMITTER FREQUENCY: 2.4 GHz band SYSTEM: T-FHSS Air, S-FHSS, switchable POWER SUPPLY: 6.0 V Dry battery FREQUENCY BAND: 2.4 GHz RF POWER OUTPUT: 100mW EIRP R3008SB RECEIVER SPECS: SIZE: 24.9 x 47.3 x 14.3 mm WEIGHT: 10.1 g RATED VOLTAGE: DC 4.8~7.4V OPERATING VOLTAGE: DC 4.0~8.4V

2.995,-

3.295,-

KJØP

-9%

Traxxas 2996X Charger EZ-Peak Live 12A & 4S 5000mAh ...

Art.nr: TRX 2996X

Copied

Traxxas EZ-Peak Live Charger & 4s LiPo 5000mAh Battery Combo Set The #2996X 4S Completer Pack delivers ultimate power to your Maxx® for the speed and acceleration you crave. Punch the throttle and the 4-cell 5000mAh iD LiPo battery lights up the tires for blistering 60+mph speeds and long run times. Traxxas iD batteries are the easiest and safest Lipo charging solution when used with our exclusive iD chargers. You just plug in your iD battery and press start. The iD charger handles all the settings and quickly gives you an optimized charge every time. The new 4s capable EZ-Peak Live multi chemistry charger comes equipped with built-in Bluetooth to work with the new EZ-Peak Live app for iOS and Android. The app gives you detailed information and advanced operation through a high-definition color interface. Its our finest charger in the popular EZ-Peak iD lineup. This Combo Set is Suitable for these Traxxas Trucks: Maxx 4s X-Maxx 8s Unlimited Desert Racer OBS! Denne pakken inneholder: - TRX 2971 lader - TRX 2889X batteri

2.695,-

2.895,-

KJØP

-7%

Traxxas 8555 Driveshaft Center Rear (Fully Assembled)

Art.nr: TRX 8555

Copied

Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)

269,-

299,-

KJØP

-10%

Kyosho 32356GMW Mini-Z MR04 RWD Corvette C8-R Gun ...

Art.nr: 32356GMW

Copied

Latest high-performance MR-04 chassis Now the standard MINI-Z RWD model! Enjoy the full experience of high-performance R/C car racing right out of the box; just insert batteries into the car and transmitter. This is the simplicity of Kyosho Readyset packages. The small scale of the MINI-Z Racer is ideal for driving indoors and for people just becoming familiar with R/C cars. This MINI-Z RWD Readyset includes a renewed 2-wheel drive chassis at its core. Previous Readyset packages incorporated the 3rd generation MR-03 chassis, but the new RWD Readyset includes the 4th generation MR-04 chassis that was first released in 2023. While retaining some basic elements of the MR-03 design, the new MR-04 demonstrated its lower center of gravity and remodeled steering design with blistering speed and excellent handling in the top-of-the-line EVO2 debut model. The MR-04 chassis is mounted with R/C system and features a completed body finished to display model standard. This Readyset includes the same standard MR-04 chassis as other high-end MR-04 models and includes user-friendly 130-class brushed motor and the reliable Syncro KT-531P pistol grip transmitter. Just insert 4 x AAA alkaline batteries into both the car and the transmitter, and you’re ready for the fun to begin. High-performance comes straight from the standard setup, but you can tune up for elite-level performance with a wide range of MINI-Z optional parts. With its dynamic maneuverability display model finish, the updated MR-04 chassis takes the authentic R/C experience to a higher level. - Authentic EP (electric) small scale R/C car that can be driven indoors. - Readyset package includes fully assembled chassis, body and transmitter. - Includes ultra reliable multi-function Syncro KT-531P transmitter. - Features the MR-04 chassis, a major evolution from the previous MR-03 model. - Includes high-quality painted body with decals applied, finished to display model standard. - Geared differential (gear diff) delivers smooth cornering. - Full ball bearing specifications - Can be fitted with an optional gyro unit (MZW711) for even easier control. Gyro sensitivity can be adjusted using the volume on the chassis. - Compatible with wide range of MINI-Z Racer optional parts so you can enjoy tuning and enhancing your model. While retaining the best aspects of the MR-03, the lower center of gravity of the new MR-04 delivers significant performance improvements. The easier control of the MR-04 makes it an ideal introduction to R/C cars. New front knuckles with integrated kingpins reduce scrub by 1.5mm on each side compared to the MR-03, realizing sharper and more linear control. The change to 3mm inner diameter ball bearings also reduces rotational resistance. Front suspension dynamically aligns the camber angle with movement of the upper arm to maintain optimal tire contact during cornering. Revised caster angle also delivers improved steering response. The car is powered by four AAA alkaline or rechargeable nickel-metal hydride batteries. The batteries are mounted lower than the MR-03, lowering the center of gravity of the entire chassis to deliver improved cornering stability and straight-line handling. The rear suspension uses a coil spring damper to cushion shocks from the road surface and improve driving stability. It can also be upgraded to an optional oil-filled shock absorber. Flexibility of the T-bar rear suspension plate that holds the entire rear pod, including the motor and rear axle, produces excellent suspension effect. Optional parts are also available in FRP and carbon. In 2025, All axles are equipped with low rotational resistance ball bearings as standard. The same size ball bearings are used for both front and rear for spare parts efficiency. When changing from the standard body, a parts set is included to change the front tread (vehicle width) to match the non-standard body to be installed. Rear tread can be changed by changing the wheel offset. Includes Syncro KT-531P transmitter with a steering wheel that mimics the steering wheel of a real car and pistol-grip throttle (speed control). Adjust the neutral position of steering and throttle with trims, as well as steering angle with dual rate adjustment. It is also possible to operate in training mode with a reduced vehicle speed (training mode is the default setting).

2.995,-

3.495,-

KJØP

-14%

Kyosho 32358S Mini-Z MR04 RWD Porsche 911 GT3 RS ...

Art.nr: 32358S

Copied

Latest high-performance MR-04 chassis Now the standard MINI-Z RWD model! Enjoy the full experience of high-performance R/C car racing right out of the box; just insert batteries into the car and transmitter. This is the simplicity of Kyosho Readyset packages. The small scale of the MINI-Z Racer is ideal for driving indoors and for people just becoming familiar with R/C cars. This MINI-Z RWD Readyset includes a renewed 2-wheel drive chassis at its core. Previous Readyset packages incorporated the 3rd generation MR-03 chassis, but the new RWD Readyset includes the 4th generation MR-04 chassis that was first released in 2023. While retaining some basic elements of the MR-03 design, the new MR-04 demonstrated its lower center of gravity and remodeled steering design with blistering speed and excellent handling in the top-of-the-line EVO2 debut model. The MR-04 chassis is mounted with R/C system and features a completed body finished to display model standard. This Readyset includes the same standard MR-04 chassis as other high-end MR-04 models and includes user-friendly 130-class brushed motor and the reliable Syncro KT-531P pistol grip transmitter. Just insert 4 x AAA alkaline batteries into both the car and the transmitter, and you’re ready for the fun to begin. High-performance comes straight from the standard setup, but you can tune up for elite-level performance with a wide range of MINI-Z optional parts. With its dynamic maneuverability display model finish, the updated MR-04 chassis takes the authentic R/C experience to a higher level. - Authentic EP (electric) small scale R/C car that can be driven indoors. - Readyset package includes fully assembled chassis, body and transmitter. - Includes ultra reliable multi-function Syncro KT-531P transmitter. - Features the MR-04 chassis, a major evolution from the previous MR-03 model. - Includes high-quality painted body with decals applied, finished to display model standard. - Geared differential (gear diff) delivers smooth cornering. - Full ball bearing specifications - Can be fitted with an optional gyro unit (MZW711) for even easier control. Gyro sensitivity can be adjusted using the volume on the chassis. - Compatible with wide range of MINI-Z Racer optional parts so you can enjoy tuning and enhancing your model. While retaining the best aspects of the MR-03, the lower center of gravity of the new MR-04 delivers significant performance improvements. The easier control of the MR-04 makes it an ideal introduction to R/C cars. New front knuckles with integrated kingpins reduce scrub by 1.5mm on each side compared to the MR-03, realizing sharper and more linear control. The change to 3mm inner diameter ball bearings also reduces rotational resistance. Front suspension dynamically aligns the camber angle with movement of the upper arm to maintain optimal tire contact during cornering. Revised caster angle also delivers improved steering response. The car is powered by four AAA alkaline or rechargeable nickel-metal hydride batteries. The batteries are mounted lower than the MR-03, lowering the center of gravity of the entire chassis to deliver improved cornering stability and straight-line handling. The rear suspension uses a coil spring damper to cushion shocks from the road surface and improve driving stability. It can also be upgraded to an optional oil-filled shock absorber. Flexibility of the T-bar rear suspension plate that holds the entire rear pod, including the motor and rear axle, produces excellent suspension effect. Optional parts are also available in FRP and carbon. In 2025, All axles are equipped with low rotational resistance ball bearings as standard. The same size ball bearings are used for both front and rear for spare parts efficiency. When changing from the standard body, a parts set is included to change the front tread (vehicle width) to match the non-standard body to be installed. Rear tread can be changed by changing the wheel offset. Includes Syncro KT-531P transmitter with a steering wheel that mimics the steering wheel of a real car and pistol-grip throttle (speed control). Adjust the neutral position of steering and throttle with trims, as well as steering angle with dual rate adjustment. It is also possible to operate in training mode with a reduced vehicle speed (training mode is the default setting).

2.995,-

3.295,-

KJØP

-9%

Kyosho 32358OR Mini-Z MR04 RWD Porsche 911 GT3 RS ...

Art.nr: 32358OR

Copied

Latest high-performance MR-04 chassis Now the standard MINI-Z RWD model! Enjoy the full experience of high-performance R/C car racing right out of the box; just insert batteries into the car and transmitter. This is the simplicity of Kyosho Readyset packages. The small scale of the MINI-Z Racer is ideal for driving indoors and for people just becoming familiar with R/C cars. This MINI-Z RWD Readyset includes a renewed 2-wheel drive chassis at its core. Previous Readyset packages incorporated the 3rd generation MR-03 chassis, but the new RWD Readyset includes the 4th generation MR-04 chassis that was first released in 2023. While retaining some basic elements of the MR-03 design, the new MR-04 demonstrated its lower center of gravity and remodeled steering design with blistering speed and excellent handling in the top-of-the-line EVO2 debut model. The MR-04 chassis is mounted with R/C system and features a completed body finished to display model standard. This Readyset includes the same standard MR-04 chassis as other high-end MR-04 models and includes user-friendly 130-class brushed motor and the reliable Syncro KT-531P pistol grip transmitter. Just insert 4 x AAA alkaline batteries into both the car and the transmitter, and you’re ready for the fun to begin. High-performance comes straight from the standard setup, but you can tune up for elite-level performance with a wide range of MINI-Z optional parts. With its dynamic maneuverability display model finish, the updated MR-04 chassis takes the authentic R/C experience to a higher level. - Authentic EP (electric) small scale R/C car that can be driven indoors. - Readyset package includes fully assembled chassis, body and transmitter. - Includes ultra reliable multi-function Syncro KT-531P transmitter. - Features the MR-04 chassis, a major evolution from the previous MR-03 model. - Includes high-quality painted body with decals applied, finished to display model standard. - Geared differential (gear diff) delivers smooth cornering. - Full ball bearing specifications - Can be fitted with an optional gyro unit (MZW711) for even easier control. Gyro sensitivity can be adjusted using the volume on the chassis. - Compatible with wide range of MINI-Z Racer optional parts so you can enjoy tuning and enhancing your model. While retaining the best aspects of the MR-03, the lower center of gravity of the new MR-04 delivers significant performance improvements. The easier control of the MR-04 makes it an ideal introduction to R/C cars. New front knuckles with integrated kingpins reduce scrub by 1.5mm on each side compared to the MR-03, realizing sharper and more linear control. The change to 3mm inner diameter ball bearings also reduces rotational resistance. Front suspension dynamically aligns the camber angle with movement of the upper arm to maintain optimal tire contact during cornering. Revised caster angle also delivers improved steering response. The car is powered by four AAA alkaline or rechargeable nickel-metal hydride batteries. The batteries are mounted lower than the MR-03, lowering the center of gravity of the entire chassis to deliver improved cornering stability and straight-line handling. The rear suspension uses a coil spring damper to cushion shocks from the road surface and improve driving stability. It can also be upgraded to an optional oil-filled shock absorber. Flexibility of the T-bar rear suspension plate that holds the entire rear pod, including the motor and rear axle, produces excellent suspension effect. Optional parts are also available in FRP and carbon. In 2025, All axles are equipped with low rotational resistance ball bearings as standard. The same size ball bearings are used for both front and rear for spare parts efficiency. When changing from the standard body, a parts set is included to change the front tread (vehicle width) to match the non-standard body to be installed. Rear tread can be changed by changing the wheel offset. Includes Syncro KT-531P transmitter with a steering wheel that mimics the steering wheel of a real car and pistol-grip throttle (speed control). Adjust the neutral position of steering and throttle with trims, as well as steering angle with dual rate adjustment. It is also possible to operate in training mode with a reduced vehicle speed (training mode is the default setting).

2.495,-

3.295,-

KJØP

-24%

Traxxas 3370 Velineon VXL-3m Brushless Power System

Art.nr: TRX 3370

Copied

This is the Velineon VXL3m Extreme Brushless Power System from Traxxas. This is for the 1/16th scale VXL from Traxxas FEATURES: Ultra high temp sintered neodymium motor magnets Balanced rotor High speed ball bearings Low voltage detection Traxxas high current connectors 16-gauge wire INCLUDES: VXL3m ESC, TRX 3375 Velineon 380 Brushless Motor, TRX 3371 REQUIRES: Installation in vehicle SPECS: VXL3m ESC: Input Voltage: 6-12 cells NiMH, 2S to 3S LiPo Motors: Sensorless Brushless Motor Limit: None Continuous Current: 52A Peak Current: 326A BEC Voltage: 6.0Volts DC Transistor Type: MOSFET On-Resistance: 0.0005 ohms PWM Frequency: 12,000Hz Weight: 38g (1.34oz) Motor: Type: Sensorless Brushless RPM/Volt: 4000 (8-turn) Current Ratings: 25A constant/50A burst Max RPM: 50,000 Weight: 140g (4.94oz) Length: 48.15mm (1.9") Diameter: 28mm (1.1") Shaft Diameter: 2.7mm (0.11")

1.995,-

2.195,-

KJØP

-9%

Tilbud

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Kategorier

Nylige søk

Søkeresultater

Tilbud

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler

HPI El-Biler