Hopp til innhold
Hjem / Tilbud

Tilbud

Hovedbilde Hobbywing 38020389 XeRun AXE550L 3300KV Combo
Hobbywing 38020389 XeRun AXE550L 3300KV Combo
Art.nr: HW38020389
Copied
Hobbywing HW38020388 - AXE PLUS R3 ESC + AXE 550 R2 3300kV 2-3S Crawler Combo AXE PLUS R3 2-6S Crawler ESC 6S high-power crawler ESC: The ESC supports up to 6S LiPo battery It has a maximum output continuous current of up to 135A The AXE R3 can be used on 1/10th and 1/8 crawler, also compatible with 1/7 & 1/6 crawlers New compact design Compatible with all Axe R2 motors Note: The AXE R3 is 2.1mm longer, 1.7mm wider and 3.7mm shorter than the R2 ESC. Dual external control channels, real-time adjustment of parameters Connect the white and yellow signal cables to open channels of the receiver to adjust parameters in real time. FOC drive, linear, with plenty torque, and very quite The XeRun AXE R3 is equipped with a FOC drive system. The large torque and excellent linearity when operating at low speed further exceeds ordinary brushless power systems and out performs brushed power systems. The XeRun AXE R3 is nearly silent, and it’s the perfect choice for crawling vehicles. Smart torque output, easy to control The ESC automatically increases the torque output to overcome resistance and accelerate up the hill. Vice versa, the ESC automatically reduces the torque output and stabilizes the vehicle speed when going down the hill. Provides excellent control going Up, or Down hills. The ESC is powerful, with excellent linear control, which can meet the needs of the vehicle's low-speed climbing while also meeting the needs of violent start-up lifting, straight-line high speed, etc. Smart fan start and stop function The fan starts to operate automatically ONLY when the ESC temperature reaches the preset value. The smart start and stop function of the fan helps to save power, reduce noise, and also ensures that the ESC works in a good temperature range. High protection level The AXE R3 brushless system is now IP67 protected. It has excellent waterproofing and dust-proofing performance to cope with various climatic conditions. Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Do not submerge in water for a long time, otherwise the product may be damaged. Super Internal BEC It has a built-in powerful BEC with a maximum output current of 15A. The voltage is switchable between 6V/7.4V/8.4V and is suitable for various standard/high-voltage servos and peripheral electrical equipment on the market (such as light sets, winches, etc.). Built-in Bluetooth for Connecting the Mobile APP Directly The ESC has a built-in Bluetooth module. Parameter settings, data reading, firmware upgrade and other operations can be achieved by connecting the device to the mobile APP. Obtain AXE Running Status with Real-time Data Function with ease Connect the ESC to the HW Link mobile app and turn on the real-time data function. You are able to view throttle, voltage, current, temperature, speed and other data in real time, and obtain the ESC and motor operating status with ease. Note: The effective distance is only about 5m due to transmission distance of bluetooth. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2saved to the ESC. saved to the ESC. In addition, the module allows you to view Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Compatible with AXE R2 motors AXE R3 ESC supports both AXE 4274 R3, and AXE 550/540L/540 R2 motors. Note: AXE R2 motor, 2800KV/2100KV/1400KV/2300kv are recommended to use on 3-4S. Supports Flysky i-BUS2 Telemetry Achieve real-time ESC parameter adjustments using the I-BUS2 Telemetry on the Flysky NB4 controllers. Additionally, the data return function has been implemented to the Flysky NB4 remote controllers. You will be able to view data such as; battery voltage, motor speed, operating current, ESC/motor temperature, etc in real time on the remote control. Note: You are required to upgrade to the latest firmware on your remote control in order to use the I-bus2 functions. A vast variety of parameters The XeRun AXE R3 has a vast variety of parameters for adjustment. It has a total of 21 adjustable parameters and supports 24-degree adjustable Turbo timing. The maximum speed can be unleashed with good road conditions. ESC Specs: Scale: 1/10, 1/8, 1/7 & 1/6 Type: Brushless, sensored waterproof Crawler ESC Cont./Peak Current: 135A/600A Input Voltage: 2-6S LiPo (2-3S in this combo) BEC Output: Switch Mode 6V/7.4V/8.4V @6A Input Wires: 12AWG-265mm Output Wires: No Input Connectors: XT60 Output Connectors: No Size: 49.5x37.9x32.8mm (Height with fan) Weight: 126.5g (Including the weight of input line) Fan Size: 25x25x10mm Fan Voltage Range: 6-8.4V Fan Powered by: BEC Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported Applications: Motors: Only supports XERUN AXE R2/R3 motors Vehicles: 1/10, 1/8, 1/7 & 1/6 Rock Crawlers KV Rating/T Count: AXE R2 540/540L/550 & AXE R3 4274   Hobbywing XeRun AXE550 R2 Sensored Crawler Motor 3300KV Applicable to All Weather & Track Conditions Waterproof has been taken to a new level with the Axe System. Completely sealed ESC design with robust heatsink case design ensure the ESC is ready for anything you throw at it. The motor as well, is sealed, and combines a completely new sensor harness. No messy extra steps to make your system water proof. (Note: please dismantle and clean the motor and put some lubricant onto the bearings after using it in some harsh conditions.) Built-in High-precision Magnetic Encoder A high precision magnetic encoder is used in the motor to ensure precision and consistent information is provided to the ESC. This allows the ESC to have more information from the motor than standard “hall” type sensors and provides improved performance and efficiency. Low Cogging Torque The AXE R2 Motors have the extremely low cogging effect and torque pulsation. New Waterproof Sensor Port The brand new design of new waterproof sensor port has smaller size. Its wiring is simpler and more beautiful than AXR R1 system. Specs: Applications: 1/10 Crawlers Type: Brushless/Sensored Compatibility: Use only with the AXE R2/R3 ESC Pole Count: 4 KV Rating: 3300 LiPo cells: 2-3S No Load: 4.7A Diameter: 36mm Length: 63.8mm Shaft Diameter: 5mm Weight: 268g

3.195,-

3.395,-

KJØP
-6%
Hovedbilde SkyRC Q100 Neo Quad 100/240W AC/DC XT60 Hovedbilde SkyRC Q100 Neo Quad 100/240W AC/DC XT60
SkyRC Q100 Neo Quad 100/240W AC/DC XT60
Art.nr: SK-100223-02
Copied
Produktinformasjon Kompakt og brukervennlig Lad 4 batterier samtidig Smart effektfordeling Cut-Off beskyttelse SkyRC Q100 Neo er en kompakt firekanals AC/DC-lader for deg som ønsker å lade flere batterier samtidig. Laderen har opptil 100W ladeeffekt ved bruk av AC og opptil 240W totalt ved bruk av DC, fordelt over fire separate utganger. Q100 Neo støtter flere vanlige batterityper og har intelligent effektfordeling mellom aktive porter. Laderen bruker skrollehjul, knapp og har også innebygget balans og XT60-type tilkoblingspunkter. Fire utganger og fleksibel lading SkyRC Q100 Neo kan lade opptil fire batterier samtidig, med uavhengige ladeutganger for fleksibel bruk. Laderen støtter LiPo, LiHV, LiFe, LiIon, NiMH, NiCd og Pb-batterier, og kan brukes både med vanlig nettstrøm og ekstern DC-strømkilde. For full balansering av LiPo-batterier må både hovedkontakt og balanseringskontakt kobles til laderen. Bruk LiPo Balance-programmet, ikke LiPo Charge. Smart effektfordeling Ved bruk av flere porter fordeler Q100 Neo tilgjengelig effekt automatisk mellom aktive utganger. Når én port er ferdig med ladingen, kan mer effekt sendes videre til de gjenværende portene. Laderen kan også brukes som digital DC-strømforsyning med justerbar spenning fra 1,0V til 30,0V og strøm fra 0,1A til 6,0A.   Spesifikasjoner: Innspenning AC 100-240V, 50/60Hz Innspenning DC 10-30V Ladeeffekt AC Maks 100W Ladeeffekt DC Maks 240W totalt, 4 x 60W Ladestrøm 0,1-6,0A Balanseringsstrøm Maks 600mA Utladning hovedport 5W Utladning balanseringsport 10W, LiPo/4S Display 2.8" Fargeskjerm LiPo/LiFe/LiIon/LiHV 1-4S NiMH/NiCd 1,2-9,6V (1-8S) Pb 3S / 6S Størrelse 140 x 108 x 43,5 mm Vekt Ca. 491 g Viktig info!   Q100 Engelsk Manual Strømkabel

1.095,-

1.195,-

KJØP
-8%
Hovedbilde FLYSKY RECEIVER FS-SR8A Hovedbilde FLYSKY RECEIVER FS-SR8A
FLYSKY RECEIVER FS-SR8A
Art.nr: FS-SR8A
Copied
FlySky FS-SR8A ANT 8-kanals mottaker FlySky FS-SR8A er en kompakt og allsidig 8-kanals mottaker for RC-biler, båter og andre modeller som bruker FlySky ANT-protokoll på 2,4 GHz. Mottakeren er en videreutvikling av den populære FS-SR8 og byr på flere praktiske tilkoblingsmuligheter. Med støtte for PWM, PPM, iBUS og S.BUS kan den brukes i mange forskjellige RC-oppsett, enten du trenger tradisjonelle servoutganger eller ønsker å benytte en seriell signalforbindelse. Den kompakte størrelsen gjør FS-SR8A enkel å plassere selv i modeller med begrenset plass. Mottakeren har også doble antenner for stabil signalmottakelse og støtter funksjoner som RSSI og batterispenningsovervåking (BVD). Egenskaper 8-kanals FlySky-mottaker ANT-protokoll – 2,4 GHz Kompakt og plassbesparende design Doble antenner Støtter PWM, PPM, iBUS og S.BUS RSSI-støtte Batterispenningsovervåking (BVD) Firmware kan oppdateres Passer til RC-bil, RC-båt og andre RC-modeller Driftsspenning: 3,5–8,4 V Mål: 44,8 × 26,6 × 11,3 mm Vekt: ca. 10 g Kompatibilitet FS-SR8A bruker FlySky ANT-protokollen og må brukes sammen med en kompatibel FlySky ANT-radiosender. Merk: Denne mottakeren er ikke kompatibel med FlySky-radioer som kun støtter AFHDS 2A eller AFHDS 3. Kort fortalt En liten, lett og fleksibel 8-kanals FlySky-mottaker med flere signalalternativer og moderne funksjoner – et godt valg når du ønsker en allsidig ANT-mottaker til RC-modellen din. Kompatible radioer FlySky FS-SR8A (FS103) er en 8-kanals mottaker med ANT-protokoll og passer til FlySky-radioer som bruker ANT. Kompatible radioer inkluderer blant annet: FlySky FS-ST8 FlySky FS-ST16 FlySky FS-G4P FlySky FS-G7P FlySky FS-G11P Merk: FS-SR8A bruker ANT og er ikke kompatibel med FlySky-radioer som bruker AFHDS 2A eller AFHDS 3, som for eksempel FS-GT5 og Noble NB4-serien. Sjekk alltid at radiosenderen din støtter ANT-protokollen før kjøp.

399,-

439,-

KJØP
-9%
Hovedbilde Traxxas 9711 TRX-4M Ford Bronco Assembled Cyber Orange ...
Traxxas 9711 TRX-4M Ford Bronco Assembled Cyber Orange ...
Art.nr: TRX 9711-CYBER
Copied
TRX-4M Ford Bronco Assembled Cyber Orange Body TRX-4M® clipless bodies come ready to mount on your 1/18 scale truck right out of the bag. Constructed out of tough ABS plastic, the TRX-4M Bronco body faithfully captures all the details of the full-size Ford® Bronco in exacting 1/18 scale. Tinted windows, a spare tire carrier, rugged fender flares, side mirrors, and other molded body accessories give TRX-4M a truly authentic appearance. Just snap one onto your TRX-4M chassis and you're ready for fun and adventure!

649,-

699,-

KJØP
-7%
Hovedbilde Traxxas 10880 Differential Complete Front/Rear Mini ...
Traxxas 10880 Differential Complete Front/Rear Mini ...
Art.nr: 10880
Copied
Traxxas 10880 - Assembled Differential w/ 37-T Ring and 13-T Pinions The replacement differential comes completely assembled and ready to install with a 37-tooth ring gear and 13-tooth front and rear pinion gears. Fits front or rear.

439,-

469,-

KJØP
-6%
Hovedbilde Traxxas 10715-GRN Body Mini XRT Green
Traxxas 10715-GRN Body Mini XRT Green
Art.nr: TRX 10715-GRN
Copied
Is it time to replace your Mini XRT® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini XRT bodies come fully-trimmed and ready to mount with body cage & clipless latches, integrated cooling vents, and pre-applied decals.

569,-

599,-

KJØP
-5%
Hovedbilde Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 ... Hovedbilde Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 ...
Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 ...
Art.nr: FS001P
Copied
Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 mottakere   FlySky Noble NB4 Pro+ er den kraftigste modellen i NB4-serien. I tillegg til førsteklasses utførelse og et moderne design, imponerer NB4 Pro+ også med svært høy ytelse. Fjernkontrollen er utstyrt med tredje generasjon av 2,4 GHz AFHDS 3-protokollen, som gir ekstremt lav forsinkelse og presis kontroll. Det nye grensesnittet gjør den enkel å bruke, selv for nybegynnere, samtidig som det gir gode muligheter for ulike valgfrie konfigurasjoner. Senderen har en ultrarask 2-kanalsmodus som sikrer svært lav forsinkelse, slik at brukeren får presis kontroll selv i de mest nervepirrende øyeblikkene. 3,5-tommers skjermen er betydelig forbedret sammenlignet med forgjengeren, og har nå høy kontrast og lysstyrke, noe som gjør NB4 Pro+ svært godt egnet til utendørs bruk. I tillegg er USB-C-tilkobling, et forbedret batteri og et system med to batterier blant nyhetene. NB4 Pro+ leveres i et høykvalitets PVC-etui og inkluderer to mottakere, akkurat som forgjengeren.   Funksjoner Avansert og moderne radiosender Innebygd trener-/elevfunksjon Kompatibel med alle iBUS2-enheter og enkelte produkter fra Hobbywing, for eksempel Xerun AXE R2 ESC Fritt konfigurerbare kanaler Ergonomisk design med dreiehjul Kan brukes av både høyre- og venstrehendte Dobbelbatterisystem Intelligent RF-konfigurasjon Svært lav responstid Kan også brukes til simulatorer og lignende applikasjoner (aktivert som standard) Tekniske spesifikasjoner Egenskap Spesifikasjon Type 2,4 GHz ISM Frekvensprotokoll AFHDS 3 Programvareversjon Noble Pro V3.0 Antall kanaler 18 Sendereffekt 17,84 dBm RC-modeller Bil, båt, robot Rekkevidde >300 m (på bakken) Kanaloppløsning 4096 Batteri 1S (4,2 V) 4300 mAh LiPo + 3450 mAh 18650-batteri Varsel ved lav batterispenning < 3,65 V Antennetype Integrert enkeltantenne Skjerm 3,5" IPS-berøringsskjerm, 320 × 480 piksler Maskinvaretilkobling USB / USB-C Temperaturområde -10 °C til +60 °C Luftfuktighet 20–95 % Online-oppdatering Ja Mål 142,7 × 120 × 232 mm Vekt 670 g Dette følger med FlySky NB4 Pro+ radiosender FGr4B-mottaker med kabel FGr8B-mottaker med kabel Solid transportkoffert med nøkkel CNC-frest ratt USB-C-kabel Grepsskall i størrelse S og L Ekstra gasshendel Brukermanual Engelsk The FlySky Noble NB4 Pro+ is the most powerful model in the NB4 series. In addition to high-quality craftsmanship and modern design, the NB4 Pro+ also impresses with top performance. The remote control is equipped with the third-generation 2.4 GHz AFHDS 3 protocol, enabling extremely low latency and precise control. The new interface makes it easy to operate, even for beginners, and offers plenty of room for optional configurations. The transmitter features an ultra-fast 2-channel mode that ensures low latency, allowing users precise control even in the most hair-raising moments. The 3.5-inch display has been significantly improved compared to its predecessor and now boasts a powerful contrast and brightness, making the NB4 Pro+ ideal for outdoor use. Additionally, a USB-C input, a better battery, and a dual battery system are new. The NB4 Pro+ comes in a high-quality PVC case with two receivers, just like its predecessor. Features: Advanced, modern transmitter Includes trainer-student function Compatible with all iBUS2 devices and some Hobbywing products (e.g., Xerun AXE R2 ESC) Freely customizable channels Ergonomic design with swivel wheel Suitable for both right- and left-handed users Dual battery system Intelligent RF configuration Low latency Also usable in simulations and similar applications (enabled by default) Technical Data Type: 2.4GHz ISM Frequency Protocol: AFHDS 3 Software Version: Noble Pro V3.0 Channels: 18 Transmission Power: 17.84dBm RC Models: Car, Boat, Robot Distance: >300m (ground) Channel Resolution: 4096 Battery: - 1S / (4.2V) x 4300mAh LiPo - 3450mAh 18650 Battery Low Voltage Warning: < 3.65V Antenna Type: Built-in Single Antenna Display: 3.5-inch IPS touchscreen, resolution 320x480px Hardware Interface: USB/USB-C Temperature Range: -10°C to +60°C Humidity Range: 20% to 95% Online Update: Yes Dimensions: 142.7 x 120 x 232 mm Weight: 670g Package Contents: FlySky "NB4 Pro+" Transmitter Receiver: FGr4B and Cable Receiver: FGr8B and Cable Hard case including key CNC Steering Wheel USB-C Cable Grip Shell (S, L) Spare Throttle Lever Manual

6.995,-

7.995,-

KJØP
-13%
Hovedbilde Yeah Racing Aluminum Single Piece Motor Mount with ... Hovedbilde Yeah Racing Aluminum Single Piece Motor Mount with ...
Yeah Racing Aluminum Single Piece Motor Mount with ...
Art.nr: M06-013BU
Copied
Yeah Racing Aluminum Single Piece Motor Mount with Heat Sink (BU) for Tamiya M06 Description: The Tamiya's original version of the Mount Mount for M06 comes with 3 small washers which are difficult to assemble. To cope with this issue, we have produced modified alternatives which the Mount Mount and washers come in a single piece for racers' convenience. This Motor Mount comes with a small heat sink for further enhancing heat releasing performance Feature: For: Tamiya M06 Material: Aluminum Color: Blue Include: Motor Mount (1 pc) Heat Sink (1 pc) Screw (2 pcs)

249,-

269,-

KJØP
-7%
Hovedbilde Yeah Racing YBS-0019 BEARING SET (22PCS) FOR 1/8 ARRMA ... Hovedbilde Yeah Racing YBS-0019 BEARING SET (22PCS) FOR 1/8 ARRMA ...
Yeah Racing YBS-0019 BEARING SET (22PCS) FOR 1/8 ARRMA ...
Art.nr: YBS-0019
Copied
Yeah Racing RC PTFE Bearing Set with Bearing Oil For 1/8 Talion 6S,Kraton 6S,Typhon 6S,Senton 6S,Outcast 6S,Notorious 6S,1/7 Mojave 6S, Limitless 6S,Infraction     Description Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : 1/8 Talion 6S,Kraton 6S,Typhon 6S,Senton 6S,Outcast 6S,Notorious 6S,1/7 Mojave 6S, Limitless 6S,Infraction Material : Steel Shielding: Rubber   Specification:   YB6014B (5x11x4mm) (2pcs) YB6015B (6x10x3mm) (4pcs) YB6022B (8x16x 5mm) (10pcs) YB6048B (15x21x 4mm) (4pcs) YB6054B (8x19x 6mm) (2pcs)   Include:   Total Bearing (22 Pcs)

179,-

199,-

KJØP
-10%
Viser 91 til 99 (av 5625 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png