Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Lim & Teip / Lim-produkter / Zap-lim / Zap PT105 Zap-A-Gap Single Use .01 OZ (5)

Zap PT105 Zap-A-Gap Single Use .01 OZ (5)

Art.nr: PT-105

59,-

Zap

Zap
På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Perfekt for å ha i feltkassen og ypperlig for bruk ute i felten.
Nå er det slutt på tørket lim da du virkelig trenger å lime. Her kommer medium Zap i porsjonspakninger som passer de fleste felt reparasjoner.

No-Drip Tip
STRONG PERMANENT BOND
WORKS ON JUST ABOUT EVERYTHING

PT105 Zap-A-Gap Single Use .01 oz (5)

Zap’s most versitle product. Bonds virtually anything including wood (harder woods such as oak and plywood), veneers, rubber, leather, most plastics and oily surfaces. Gap filling qualities. Cures in 30 seconds or less. Accelerate the cure with Zip Kicker

Produsent

Zap

Zap

Relaterte produkter

 

Hovedbilde Zap A Gap CA+ 4OZ (6) PT05 (Medium)
Zap A Gap CA+ 4OZ (6) PT05 (Medium)
Art.nr: PT-05
Copied
Accelerate with Kicker Allows 7-10 seconds for positioning Cures in 20 seconds Fills Gaps Works best on: Aluminium, Ceramic Works best on: Metal, Wood, Rubber, Pottery, Most plastics, Product Description Fills gaps. Works well on harder woods such as bass and spruce. It even works on oily surfaces! Some uses besides hobbies and crafts include; jewellery manufacturing and repair, taxidermy, pool cue tips, darts, archery, knife making, mold and pattern making, furniture refinishing and antique repair, and for fishing; fly line splicing and fly tying. Wood turners and manufactures of custom wood products appreciate the ability of ZAP-A-GAP CA+ to help save their projects by filling in and bonding cracks that often occur in expensive hard woods. Allows 7 to 10 seconds for positioning.

399,-

429,-

KJØP
-7%

Kunder kjøpte også

Hovedbilde Tamiya 54861 Rally Block Tire Soft (2)
Tamiya 54861 Rally Block Tire Soft (2)
Merke TAMIYA Skala 1:10 Chassis MF-01X, TT-01, TT-02, TT-02 Type-S, TT-02 Type-SR, XV-01 Type Dekk Biltype Off-Road

139,-

KJØP
Hovedbilde Tamiya 53569 Clamp Type Aluminum Wheel Hub 6mm
Tamiya 53569 Clamp Type Aluminum Wheel Hub 6mm
These are Clamp Type 6mm Aluminum Wheel Hubs by Tamiya.  Fits TA04, TA03, TL-01 and F201 chassis cars.     FEATURES Plain silver aluminum construction (all parts).  High round cap head screws with a hexagon socket drive insert.  These wheel hubs are fastened with cap screws and prevent the 2x10mm  shaft from falling out as well as realize precise wheel attachment.  Illustrated reference guide.   INCLUDES (4) Wheel Hubs  (5) Shafts  (5) Cap Screws  (1) 1.5mm Hex Wrench   SPECIFICATIONS Wheel Hubs - Cap Screws -  Thickness: 6mm Diameter: 1.6mm  Inner Diameter: 2.5mm Length: 4mm  Outer Diameter: 12mm  Shaft Size -  Length: 10mm  Diameter: 2mm

269,-

KJØP
Hovedbilde Tamiya 53445 Silicone Damper Oil Hard Set
Tamiya 53445 Silicone Damper Oil Hard Set
Developed for oil-filled damper units on R/C cars. Maintains constant viscosity through a wide temperature range.  Hard Set: For race-tuned cars, rough surfaced circuits, etc Pink #800 Clear #900 Light Blue #1000 3 digit number show the viscosity of the oil (water viscosity is #1). The higher the number, the higher the viscosity.

149,-

KJØP
Hovedbilde Bronto Ladekabel - 4mm til JST
Bronto Ladekabel - 4mm til JST
Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 22AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med JST-plugg til 4mm bananplugger. Benyttes for lading av batterier med JST-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner Ledning 22AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 JST

79,-

KJØP
Hovedbilde ZAP PT-07 CA 2oz 56gr Pink
ZAP PT-07 CA 2oz 56gr Pink
Super-thin penetrating formula. Works great on most materials, especially Balsa and other soft woods. Excellent "wicking" action. Strengthens fiberglass cloth. Some uses besides hobbies and crafts include; jewelry manufacturing and repair, taxidermy, mold and pattern making, furniture refinishing and antique repair, auto detailing, archery, darts, and ceramic repair. Bonds in 1 to 5 seconds.   Superior Penetrating Formula Super Thin - Water like Viscosity Bonds and cures in 1-5 seconds Works on most materials Works best on: Aluminum China Cloth Fiberglass Metal Most Plastics Pottery Rubber Wood   Bottle size: 2 oz / 56 g

239,-

249,-

KJØP
-4%
Hovedbilde Traxxas 7542 Body Clips (12) Hovedbilde Traxxas 7542 Body Clips (12)
Traxxas 7542 Body Clips (12)
These are the Body Clips for the Latrax Rally Car from Traxxas. FEATURES Steel construction Sized for the 1/18 scale body on the Latrax Rally Car INCLUDES Twelve Body Clips

29,-

KJØP
Hovedbilde TRX-4M 970741 1/18 Ford Bronco Crawler Blue RTR Hovedbilde TRX-4M 970741 1/18 Ford Bronco Crawler Blue RTR
TRX-4M 970741 1/18 Ford Bronco Crawler Blue RTR
Nyhet fra Traxxas. Traxxas TRX-4M - 1/18 Ford Bronco Crawler RTR - Blue BIG FUN AND ADVENTURE IN A SMALLER TRX-4®! Introducing the TRX-4M, a new way to experience all the fun, adventure, and scale realism of the TRX-4 in a 1/18 platform. The TRX-4M bridges the gap between the 1/24 crawler scene and 1/10 scale quality and performance. Oil-filled shocks, steel frame rails, and powerful running gear give it superior capability anywhere you want to drive, inside or outside. Features: 1/18 Versatility and Capability Oil-Filled Shocks Class-Leading Turning Radius Clipless Body Mounting Waterprotected Electronics Heavy-Duty Steel Frame Rails High-Capacity 2-Cell LiPo Battery with iD® 2-Amp USB iD® Fast Charger Heavy-Duty Steering Servo Built-in Pro Scale® Lighting Capability Licensed ABS Bodies All-In-One ECM-2.5 Control Module Three Drive Modes Powerful Titan® 180 87T Motor LED Bumper Lights Full-Featured TQ Transmitter 4-Link Front & Rear Suspension High-Performance Tires Detailed Wheels Front and Rear Spools Heavy-Duty Center Driveshafts Low-CG Battery Placement Hex-Drive Hardware Full Line of High-Quality Accessories THE RIGHT SIZE FOR FUN The larger 1/18 size allowed Traxxas engineers to pack the TRX-4M with more innovation and performance. Larger tires, higher ground clearance, bigger axles, and a powerful motor work together for huge leaps in rugged capability. The innovative suspension geometry lets TRX-4M turn around and maneuver in a fraction of the space required by smaller 1/24 rigs. Bouncy, undamped springs are replaced with silky-smooth oil-filled shocks. Beautiful scale details are clearly visible. ALL-TERRAIN VERSATILITY The TRX-4M is designed to excel everywhere theres a fun path to drive. The smooth throttle response, high-torque motor, and 30% tighter steering radius allow the TRX-4M to easily take on indoor crawling scenes and precisely thread the needle through narrow gates. Outside, the larger wheels and tires and high ground clearance let drivers test their skills over challenging rocks and terrain. Adventure awaits on the trails as the higher top speed lets TRX-4M explore at a faster pace. STEERING ANGLE The full 45° steering angle gives TRX-4M an exceptionally tight turning radius and extreme maneuverability in small spaces where every millimeter counts. OIL-FILLED GTM SHOCKS The TRX-4M rejects the status quo of tiny, bouncy, imitation shocks and instead performs with the plush, long travel suspension feel from new GTM oil-filled shocks. Easy pre-load adjustment using the supplied spacers Double o-ring seals to prevent leaks Long travel for full suspension articulation DETAILED ABS BODY WITH CLIPLESS MOUNTING Innovative Traxxas clipless body mounting is a game-changer for ease of use and scale appearance. The body removes and installs in just seconds with no clips to lose or frustrating hook and loop tabs to wrestle with. Tough, highly detailed ABS bodies feature molded-in color with a deep glossy finish that wont chip or scrape off. Molded Scale Details: Spare tire carrier Fuel canisters and jack Rugged roof rack Snorkel Side mirrors Realistic grille Door handles WATERPROTECTED ELECTRONICS Wet grass, puddles, and streams that force all the others to turn around are no problem for reliable Traxxas waterprotected electronics. HEAVY-DUTY STEEL LADDER FRAME TRX-4M performs like a full-size crawler because its built like one. A rigid steel ladder frame virtually eliminates flex to put more power to the ground. The heavy-duty driveline soaks up the motors torque with ease, sending power to all four wheels through spool-equipped axles. TRAIL-READY CHASSIS AND DRIVELINE TRX-4M rides on a sophisticated four-link suspension with heavy-duty linkage front and rear. Beefy front and rear axles have excellent articulation to climb over the toughest obstacles. INNOVATIVE NEW ELECTRONICS The all-in-one ECM-2.5 (Electronic Control Module) incorporates all the features of an XL-5 speed control, TQ receiver, and Pro Scale® Lighting Control Module into one sleek waterproof package. The ECM-2.5 features low voltage detection for 2s LiPo batteries and EZ-Set® one-button programming to select from three realistic driving modes. Smooth, precise control and outstanding throttle response allow drivers to navigate confined spaces and conquer the toughest technical obstacles with ease. Waterprotected LVD (low voltage detection) Pro Scale LED functions EZ-Set button Powerful 6-volt BEC Select from one of three custom-tuned drive modes using the EZ-Set button: Sport Mode provides full forward and reverse speed with brakes and no automatic drag brake. Trail Mode is the default mode on the TRX-4M. It is like Sport Mode but adds smooth drag braking at neutral for control on steep descents. Crawl Mode applies full brakes the instant the throttle is released and allows drivers to continue through to reverse without a second push on the trigger. Crawl mode is perfect for that smooth scale look while creeping over technical terrain. Pro Scale® Lighting Functions: Easily add accessory brake lights, reverse lights, headlights, and more by simply installing the LED light kit and plugging it into the ECM-2.5. The lighting control functions are already built in. Titan 180-87T Reverse Rotation The big Titan 180 motor delivers rugged, dependable, go-anywhere power no 1/24 scale can match. It lays down the torque on the rocks and cranks up the speed on the trails for all-day driving fun. Low-speed torque for technical obstacles Fast speed to keep pace as you walk alongside Mounts securely with a fixed gear mesh that never needs adjustment Mounting position shifts the weight bias forward for improved crawling dynamics SOFT COMPOUND TIRES TRX-4Ms larger 1/18 size puts more rubber to the ground for exceptional off-road performance. Detailed wheels and tires are sized just right to carry TRX-4M up and over real-world obstacles with stunning scale appearance. The Defenders® Canyon Trail tires are scaled versions of standard TRX-4 rubber with aggressive lugs for dynamic traction. The Ford® Broncos® BFGoodrich® Mud Terrain T/A® KM3 tires are accurate down to the smallest detail with an authentic lug pattern and raised sidewall lettering. INCLUDED 2s LIPO BATTERY AND CHARGER WITH ID® TRX-4Ms 2-cell LiPo battery provides over an hour of runtime with Traxxas iD safety and simplicity. The specially-designed iD connector plugs directly into the ECM-2.5. 2s LiPo Battery with iD: Large 750mAh capacity provides over an hour of runtime 7.4 volts of LiPo power for exceptional performance Rugged, heavy gauge wiring for free-flowing power Keyed iD connector eliminates polarity errors 2-Amp USB LiPo Fast Charger: Traxxas iD technology delivers the perfect charge with no guesswork Universal USB-A plug for convenient charging almost anywhere High-output: up to 2-amp charge rate LED progress indicator TRX-4M Specs: Length: 262mm (Bronco) / 279mm (Defender) Front Track: 124mm Rear Track: 124mm Ground Clearance: 29mm Weight (w/o battery): 468g (Bronco) / 483g (Defender) Height: 117mm (Bronco) / 135mm (Defender) Wheelbase: 155mm Approach Angle: 54° (Bronco) / 52° (Defender) Breakover Angle: 45° (Bronco) / 45° (Defender) Departure Angle: 48° (Bronco) / 41° (Defender) Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Wheels (front and rear): 1.0 x 0.49 inches (25.4 x 12.5mm) Tires (front and rear): 2.2 x 1.0 inches (57 x 25.4mm) Electronic Control Module: ECM-2.5 (Combo ESC, Receiver, Lighting Control*) Motor (electric): Titan® 180 87T Differential Type: Fully Locked; 2:1 Axle Ratio Chassis Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic Hill Hold Drive System: Shaft-Driven 4WD Steering: Axle-Mounted Servo Radio System: TQ 2.4GHz 2-Channel Transmitter Servo: #2065T Heavy-Duty Waterproof Skill Level: 1 Battery Tray: L50.5 x W31mm *Requires accessory Pro Scale LED Light Kit, sold separately Whats In The Box: TRX-4M® Ready-To-Race® model Licensed ABS hard body Titan® 180 87-turn motor ECM-2.5 Electronic Control Module TQ transmitter 7.4 volt 750mAh 2-cell LiPo battery 2-amp USB fast charger with iD® High quality maintenance tools What Youll Need: AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

2.395,-

2.495,-

KJØP
-4%
Hovedbilde WLToys 124017 Buggy Fierce 1/12 4WD Børsteløs V2 Hovedbilde WLToys 124017 Buggy Fierce 1/12 4WD Børsteløs V2
WLToys 124017 Buggy Fierce 1/12 4WD Børsteløs V2
WLToys 124017 Buggy Fierce 1/12 4WD Børsteløs V2 Rask børsteløs Buggy som leveres komplett og har en toppfart på 65km/h! Bilen leveres med 4WD, et 2s 2200mah LiPo batteri og kraftig børsteløs motor som gir ekstrem akselerasjon og toppfart. Levereres helt komplett med unntak av 4stk AA-batterier til radio. 1/12-skala Bilen er 1/12-skala så den gir en god kombinasjon mellom størrelse og vekt. Drivaksler ut til hjulene er i metall og bilen har blant annet dempertårn og chassis i aluminium. Uavhengig hjuloppheng både foran og bak med kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Denne versjonen har også kjølevifte til ESC og kjøleribbe til motor påmontert. Batteri Bilen leveres med ett 2S 2200mAh LiPo-batteri med Deans-type kontakt. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AA-batterier, dette må kjøpes i tillegg. Lader er av USB-typen og kan lade batteriet på ca. 2,5 time. Ønsker man lader som kan brukes rett i støpsel eller på 12V, lader raskere og har kontroll på ladetid, spenning med mer så ligger det alternativ lader som tilbehør. Husk da også å kjøpe med deans-ladekabel.     Spesifikasjoner Lengde 356mm Bredde 208mm Høyde 110mm Motor 2845 4300KV Sender/Radio    Inkludert 2.4GHz Batteri 2s 2200mAh Lipo m/Deans Kjøretid 7-10min Ladetid Ca. 2.5t Rekkevidde 100m+ Skala 1/12 Vekt 1065g Eskens innhold 1x RC Buggy 1x Radio 2.4GHz 1x Batteri 1x Lader 1x Manual 1x Small cross sleeve  

1.995,-

KJØP
Hovedbilde Traxxas 9755 Driveshafts Center F&R Set TRX-4M
Traxxas 9755 Driveshafts Center F&R Set TRX-4M
Driveshafts Center F&R Set TRX-4M Driveshafts, center, assembled (front & rear) Front and rear center driveshafts come assembled and ready to install

149,-

169,-

KJØP
-12%
Hovedbilde WLToys 144001.1254.001 Gear Box Cover (Up And Down ...
WLToys 144001.1254.001 Gear Box Cover (Up And Down ...
WLToys 144001.1254.001 Gear Box Cover (Up And Down Cover)

49,-

KJØP
Hovedbilde WLToys 144001.1281.001 Bone
WLToys 144001.1281.001 Bone
Bone

69,-

KJØP
Hovedbilde Ghost Glider - Orange RTF Hovedbilde Ghost Glider - Orange RTF
Ghost Glider - Orange RTF
Inkludert batteri og lader Kan flys innendørs Lettflydd Liten og flott RC-modell. Hele flyet er så kompakt at det er godt egnet for innendørsflyging om du har en stor stue, kontorlokale e.l. Også en fin hageracer. En rimelig, enkel og morsom start på modellflykarrieren for jr, eller for din daglige avkobling på arbeidsplassen! Med kun 22cm vingespenn kan du fly på steder du ikke trodde var egnet for modellfly. Flyet behøver kun ca. 5 meter or å snu. Det er såpass lite og lett at det gjør lite skade på seg selv og omgivelsene ved sammenstøt, så her kan du utfordre deg selv. Fly utfordrende baner og se hva du kan få til!   Innhold Med i pakken følger flyet, ferdig montert og flyklart ut av esken. Flyets integrerte baatteri lades opp med medfølgende USB-lader. Det følger også med radiosender, denne drives av 3x AA btterier(ikke inkludert), og en bruksanvisning. Spesifikasjoner Vingespenn 22 cm Lengde 22.5 cm Høyde 7 cm Vekt 20 gram Flytid ca. 10 minutter Ladetid 25 minutter Frekvens 2.4Ghz Rekkevidde 20-50 meter Materiale MPP

399,-

KJØP
Hovedbilde Tamiya 85089 TS-89 Pearl Blue - 100ml
Tamiya 85089 TS-89 Pearl Blue - 100ml
The Tamiya TS-89 100ml Gloss Red Bull Racing Pearl Blue Acrylic Spray Paint is suitable to paint plastic model kits. The Tamiya Spray Paints are synthetic lacquers, which come in gloss, flat and translucent finishes. They are not affected by acrylic or enamel paints, meaning further detailing is possible

109,-

KJØP
Hovedbilde Traxxas 2530-GRAY Bulkhead Front Gray
Traxxas 2530-GRAY Bulkhead Front Gray
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

89,-

KJØP
-11%
Hovedbilde Kestrel DPRRC031 R/C EP Glider 157cm Balsa ARF (w/o ... Hovedbilde Kestrel DPRRC031 R/C EP Glider 157cm Balsa ARF (w/o ...
Kestrel DPRRC031 R/C EP Glider 157cm Balsa ARF (w/o ...
PRODUCT INFO: Kestrel is designed as a sailplane for thermal flying or as an electric powered glider for gentle flying sessions, makes an ideal trainer for beginners. Kit contains two molded cowlings for sailplane as well as EP version. Assembling kit is fairly straight forward. Follow step by step instructions for an enjoyable building experience. Features: Factory assembled and covered Lightweight balsa and ply construction High quality laser-cut parts Assembly instructions included Molded canopy & cowling included Suitable for electric flight or glider Easy to complete and fly In the box: 1x Pre-built & covered fuselage 1x Pre-built & covered 2-piece wing set 1x Pre-built & covered tailplane 1x Pre-built & covered fin 1x Hardware pack (horns, hinges etc.) 1x Wing band pack 1x Comprehensive step-by-step instruction manual Specs: Flying Weight: 750-800 g Length: 930mm Wingspan: 1570mm Completion Level: Kit Experience Level: Beginner Assembly Time: 2-3 Hours (depending on experience) Recommended Usage Environment: Designated R/C model flying site Colour: White, Red and Blue Material: Wood Additional Parts Required: 4 Channel Radio 2212-1000KV Brushless Motor 15/30Amp ESC 3S 1300mah Lipo 8x6 Folding Electric Prop 2x Mini Servo Glue

1.295,-

1.395,-

KJØP
-7%
Hovedbilde Yeah Racing YA-0557RD Aluminum Plate Servo Saver Red Hovedbilde Yeah Racing YA-0557RD Aluminum Plate Servo Saver Red
Yeah Racing YA-0557RD Aluminum Plate Servo Saver Red
Yeah Racing Aluminum Plate Servo Saver Red #YA-0557RD Servo saver to protect your servos! Comes with an aluminum plate to minimise the slop associated with servo savers to a minimum! Three rows of holes means they can be used in a large variety of cars.   Features: For: Futaba, KO and Sanwa Servo Material: Aluminum/Plastic   Includes: Servo Saver (1 pc) Screws (2 pcs) Locknuts (2 pcs) Sanwa, Ko Servo Saver Plate (1 pc) Futaba Servo Saver Plate (1 pc)

239,-

259,-

KJØP
-8%
Hovedbilde Hobbywing 30205150 SkyWalker 15A V2 ESC
Hobbywing 30205150 SkyWalker 15A V2 ESC
Hobbywing 30205150 SkyWalker 15A V2 ESC 2-3s 10g Kompakt Hobbywing Skywalker 15A V2 ESC. Perfekt regulator for små modeller og innendørsfly med 2-3S lipo. Dette er versjonen med 5V/2A BEC. Leveres med 2mm motorkontakter, kan programmeres med radio eller LED programboks. Krever batterikontakt. Spesifikasjoner Innspenning 2-3s LiPo BEC Output 5V@2A Kont/Peak 15A/30A Dimensjoner 38x17x5mm Vekt 10g

199,-

KJØP
Hovedbilde Tamiya 51530 TT-02 Motor Mount D Parts
Tamiya 51530 TT-02 Motor Mount D Parts
These are the D-parts to the TT-02 chassis platform. They contain the motor mount, gear cover and battery strap.   Feature: •For: Tamiya TT-02 •Material: Plastic •Color: Black Include: •Tamiya TT-02 Motor Mount D Parts (1 pc)

69,-

KJØP
Hovedbilde Ugears 70073 Dream Cabriolet VM-05 Hovedbilde Ugears 70073 Dream Cabriolet VM-05
Ugears 70073 Dream Cabriolet VM-05
UGEARS UG70073 - Dream Cabriolet VM-05 Car A Super-Detailed Wooden Car Kit of an 50's Classic! Looking back into the history of mechanics once again, Ugears couldn't miss such an important and interesting period, in a not-so-distant past, as the 50s. Rockabilly music, swing dresses, bobby socks and, of course, magnificent luxury cars and convertibles: feel a part of the time with our new ingenious work – The Dream Cabriolet VM-05. The 50s had given automobiles a completely new look, producing absolutely unique recognizable designs. The Dream Cabriolet VM-05 is a highly detailed and extremely realistic tribute of the Ugears’ designers and engineers to the automobile industry highlights of that decade. The model is traditionally equipped by a rubber-band motor that powers the mechanism and drives the car. The Cabriolet can go forward or back. To ensure you can take a close look at the beautiful eight-cylinder V configuration engine in operation, we introduced the idle mode. In this mode, your Cabriolet will stay still letting you look under the hood to appreciate the beauty of the moving gears. Should you want to put your vehicle in motion, pull the transmission lever on the steering column. Both front and rear wheels of the model are suspended to make its ride ultimately smooth. Use the steering wheel to move the front wheel coupling and send the Dream Cabriolet in the direction you choose. To make the design of this unique model even more realistic, Ugears engineers added a few important elements that make the automobile look extremely lifelike. We believe you will enjoy the window cranks and fully functional windshield wipers as well as a lifting jack and a repair toolkit mounted under the rear trunk. Another mechanical feature is the trunk and hood opening mechanisms that add some extra-vividness to this highly detailed vintage vehicle. Find your favorite retro radio station and your Dream Cabriolet will take you into the dreamlike 50s to share the best of what the decade has to offer. The Ugears Dream Cabriolet VM-05 model kit is made of sustainably sourced high grade wood and has everything you will need for assembly. The quality of the parts is top-notch: a laser method is used for cutting items from a plywood board that provides precise hairline cuts. The details have to be pulled out of the boards and assembled to create a complete convertible. Like all other Ugears models, the Cabriolet comes with step-by-step, full-color, truly easy to follow instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Russian, Japan, Italian, Chinese and Korean) and requires neither glue nor special tools to be fully assembled into functional self-propelled Cabriolet. Specs: Part Number: UG70073 EAN: 4820184120969 Number of components: 739 Estimated time of assembly: 13 hours Level: Advanced Recommended Building Age: 14+ Model for self-assembly without glue Model Size: 35 x 15.7 x 9 cm Package Size: 37.8 x 17 x 5 cm

999,-

1.099,-

KJØP
-9%
Hovedbilde Tamiya 35112 West German Leopard A4 1/35 Hovedbilde Tamiya 35112 West German Leopard A4 1/35
Tamiya 35112 West German Leopard A4 1/35
  The Leopard tank with a combat weight of 40 tons, main armament of a 105 mm gun and maximum road speed of 65km/h is rated as one of the strongest tanks in the world with excellent fire power, protection and mobility. As a main battle tank, it is being used in seven countires including West Germany, Holland, Italy and Belgium. MERKE TAMIYA PRODUKT Plastbyggesett SKALA 1:35 TYPE TANKS TEMA MILITÆRT

269,-

KJØP
Hovedbilde 1/48 F-35A LIGHTNING II – NORSK UTGAVE Hovedbilde 1/48 F-35A LIGHTNING II – NORSK UTGAVE
1/48 F-35A LIGHTNING II – NORSK UTGAVE
Tamiya F-35A Lightning II – Norsk Utgave 1/48 (61124) Tamiya F-35A Lightning II Norsk Utgave er et høykvalitets 1/48 skala byggesett som gjenskaper det toppmoderne jagerflyet som brukes av det norske luftforsvaret. Dette settet gir en autentisk og detaljert gjengivelse av F-35A med norske merkinger, perfekt for både modellbyggere og militærentusiaster. Synes du det Norske forsvarets nye F-35 Lightning er rått? Nå kan du selv bygge en fantastisk identisk skalamodell av A-varianten av Lockheed Martin F-35 Lightning II. F-35 – variant A for luftforsvaret, B for marinesoldatene og C for marinen – ble utviklet under Joint Strike Fighter Program (JSF), og blir sett på som en av femte generasjons jagerfly. Disse flyene har svært avanserte stealth-egenskaper, “network connectivity” samt overlegen situasjonsforståelse levert av en rekke integrerte sensorer. F-35 Lightning II ble først levert i 2015, og utplassering av over 3000 F-35 er planlagt rundt om i verden. F-35 har arvet Lightning-betegnelsen fra den berømte P-38, og vil lede verdensomspennende luftvåpen i mange år fremover. Lockheed Martin F-35A Lightning II plastbyggesett. Moderne femtegenerasjons kampfly, benyttet av Norge og andre NATO allierte. Norske decaler er med. Tamiya har en bred serie med maling. Du kan se hele sortimentet her: Maling Arkiver Bruk filteret til venstre på siden for å velge den serien du ønsker. AS & TS – Spraylakk for hardplast, tre og metaller. LP, X & XF – Beregnet på å males eller lakkeres med sprøyte eller pensel. Disse fargene er det referert til i manualen, for å få modellen til å se ut slik Tamiya har designet den. AS-26 TS-28 LP-14 LP-15 LP-34 LP-36 LP-59 LP-61 X-1 X-2 X-6 X-10 X-11 X-18 X-28 XF-1 XF-2 XF-3 XF-5 XF-7 XF-16 XF-22 XF-23 XF-25 XF-54 XF-56 XF-59 XF-60 XF-61 XF-62 XF-63 XF-85 Informasjon på engelsk: The remarkable new product “1/48 Lockheed Martin F-35A Lightning II”, announced at the 60th All Japan Model Hobby Show. The state-of-the-art stealth fighter is faithfully and precisely reproduced .     Tamiya Color paints for painting the 1/48 Lockheed Martin® F-35®A Lightning II®   Tamiya Color Spray Paint Tamiya Color Spray Paint TS-28 Olive drab 2 —   Tamiya Color Spray Paint for Aircraft Tamiya Color Spray Paint for Aircraft AS-26 Light ghost grey —   Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint LP-14 IJN gray (Maizuru Arsenal) LP-15 IJN gray (Yokosuka Arsenal) LP-29 Olive drab 2 LP-34 Light gray LP-36 Dark ghost gray LP-37 Light ghost gray LP-59 NATO brown LP-61 Metallic gray   Tamiya Color Tamiya Color Tamiya Color X-1 Black X-2 White X-6 Orange X-10 Gun metal X-11 Chrome silver X-18 Semi gloss black X-28 Park green XF-1 Flat black XF-2 Flat white XF-3 Flat yellow XF-5 Flat green XF-7 Flat red XF-16 Flat aluminum XF-22 RLM grey XF-23 Light blue XF-25 Light sea grey XF-54 Dark sea grey XF-59 Desert yellow XF-60 Dark yellow XF-61 Dark green XF-63 German grey XF-85 Rubber black

1.199,-

1.299,-

KJØP
-8%
Hovedbilde Tamiya 87034 Masking Tape Refill 10mm
Tamiya 87034 Masking Tape Refill 10mm
 This is a 10 Meter Roll of 10mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 10m           Width:  10mm

49,-

KJØP
Hovedbilde Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz
Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86004 PS-4 Polycarbonate Spray Blue 3 oz
Tamiya 86004 PS-4 Polycarbonate Spray Blue 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-4 Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.  

109,-

KJØP
Hovedbilde Tamiya 87063 Masking Tape 40mm Hovedbilde Tamiya 87063 Masking Tape 40mm
Tamiya 87063 Masking Tape 40mm
This is a Roll of 40mm Masking Tape from Tamiya. FEATURES This is a thin, self-adhesive paper tape, developed for model  applications.  Yellow in color.  Flexible.  Easily applied to curved surfaces making it ideal for masking off  areas for painting, etc. INCLUDES One Roll Of Masking Tape SPECIFICATIONS  Width: 40mm

65,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png