Hopp til innhold
-5%

Traxxas Servo 2080A Micro Sealed

Art.nr: TRX 2080A

349,-

369,-

- 5%
Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas Servo 2080A Micro Sealed

Servo, micro, waterproof.

 

Length: 29,5 mm
Height: 29 mm
Width: 14 mm
Max Voltage: 6,0 V
Speed at 6,0V: 0,11 sec/60°

HD-M9

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 2081
Copied
This is the Servo Case with Gaskets for the               Traxxas VXL Micro Waterproof Servo TRX 2081. FEATURES: Nylon construction           Blue in color INCLUDES: One Servo Case (Top, Middle, and Bottom Sections)           Five Gaskets           Instruction sheet REQUIRES: Installing remaining servo components

79,-

KJØP
Art.nr: TRX 2082X
Copied
Gear set, metal (for 2080X micro waterproof servo)

229,-

249,-

KJØP
-8%
Art.nr: HD-TR-5
Copied
TR-5 WP MG TRX 8.8kg / 0.06s Power HD servo spesialtilpasset som erstatningsservo for TRX-2080X. Flott og motstandsdyktig utførelse i aluminiums-hus. Servoen har metallgir og vannbestandig. 2 ulike servohorn medfølger og fastmontertkabel på 180mm.Kan passe flere 1/16-biler.   Spesifikasjoner: Kraft 4.8V: 3.8kg/cm Hastighet 4.8V:    0.11s Kraft 6.0V: 6.0kg/cm Hastighet 6.0V: 0.09s Kraft 7.4V: 8.0kg/cm Hastighet 7.4V: 0.07s Kraft 8.4V: 8.8kg/cm Hastighet 8.4V: 0.06s Vekt: 35g Gir: Metal Størrelse: 29.5 x 14 x 31.4mm Servohorn 25T Futaba Style

649,-

699,-

KJØP
-7%
Art.nr: HD-M9
Copied
Power-HD HD-M9 Digital Servo 9kg/0.07s   Kraftig digitalservo fra Power HD med gir i kobber og aluminium. Har børsteløs motor for høy ytelse og presisjon. Leveres i flott boks med festeskruer og flere horn.   Spesifikasjoner: Kraft 6.0V: 7kg/cm Hastighet 6.0V:    0.08s Kraft 7.4V: 9kg/cm Hastighet 7.4V: 0.07s Vekt: 35g Gir: Kobber & Alu Størrelse: 35 x 15.1 x 29.5mm Servohorn 25T Futaba Style

895,-

KJØP
Art.nr: TRX 2082A
Copied
Traxxas 2082A Gear Set for Servo 2080A

59,-

KJØP
Art.nr: SW-0250MG PLUS
Copied
SAVÖX SW-0250MG-PLUS - Water Proof Metal-Geared Mini Servo The SW-0250MG-PLUS is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Ideal for cars and boats subject to water or snow Ideal for Traxxas 1/16 vehicles Specifications: Torque @4.8V: 3.5kg/cm Torque @6V: 5kg/cm Speed @4.8V: 0.14 sec/60 deg Speed @6V: 0.11 sec/60 deg Dimensions L x W x H: 29.5 x 14.0 x 32.5mm Weight: 25g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 80mA @4.8V, 100mA @6.0V Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 21 Tooth Bearings: 1BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

495,-

KJØP

Kunder kjøpte også

Traxxas 2082A Gear Set for Servo 2080A

59,-

KJØP
Fin oppgraderingsregulator for din børsteløse RTR båt. Selvfølgelig 100% vanntett, og for 2-3S lipo. Kan programmeres med LED programkort eller med radio. Leveres uten kontakter. -Vanntett -LiPo kompatibel (2-3S) -Bryter -Programmerbar timing -God vannkjøling -Beskyttelse mot overoppheting, spenningsvern etc

799,-

849,-

KJØP
-6%
            This is the Small Rod End Set for the Traxxas Revo. FEATURES: Plastic construction           Black in color           Metal Pivot Balls INCLUDES: Six Rod Ends           Six Pivot Balls REQUIRES: Assembly to vehicle SPECS:    Length:               18mm (.71")           Width at ball joint: 9.5mm (.38")

49,-

KJØP
Traxxas 2821-PORT - iD® Charging Port for TRX-4M® Batteries For use with EZ-Peak® iD Chargers - Cut Charging Time in Half! Charge 2821 batteries up to 2X faster than the TRX-4M included charger Access all the features of EZ-Peak iD Chargers including storage charge Allows compatibility with all EZ-Peak iD multi-chemistry chargers Check cell voltage and monitor charging in real-time with EZ-Peak Live chargers and the EZ-Peak Live app Full-Featured iD Charging Convenience for TRX-4M Introduce TRX-4M owners to the world of EZ-Peak charging convenience. 2-amp charging port designed for the TRX-4M 2821 750mAh LiPo battery Charge up to twice as fast as the stock TRX-4M USB charger with the advanced circuitry of the EZ-Peak lineup Access Balance, Fast, or Storage modes Check cell voltage with EZ-Peak Live and EZ-Peak Live Dual and the EZ-Peak Live mobile app Easily connects the TRX-4M battery to EZ-Peak chargers with iD iD convenience and EZ-Peak features for TRX-4M owners *Cell voltage check and charge monitoring require EZ-Peak Live or EZ-Peak Live Dual charger and the EZ-Peak Live app.

139,-

149,-

KJØP
-7%
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)

89,-

KJØP
This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 1400mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S2P  Continuous Discharge: 25C (35A)  Max Burst Rate: 50C (70A)  Watt Hours: 15.54  Charge Rate: 1C (1.4A)  Max Charge Rate: 2C (2.8A)  Dimensions: 3.5 x 0.83 x 1.2" (89 x 21 x 30mm)  Weight: 4.2oz (118g)

469,-

489,-

KJØP
-4%
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Wheelie Bar           One 2,5x14mm Cap Head Screws           Three 2,5x8mm Cap Head Screws           Instruction Sheet REQUIRES: Installation at rear of chassis

199,-

KJØP
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
These are the Left and Right Axle Carriers for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Left Axle Carrier           One Right Axle Carrier REQUIRES: Installation on the vehicle

79,-

KJØP
These are the Wheel Hubs and Axle Pins for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Four Wheel Hubs           Four 1.5x8mm Axle Pins REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm

39,-

KJØP
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

Ikke på lager
-9%
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
This is the Battery Compartment Door and Vents for use on                 the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Battery Compartment Door           Two Vents REQUIRES: Installation on the vehicle

59,-

KJØP
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase extension to 1/16 E-Revo in just minutes! Lengthening the wheelbase of your 1/16 E-Revo allows you to accelerate hard through the roughest track sections with increased stability and confidence. The longer wheelbase also helps keep the 1/16 E-Revo planted for holeshot launches and hold full-on power through the turns. Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the extended rear arms allow the wheelbase to be quickly tuned for various track conditions.

99,-

KJØP
WLToys Buggy RSR i 1/14-skala i grønn utgave med 4WD. Meget rask bil med mye bruk av solide aluminiumsdeler. Leveres komplett med oppladbart LiPo-batteri og 2.4GHz rattradio. Bilen er 31cm lang og har en toppfart opp mot 50km/h. Det følger med lader så det eneste som trengs i tillegg her er 4stk AA-batterier til radioen. 1/14-skala Bilen er 1/14-skala så den gir en god kombinasjon mellom størrelse og vekt. Drivaksler ut til hjulene er i metall og bilen har blant annet dempertårn og chassis i aluminium. Uavhengig hjuloppheng både foran og bak med kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Batteri Bilen leveres med ett 2S 1500mAh LiPo-batteri med Deans-type kontakt. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AA-batterier, dette må kjøpes i tillegg.   Spesifikasjoner Lengde 310mm Bredde 205mm Høyde 110mm Motor 550 Sender/Radio Inkludert 2.4G Batteri 2S LiPo 1500mAh Dean/T-Type Kjøretid ca 7 minutter Ladetid ca 2 timer Rekkevidde 100m+ Skala 1/14

1.495,-

1.595,-

KJØP
-6%
This is the Front Bumper and Mount for the Traxxas 1/16 scale Rally VXL. FEATURES: Black plastic construction INCLUDES: 1 Mount and 1 Bumper REQUIRES: Installation onto the 1/16 Rally chassis

89,-

99,-

KJØP
-10%
These are the Front and Rear Body Mounts and Posts for use on the                     Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Body Mount           One Rear Body Mount           Two Front Body Posts           Two Rear Body Posts REQUIRES: Installation on the vehicle

79,-

KJØP
Yeah Racing Waterproof Micro Servo For Traxxas TRX-4 TRX-6 #YE-0030 Description: Upgrade micro servo for diff locking and gear changing on Traxxas's line of scale crawlers! Features full metal gears for utmost durability and reliability on the trail! Being waterproof means you can take this servo anywhere on the trail and not worry about it failing! Long wires and servo horns included if you want to use this servo in other applications as well! Material: Plastic Case/Metal Gears Color: Blue Feature: For: Traxxas TRX-4 TRX-6 And every TRX-4M models Specification: Torque (4.8V): 1.8kg-cm Torque (6.0V): 2.2kg-cm Torque (7.4V): 2.6kg-cm Speed: 0.15s (4.8V), 0.12s (6.0V), 0.10s (7.4V) Operating Voltage:4.8-7.4V Weight: 16.0g Servo Spline: 25t Gear Type:Copper & Aluminum Size:22.5×12.5×24.0mm Include: Waterproof Micro Servo (1 pc) Servo Horns (2 pcs) Erstatter TRX 2065, 2065X, 2065A, 2065R, 2065T

299,-

329,-

KJØP
-9%
1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!   

169,-

KJØP
Features     Hitec 57351S Y-Harness 6"     Allows modeler to plug two servos into one receiver channel Specifications     Length: 6" (152mm) overall 2" (51mm) each Y portion Contents     One 6" Long Y-Harness with One Male Plug and Two Female Plugs Requirements     Installation Comments     Wire color code: Hitec-                            Black: negative                            Red: positive                            Yellow: signal  

85,-

KJØP
Traxxas 1522 Motor Heat Sink

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png