Hopp til innhold
Hjem / Batteri & lader / Diverse / Adapter for traxxas seriekabel
-34%

Adapter for traxxas seriekabel

Art.nr:

99,-

149,-

- 34%

Diverse
På lager: 17

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas seriekabel for å seriekoble 2 stk batteripakker.
NB! NB! Kan kun brukes med 2 stk nimh batteripakker på Traxxas sine 1/16 biler. 
Altså du kan ikke seriekoble 2 stk lipo da regulatoren er kun laget for max 3 celler.
Og husk å skifte til det lille tannhjulet som fulgte med bilen når den var ny.
Hvis dette ikke følges vil du brenne motoren eller regulatoren.

Produsent

Diverse

Relaterte produkter

 

Hovedbilde Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Blue - USB ... Hovedbilde Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Blue - USB ...
Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Blue - USB ...
Art.nr: TRX 71076-8-BLUEX
Copied
Traxxas 71076-8-BLUE- E-Revo 1/16 VXL with USB-C charger & NiMH battery 1/16 E-Revo® VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. FEATURES ON 1/16 E-REVO VXL (71076-8) Traxxas Stability Management (TSM)® 7.2 volt Traxxas Power Cell NiMH battery with iD® 2-amp USB-C fast charger TQi™ 2.4 GHz transmitter and receiver 48+ kph with included NiMH battery 80+ kph with additional NiMH battery* Rocker-actuated suspension for superior handling and control Full-time 4WD Velineon® 380 brushless motor Waterproof electronics Torque-Control™ slipper clutch Sealed differentials All-terrain tires with foam inserts Class-Leading Speed Some mini-models are "fast for a mini." That's not good enough for Traxxas. The 1/16 E-Revo VXL is just plain fast. At 30+ mph with the included 6-cell NiMH battery, E-Revo VXL is faster than most mini models and even 1/10 scale electric RTR trucks. Install a second 6-cell battery to unleash the Velineon Brushless Power System's full fury, and E-Revo VXL jumps to over 50 mph. Velineon Brushless Power Built specifically for Traxxas 1/16 scale models, the VXL-3m™ speed control and Velineon® 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2s and 3s packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed! Battery and USB-C Charger Included! 1/16 E-Revo includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD® technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time. 1/16th E-REVO BRUSHLESS VXL (71076-8) SPECS: Length: 328 mm Width: 239 mm Weight: 1.09 kg Height (overall): 117 mm Wheelbase: 202 mm Front Shock Length: 48 mm Rear Shock Length: 48 mm Front Tires (pre-glued): Talon™ 2.0" Rear Tires (pre-glued): Talon™ 2.0" Front Wheels: 2.0" Gemini (black-chrome) Rear Wheels: 2.0" Gemini (black-chrome) Electronic Speed Control: Waterproof Velineon® VXL-3m™ Motor (electric): Velineon 380 brushless Transmission: Heavy duty single speed Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1) Overall Drive Ratio: 9.00 (stock, out-of-box) Differential Type: Sealed, hardened steel bevel Gear Pitch: 48 pitch Chassis Structure/Material: Molded composite Nylon monocoque Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi™ 2.4 GHz w/TSM® Top Speed: 48+ kph (80+ kph with dual batteries)* Skill Level: 2 Included Batteries: 6-cell NiMH with iD® Included Charger: 2-amp USB-C fast charger Required Batteries: 4 "AA" (transmitter) Traxxas 2080 Servo

4.595,-

4.995,-

På lager 1
KJØP
-8%
Hovedbilde Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Purple - USB ... Hovedbilde Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Purple - USB ...
Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Purple - USB ...
Art.nr: TRX 71076-8-PRPL
Copied
Traxxas 71076-8-PRPL - E-Revo 1/16 VXL with USB-C charger & NiMH battery 1/16 E-Revo® VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. FEATURES ON 1/16 E-REVO VXL (71076-8) Traxxas Stability Management (TSM)® 7.2 volt Traxxas Power Cell NiMH battery with iD® 2-amp USB-C fast charger TQi™ 2.4 GHz transmitter and receiver 48+ kph with included NiMH battery 80+ kph with additional NiMH battery* Rocker-actuated suspension for superior handling and control Full-time 4WD Velineon® 380 brushless motor Waterproof electronics Torque-Control™ slipper clutch Sealed differentials All-terrain tires with foam inserts Class-Leading Speed Some mini-models are "fast for a mini." That's not good enough for Traxxas. The 1/16 E-Revo VXL is just plain fast. At 30+ mph with the included 6-cell NiMH battery, E-Revo VXL is faster than most mini models and even 1/10 scale electric RTR trucks. Install a second 6-cell battery to unleash the Velineon Brushless Power System's full fury, and E-Revo VXL jumps to over 50 mph. Velineon Brushless Power Built specifically for Traxxas 1/16 scale models, the VXL-3m™ speed control and Velineon® 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2s and 3s packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed! Battery and USB-C Charger Included! 1/16 E-Revo includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD® technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time. 1/16th E-REVO BRUSHLESS VXL (71076-8-PRPL) SPECS: Length: 328 mm Width: 239 mm Weight: 1.09 kg Height (overall): 117 mm Wheelbase: 202 mm Front Shock Length: 48 mm Rear Shock Length: 48 mm Front Tires (pre-glued): Talon™ 2.0" Rear Tires (pre-glued): Talon™ 2.0" Front Wheels: 2.0" Gemini (black-chrome) Rear Wheels: 2.0" Gemini (black-chrome) Electronic Speed Control: Waterproof Velineon® VXL-3m™ Motor (electric): Velineon 380 brushless Transmission: Heavy duty single speed Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1) Overall Drive Ratio: 9.00 (stock, out-of-box) Differential Type: Sealed, hardened steel bevel Gear Pitch: 48 pitch Chassis Structure/Material: Molded composite Nylon monocoque Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi™ 2.4 GHz w/TSM® Top Speed: 48+ kph (80+ kph with dual batteries)* Skill Level: 2 Included Batteries: 6-cell NiMH with iD® Included Charger: 2-amp USB-C fast charger Required Batteries: 4 "AA" (transmitter) Traxxas 2080 Servo

4.595,-

4.995,-

På lager 1
KJØP
-8%

Kunder kjøpte også

Hovedbilde Traxxas 1834A Body Clips Standard Black (12)
Traxxas 1834A Body Clips Standard Black (12)
Body Clips Standard Black (12)

29,-

39,-

På lager 5
KJØP
-26%
Hovedbilde Traxxas 2734 Cable Ties Small (10)
Traxxas 2734 Cable Ties Small (10)
This is a package of cable ties.     FEATURES Easily holds wires in place & other small items INCLUDES 10 Black cable ties SPECIFICATIONS 3 1/16" long (76mm)  3/32" wide (2.5mm)

25,-

På lager 1
KJØP
Hovedbilde Traxxas 4915 Foam Body Washers T-Maxx (10)
Traxxas 4915 Foam Body Washers T-Maxx (10)
       These are Foam Body Washers for the Traxxas T-Maxx                       4WD Radio Control Monster Truck.       These body washers adhere to the inside of the body over the body               mount holes and cushions the body from vibration. FEATURES: Replaces damaged or missing body washers.           Adhesive on one side allows easy attachment to body.           Made of shock absorbing foam that helps to prevent splitting of body             at mounting holes. INCLUDES: Ten foam body washers for the Traxxas T-Maxx. REQUIRES: Peeling off paper backing and attaching at mounting holes on body. SPECS:    Outer Diameter: 5/8" (16mm)           Inner Diameter: 1/4" (7mm) COMMENTS: May be used on any lexan car body.

25,-

På lager 4
KJØP
Hovedbilde Traxxas 2577 Button Head Screw 3x10mm Revo (6)
Traxxas 2577 Button Head Screw 3x10mm Revo (6)
This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction           Black in Color           Button Head Type           Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

På lager 3
KJØP
Hovedbilde Traxxas 7154 Wheel Hubs Hex/Axle Pins VXL (4)
Traxxas 7154 Wheel Hubs Hex/Axle Pins VXL (4)
These are the Wheel Hubs and Axle Pins for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Four Wheel Hubs           Four 1.5x8mm Axle Pins REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm

39,-

På lager 6
KJØP
Hovedbilde Traxxas 7028X Hollow Balls Steel Machined
Traxxas 7028X Hollow Balls Steel Machined
These are the Machined Steel Hollow Balls from Traxxas. FEATURES: Steel construction           Silver in color INCLUDES: Twenty Two Hollow Balls SPECS:    Length: 5mm (0.20")           Outer Diameter: 4.5mm (0.18")           Inner Diameter: 2.5mm (0.1")  

99,-

På lager 1
KJØP
Hovedbilde Traxxas 7132R Extended Wheelbase Rear Suspension Arm ... Hovedbilde Traxxas 7132R Extended Wheelbase Rear Suspension Arm ...
Traxxas 7132R Extended Wheelbase Rear Suspension Arm ...
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase extension to 1/16 E-Revo in just minutes! Lengthening the wheelbase of your 1/16 E-Revo allows you to accelerate hard through the roughest track sections with increased stability and confidence. The longer wheelbase also helps keep the 1/16 E-Revo planted for holeshot launches and hold full-on power through the turns. Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the extended rear arms allow the wheelbase to be quickly tuned for various track conditions.

99,-

På lager 1
KJØP
Hovedbilde Traxxas 2842X Battery Li-Po 2S 7,4V 5000mAh 25C ...
Traxxas 2842X Battery Li-Po 2S 7,4V 5000mAh 25C ...
Traxxas 5000mAh 7.4v 2-Cell 25C Short LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 7.4 V (2S) C Rating: 25 Length: 137 mm Height: 24 mm Width: 43 mm Weight: 280 g

649,-

749,-

På lager 11
KJØP
-13%
Hovedbilde Traxxas 6828X Heavy Duty Diff Output Yokes 4X4 (2)
Traxxas 6828X Heavy Duty Diff Output Yokes 4X4 (2)
These are the Heavy Dyty Differential Output Yokes for the                          Slash 4x4 from Traxxas FEATURES: Black plastic construction INCLUDES: 2 Ouput yokes           2 screw pins REQUIRES: Installation on vehicle

55,-

På lager 4
KJØP
Hovedbilde Traxxas 2820X LiPo 2S 7.4V 2200mAh 25C w/iD Connector
Traxxas 2820X LiPo 2S 7.4V 2200mAh 25C w/iD Connector
NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon.   This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High  Current Connector and Integrated Balance Connector   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 2S2P  Continuous Discharge: 25C (55A)  Max Burst Rate: 50C (110A)  Watt Hours: 16.28  Charge Rate: 1C (2.2A)  Max Charge Rate: 2C (4.4A)  Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm)  Weight: 4.2oz (118g)

549,-

569,-

På lager 2
KJØP
-4%
Hovedbilde Traxxas 2532 Fiberglass Tie Bar Hovedbilde Traxxas 2532 Fiberglass Tie Bar
Traxxas 2532 Fiberglass Tie Bar
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
Ikke på lager
-17%
Hovedbilde Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

På lager 3
KJØP
-26%
Hovedbilde Traxxas 1985 Fiber Washers 5x8mm (20)
Traxxas 1985 Fiber Washers 5x8mm (20)
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

På lager 3
KJØP
Hovedbilde Traxxas 4683 Spur Gear 48P 83T
Traxxas 4683 Spur Gear 48P 83T
This is a 48P, 83T Spur Gear for models with                   Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           83 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   83

39,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 4859 Flathead screw M3x10
Traxxas 4859 Flathead screw M3x10
Screws, 3x10mm flat-head machine (hex drive) (4)

25,-

På lager 2
KJØP
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Ikke på lager
Hovedbilde Castle Creations Crawler 4-Pole Sensored BL Slate ... Hovedbilde Castle Creations Crawler 4-Pole Sensored BL Slate ...
Castle Creations Crawler 4-Pole Sensored BL Slate ...
This is the Castle Creations 1406-2280Kv Brushless Sensored Motor.       FEATURES Ideal for 1/10 scale rock crawlers, trail rigs, touring cars, stadium  trucks and buggies powered by 2-4S LiPo batteries with appropriate  gearing  ROAR standard sensor port and labeled connections  SMARTSENSE uses sensors to provide smooth starts, excellent torque  and low speed driveability  CNC machined 6061-T6 aluminum can, slate gray in color  High performance 0.2mm steel lamination stacked stator  High strength 180°C grade neodymium sintered magnets with Kevlar wrap  Oversize NMB grade ball bearings  Rebuildable     INCLUDES 1406-2280Kv Brushless Sensored Motor with Sensor Wire  Three 4mm Female Castle Bullet Connectors     REQUIREMENTS ESC such as the Castle Creations Mamba Max Pro, Mamba X and Mamba  Micro X     SPECIFICATIONS  Input Voltage Range: 2-4S LiPo  Kv Rating: 2280  Max RPM: 100.000  Can Length: 1.9" (49.5mm)  Can Diameter: 1.4" (36mm)  Weight: 6.9oz (197g) with wires  Shaft Diameter: 1/8" (3.17mm)  Shaft Length: 0.59" (15mm)  Mounting Hole Specifications: M3 @ 25mm  Wire Lead: Castle 13 AWG silicone insulated wire  Connectors: 4mm male Castle Bullet Connectors

1.395,-

1.495,-

På lager 3
KJØP
-7%
Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These  are the pillars of the Mamba X design and the driving forces behind the feature-packed controller.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 6S Sensored Capable: Yes The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle’s new and improved throttle response keeps you ahead of the competition. The Mamba X is proudly designed and manufactured in Olathe, Kansas and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Features: Wide 2S to 6S input voltage range Sensored Motor Support Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-connectors. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1512-2650Kv (P/N: 060-0061-00) motor, with appropriate gearing only.  

2.595,-

2.895,-

På lager 1
KJØP
-10%
Hovedbilde Traxxas 1647 Silicon Grease
Traxxas 1647 Silicon Grease
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 6538 Telemetry Trigger Magnet Holders/Spur ...
Traxxas 6538 Telemetry Trigger Magnet Holders/Spur ...
These are the Traxxas Telemetry Trigger Magnet Holders,                        Spur Gear/Telemetry Trigger Magnet FEATURES: Black plastic and metal construction INCLUDES: Two different plasting holders           One disk-shaped magnet           Three 8mm screws           Three 10mm screws SPECS:    Magnet diameter: 5mm           Magnet thickness: 2mm

35,-

Ikke på lager
Ikke på lager
Hovedbilde Front Porch 16014 Treasures® Pre-Cut Foam Mounting ...
Front Porch 16014 Treasures® Pre-Cut Foam Mounting ...
Front Porch Treasures® Pre-Cut Foam Mounting Tape is ideal for scrapbooking! Perfect for adding depth and dimension to make your cards, posters, scrapbooks, invitations and other art projects really POP! This roll contains 10ft of permanent, double-sided pre-cut tape. Pre-Cut Foam Mounting Tape is 100% Acid and Lignin Free! One Roll, 19mmx3.04m   Works best on: 3-Dimensional Projects Cards Die Cuts Invitations Photos Rubber Stamping Scrapbooking Shaker Boxes Stickers

59,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Hovedbilde Traxxas 7426 Battery Hold-Down Front/Rear 1/10
Traxxas 7426 Battery Hold-Down Front/Rear 1/10
This is the Battery Hold-Down Front/Rear                         For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic INCLUDES: Three different pieces COMMENTS: This battery holder is a replacement part.

89,-

99,-

På lager 2
KJØP
-10%
Hovedbilde MIP 18150 Front X-Duty CVD Kit Slash/4x4
MIP 18150 Front X-Duty CVD Kit Slash/4x4
NB! NB! Husk å bruke locktight(skruelim) på skruene her!!! #18150 / 10132 - MIP  X-Duty™, CVD™ Drive Kit Traxxas, 1/10 Scale Front 4WD  Slash/ Stampede/ Rustler Advantages:  Unique and Strong splined steel construction. Designed for ultimate durability for those overpowered vehicles Fully rebuildable so any damaged or worn part can be replaced. (scroll down on main part # and all rebuild components are there) Pro Tips:  Use MIP Grease and MIP Blue Thread Gel upon assembly.  Be sure to keep joints lubed to enjoy long part life   Features: Made From High Grade Carbon Steel Keyed 12mm Hex Standard  Heat Treated steel components to help increase strength and part life. Black Oxide coated to protect the components from premature rust.  100% Designed / Manufactured / Packaged in the USA!!! Includes:    Complete center MIP HD Driveline™  Special Note: This 18150 / 10132 kit features a tweener bone and updated hubs unlike that seen in past kits so it makes it unique that it can fit most if not all of popular 1/10 scale 4x4 Traxxas vehicles that feature the same hubs and arm lengths including the 4wd Slash, Stampede, Rustler, and Rally versions. This kit replaces that of #11110 kits.    This kit replaces that of MIP #11110     MIP X-Duty™ parts are rated for max 4S Lipos.     World Class Products, Precision Tools, Race Proven Performance, Thats MIP!   Whats included: - 2 - MIP Confetti Sticker, 2.185 x .65 Black - 1 - MIP Lube & Thread Gel Cup - 1 - MIP Thread Gel Safety Sheet - 1 - MIP Inst. Sheet, X-Duty Front, Traxxas 4x4's - 1 - Support Parts Insert Sheet, Extra Kit Parts - 1 - SHSS, 8-32 x 1/8" Flat Point - 1 - 3/32 x 5/8" Cross Pin - 1 - 1/4" x 3/8" Coupling - 2 - Nut, M4 x .7mm Steel Locknut - 4 - SHSS, 8-32 x 1/8" Flat Point - 4 - 3/32 x 5/8" Cross Pin - 4 - 1/4" x 3/8" Coupling - 2 - MIP Bearing Spacer, Rear, Traxxas Slash/ Slash 4x4 - 4 - MIP M4 Pin Screw, Slash Diff Outdrive - 2 - MIP X-Duty Hex Adapter, Traxxas Slash, Rust, Stamp - 2 - SHSS, M3 x 4mm Flat Point - 2 - MIP X-Duty, Male Spline Bone, 54mm - 2 - MIP X-Duty, Drive Hub, 16mm w/ 5mm Bore - 2 - Female Bone, CVD, C-Drive, Scorpion, Axial - 2 - MIP X-Duty Axle, Slash 4x4 Front      

899,-

949,-

Ikke på lager
Ikke på lager
-5%
Hovedbilde MIP 18140 Rear X-Duty CVD Kit Slash/4x4
MIP 18140 Rear X-Duty CVD Kit Slash/4x4
NB! NB! Husk å bruke locktight(skruelim) på skruene her!!! #18140 / 10130 - MIP  X-Duty, CVD Drive Kit Traxxas, 1/10 Scale REAR 2WD/ 4WD Slash/ Stampede/ Rustler Advantages:  Unique and Strong splined steel construction. Designed for ultimate durability for those overpowered vehicles Fully rebuildable so any damaged or worn part can be replaced. (scroll down on main part # and all rebuild components are there) Pro Tips:  Use MIP Grease and MIP Blue Thread Gel upon assembly.  Be sure to keep joints lubed to enjoy long part life   Features: Made From High Grade Carbon Steel Keyed 12mm Hex Standard  Heat Treated steel components to help increase strength and part life. Black Oxide coated to protect the components from premature rust.  100% Designed / Manufactured / Packaged in the USA!!! Includes:  Complete rear Xduty Driveline Special Note:   This 18140 /10130 kit features a tweener bone and updated hubs unlike that seen in past kits so it makes it unique that it can fit most if not all of popular 1/10 scale 2wd and 4x4 Traxxas vehicles that feature the same hubs and arm lengths including the 2wd and 4wd Slash, Stampede, Rustler, Rally, and Monster Truck both in Electric/Nitro compatible version.    This kit replaces that of MIP #11104, #11106, & #11109  MIP X-Duty™ parts are rated for max 4S Lipos.   World Class Products, Precision Tools, Race Proven Performance, Thats MIP! Whats inclueded: 2 - MIP Confetti Sticker, 2.185 x .65 Black 1 - MIP Lube & Thread Gel Cup 1 - MIP Thread Gel Safety Sheet 1 - MIP Inst. Sheet, X-Duty Rear, Traxxas 4x4's 1 - Support Parts Insert Sheet, Extra Kit Parts 1 - SHSS, 8-32 x 1/8" Flat Point 1 - 3/32 x 5/8" Cross Pin 1 - 1/4" x 3/8" Coupling 2 - Nut, M4 x .7mm Steel Locknut 4 - SHSS, 8-32 x 1/8" Flat Point 4 - 3/32 x 5/8" Cross Pin 4 - 1/4" x 3/8" Coupling 2 - MIP Bearing Spacer Front, HPI Blitz 4 - MIP Bearing Spacer, Rear, Traxxas Slash/ Slash 4x4 4 - MIP M4 Pin Screw, Slash Diff Outdrive 2 - MIP X-Duty Hex Adapter, Traxxas Slash, Rust, Stamp 2 - SHSS, M3 x 4mm Flat Point 2 - MIP X-Duty, Male Spline Bone, 54mm 2 - MIP X-Duty, Drive Hub, 16mm w/ 5mm Bore 2 - Female Bone, CVD, C-Drive, Scorpion, Axial 2 - MIP X-Duty Axle, Slash 4x4 Rear

899,-

949,-

Ikke på lager
Ikke på lager
-5%
Hovedbilde Traxxas 4611 Ball Bearings 5x11x4mm (2)
Traxxas 4611 Ball Bearings 5x11x4mm (2)
These are 5 x 11 x 4mm Ball Bearings from Traxxas.     FEATURES Ball bearings reduce friction and last longer than bushings.  Chrome steel construction.  Used to upgrade from bushings.   INCLUDES Two 5 x 11mm bearings   SPECIFICATIONS  Inner Diameter: 5mm  Outer Diameter: 11mm  Thickness: 4mm

79,-

På lager 3
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png