Hopp til innhold

Traxxas 5124 Bearing Rubber Shield Blue 4x7x2.5mm Jato (2)

Art.nr: TRX 5124

55,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are a pair of 4x7mm Rubber Sheilded Bearings
               from Traxxas.

FEATURES: Rubber shielded
          Steel construction


INCLUDES: Two rubber shielded bearings


REQUIRES: Nothing


SPECS:    Thickness: 2.6mm
          Inner Diameter: 4mm
          Outer Diameter: 7mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .69" (17.5mm)

39,-

49,-

KJØP
-20%
This is the Rear Suspension Arm Set for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR FEATURES: Nylon construction           Black in color INCLUDES: One Lower Right Suspension Arm           One Lower Left Suspension Arm           Two Rear Lower Left/Right Suspension Arms

99,-

KJØP
Yeah Racing Aluminum M3 Flat Washer 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm 10pcs Set Orange #YA-0390OR Description: This is Yeah Racing Aluminum M3 Flat Washer 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm 10pcs. It is made of high quality aluminum and enabling better fastening while spreading the load of a screw.   Feature:   For: Miscellaneous Material: Aluminum Color: Orange Thickness: 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm respectively   Include:   M3 Flat Washer 0.25mm (10 pcs) M3 Flat Washer 0.5mm (10 pcs) M3 Flat Washer 1mm (10 pcs) M3 Flat Washer 1.5mm (10 pcs) M3 Flat Washer 2mm (10 pcs) M3 Flat Washer 2.5mm (10 pcs) M3 Flat Washer 3mm (10 pcs)   Yeah Racing Aluminum M3 Flat Washer 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm 10pcs Set Orange Description: This is Yeah Racing Aluminum M3 Flat Washer 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm 10pcs. It is made of high quality aluminum and enabling better fastening while spreading the load of a screw. Feature: For: Miscellaneous Material: Aluminum Color: Orange Thickness: 0.25 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3mm respectively Include: M3 Flat Washer 0.25mm (10 pcs) M3 Flat Washer 0.5mm (10 pcs) M3 Flat Washer 1mm (10 pcs) M3 Flat Washer 1.5mm (10 pcs) M3 Flat Washer 2mm (10 pcs) M3 Flat Washer 2.5mm (10 pcs) M3 Flat Washer 3mm (10 pcs)

239,-

KJØP
Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
This is a Traxxas Power Tap Connector, and is intended for use with Traxxas vehicles equipped with the Traxxas Telemetry system (Traxxas TQi Radio System with Docking Base). The Power Tap Connector attaches to your electric vehicle's speed control, allowing you to monitor battery voltage as you drive. Needed to Complete: TRA6521 temperature sensor (long) or TRA6523 temperature sensor (short) is required to connect the power tap connector. Note: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with the Traxxas Link App installed. Most Traxxas kits require additional components to install the telemetry system. Refer to your instruction manual for details.

69,-

KJØP
The Temperature Sensor installs on the motor or engine to measure its temperature For the Traxxas TQi Telemetry System.

139,-

Ikke på lager
These are the Aluminum Hex Wheel Hubs from Traxxas. FEATURES: Aluminun construction           Blue in color INCLUDES: Four Hex Wheel Hubs REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm           Thickness: 4.2mm (0.17")  

219,-

KJØP
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
RPM Front A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7131 Quick Notes: Replaces stock Traxxas #7131 Matching Rear A-arms are available Matching Axle Carriers are available Upon the release of the Traxxas 1/16th E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A significant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.   RPM front A-arms for the Traxxas 1/16 E-Revo are sold in sets of four – both upper and both lower a-arms

179,-

199,-

KJØP
-10%
RPM Rear A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

199,-

Ikke på lager
NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon.   This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High  Current Connector and Integrated Balance Connector   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 2S2P  Continuous Discharge: 25C (55A)  Max Burst Rate: 50C (110A)  Watt Hours: 16.28  Charge Rate: 1C (2.2A)  Max Charge Rate: 2C (4.4A)  Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm)  Weight: 4.2oz (118g)

549,-

569,-

KJØP
-4%
Disse lagerene er samme størrelse som Tamiya 850 Ball bearings, black rubber sealed (5x8x2.5mm) (2)

49,-

KJØP
EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification   One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! ­ ­ QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER ­ Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries ­ ­     EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: ­ 100–240 Volts Charge Current Range: ­ 1.0-4.0A (40W Max.) Discharge Current Range: ­ 500mAh Current Drain For Balance Ports: ­ 500mAh NiMH Battery Cell Count: ­ 5–8 Cells LiPo Cell Count: ­ 2–3 Cells Net Weight: ­ 365g Dimensions: ­ 146 x 123 x 53mm     MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

KJØP
-9%
This is the Traxxas Power Cell 7.4V 7600mAh 25C 2S LiPo Battery with iD Connector. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 7.4V 7600mAh 25C LiPo 2S Battery with iD Connector and Integrated Balance Connector REQUIREMENTS Balancer and LiPo compatible charger such as the Traxxas AC Powered EZ-Peak Plus Battery Charger, TRX2970 LiPo charging bag SPECIFICATIONS Configuration: 2S2P Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 6.1 x 0.98 x 1.8" (155 x 25 x 45mm) Weight: 13.2oz (375g)

995,-

1.095,-

KJØP
-9%
This is the Hold Down Battery Set for the 2WD Traxxas Slash. FEATURES: Black nylon construction INCLUDES: One Battery Hold Down           One Retainer Hold Down           One Battery Post           One Foam Spacer           One Angled Body Clip REQUIRES: Installation on the chassis

79,-

89,-

KJØP
-11%
is is the Skid Plate Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Skidplate           One Rear Skidplate           One Transmission Skid Plate           Two Steering Servo Guards           One Steering Servo Cover Plate REQUIRES: Installation on the vehicle

129,-

KJØP
This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 1400mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S2P  Continuous Discharge: 25C (35A)  Max Burst Rate: 50C (70A)  Watt Hours: 15.54  Charge Rate: 1C (1.4A)  Max Charge Rate: 2C (2.8A)  Dimensions: 3.5 x 0.83 x 1.2" (89 x 21 x 30mm)  Weight: 4.2oz (118g)

469,-

489,-

KJØP
-4%
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
This is the optional Center Differential Kit for use on the                  Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Center Differential Kit REQUIRES: Installation on the vehicle  

259,-

Ikke på lager
Features: Viscosity 300CPS / 27WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

75,-

KJØP
This is the Long Travel Rocker Arm Set for the Traxxas Summit VXL. FEATURES Plastic construction Grey in color INCLUDES Eight long travel rocker arms Eight plastic bushings REQUIREMENTS Installation on to Summit SPECIFICATIONS Distance from Mounting Hole to Arm Hole: 22mm (0.83")

59,-

KJØP
Features: Viscosity 400CPS / 34WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
This Grease is specially formulated for ball type differential gearing. It helps prolong component life while still maintaining the proper tansmission

89,-

KJØP
  Truck Tires on 2.2" Wheels Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit. Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 90 mm Tire Width: 44.5 mm Weight (each): 87 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Uphill 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 8 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

269,-

289,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png