Hopp til innhold
-5%

Traxxas 9527T Tie-Bars Front Alu Orange Sledge

Art.nr: TRX 9527T

179,-

189,-

- 5%
Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tie-Bars Front Alu Orange Sledge

Tie bars, front, 6061-T6 aluminum (orange-anodized)

Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 9527R
Copied
Tie-Bars Front Alu Red Sledge Tie bars, front, 6061-T6 aluminum (red-anodized) Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.

179,-

189,-

På lager 2
KJØP
-5%
Art.nr: TRX 9527G
Copied
Tie-Bars Front Alu Green Sledge Tie bars, front, 6061-T6 aluminum (green-anodized) Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.

179,-

189,-

På lager 2
KJØP
-5%
Art.nr: TRX 9527A
Copied
Tie-Bars Front Alu Gray Sledge Tie bars, front, 6061-T6 aluminum (dark titanium-anodized) Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.

179,-

189,-

På lager 1
KJØP
-5%
Art.nr: TRX 9527
Copied
Tie-Bars Front Alu Sledge   Tie bars, front, 6061-T6 aluminum (blue-anodized)

179,-

189,-

På lager 2
KJØP
-5%
Art.nr: TRX 95076-4-BLUE
Copied
Traxxas Sledge™ 1/8 Truck 6s - Blue Redefining 1/8 Scale Off-Road! Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. Engineered for 6s Power Sledge is the only truck in this class with a properly sized, 6s-capable driveline. Bigger gears. More steel. Basically bombproof. Sledge smashes the status quo to be the new standard for extreme 6s durability. Superior Chassis Strength Sledge is engineered to have the strongest chassis in the class. The triangulated chassis structure integrates a deep-formed aluminum plate with a multi-point composite truss system and the patent-pending full-length T-Bar™. Built on a solid foundation, Sledge is strongest where it matters most. New Clipless Body Remove and replace the body in just seconds with exclusive patent-pending clipless body solutions engineered by Traxxas. Sledge’s clipless body goes on smoothly with a satisfying snap. The body is designed to come off when YOU release it. Monster Servo Sledge is equipped with a high-performance metal gear servo that packs massive torque inside a heat dissipating aluminum center case. Powerful and reliable steering authority is assured with no upgrade required. VXL-6s Power System The Velineon VXL-6s features new hardware and new tuning specifically for the 2000kV motor. Together they deliver substantially more power under the curve for increased mid-range punch and hard-charging acceleration you can see and feel. Sledgehammer Tires Premium Sledgehammer® tires are standard equipment. No tire upgrade required. Durable foam inserts are designed to not bunch up or break down. Patent-pending Traxxas innovation improves the tire bonding process to reduce the chance of a blown-out bead while exploring the upper range of Sledge’s capability. What’s In The Box: Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter. Specs: Length (including wing): 604mm Front Track: 459mm Rear Track: 459mm Ground Clearance: 50mm Weight (no battery): 5.77kg Height (overall): 214mm Wheelbase: 384mm Shock Length (front): 128mm Shock Length (rear): 144mm Tire Diameter: 170 x 84mm Wheel Diameter: 97mm (3.8") Speed Control: Velineon® VXL-6s (#3485) Motor (electric): Velineon® 2000kV Brushless Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: 3.2mm aluminum plate Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank w/metal servo arm Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver Servo: 2275 Waterproof, metal-gear (347oz-in torque) Top Speed: 112+ KPH with two 3S LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: Narrow configuration (L/W/H): 181 x 50 x 29/37/45mm* Wide configuration (L/W/H): 160 x 57 x 29/37/45mm* *Using included optional foam spacer Spec. Car Type: Truck, Truggy Delivered as: RTR (Ready-To-Run) Drive: 4WD Operating Mode: Electric Scale: 1/8 Suitable For: Experienced, Expert Surface: Grass, Gravel Length: 604 mm Ground Clearence: 50 mm Height: 214 mm Weight: 5770 g Width: 459 mm ESC: Traxxas Velineon VXL-6s Top Speed: 112km/h Transmitter: Traxxas TQi 2-Channel Motor Type: Brushless Motor/Engine: Traxxas Velineon 2000kV Battery: Not Included Charger: Not Included Water Proof: Yes

9.995,-

Kontakt oss for mer informasjon om dette produktet
KONTAKT

Kunder kjøpte også

Tires & wheels, assembled, glued (X-Maxx black wheels, Maxx AT tires, foam inserts) (left & right) (2). 8s Rated tires which doesn´t expand as much when going full speed with the X-Maxx 8s FEATURES Tires glued to wheels, ready to install Tires molded from rubber with aggressive all-terrain tread Molded plastic wheels, matte black in color INCLUDES Wheels Tires Foam Inserts SPECIFICATIONS Width: 4" (102mm) Diameter: 8" (203mm) Hex Size: 24mm

849,-

** Ikke på lager
KJØP
Traxxas 9541 Suspension Pins Inner F+R 4x67mm (2) Sledge Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

59,-

På lager 3
KJØP
Traxxas 9531T Suspension Arm Front Left Orange Sledge Suspension arm, front (left), orange

139,-

På lager 3
KJØP
Traxxas 9588 Shoulder Screws M3x16mm Hex Socket (2) Shoulder screws, 3x16mm (2)

29,-

På lager 2
KJØP
Traxxas 9634X Suspension Arm Covers Rear L+R Blue Sledge Suspension arm covers, orange, rear (left and right)/ 2.5x8 CCS (12)

59,-

På lager 1
KJØP
Traxxas 9530T Suspension Arm Front Right Orange Sledge Suspension arm, front (right), orange

139,-

På lager 2
KJØP
Traxxas 9550 Driveshaft CV Front Complete Sledge Driveshaft, steel constant-velocity (assembled), front (1)

269,-

279,-

** Ikke på lager
KJØP
-4%
Traxxas 9557 Driveshaft Rear 5x131mm Sledge Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)

109,-

På lager 3
KJØP
Yeah Racing RC Ball Bearing Set with Bearing Oil For Traxxas X-Maxx RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings   Features: Material: Steel Shielding: Rubber   Includes: Bearing (29 Pcs) -5mm x 11mm x 4mm x 7pcs -6mm x 13mm x 5mm x 2pcs -10mm x 15mm x 4mm x 3pcs -12mm x 18mm x 4mm x 1pc -15mm x 24mm x 5mm x 8pcs -17mm x 26mm x 5mm x 4pcs -20mm x 27mm x 4mm x 4pcs Bearing Oil (15ml) #YA-0215 X 1 Pc

329,-

349,-

** Ikke på lager
KJØP
-6%
These are the Steering Bellcranks  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction  Steel servo saver spring   INCLUDES Two Steering Bellcranks  Bellcrank Support  Servo Saver  Spring  Drag Link  Two 3x20mm Shoulder Screws

159,-

169,-

På lager 1
KJØP
-6%
These are the Front and Rear Skidplates  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction  Reduces damage to underside of chassis and other components during  chassis bottoming   INCLUDES One each;  Front and Rear Skidplate  Two Rubber Mounts

119,-

På lager 2
KJØP
This is the Front Shock Tower  for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic construction, dark gray in color   INCLUDES Left and Right Front Shock Tower Halves

109,-

På lager 2
KJØP
Traxxas 9523T Chassis Brace Alu Orange Sledge Chassis brace (T-Bar), 6061-T6 aluminum (orange-anodized)/ 3x16 SS (2)

349,-

På lager 1
KJØP
Steering blocks, 6061-T6 aluminum (orange-anodized), left & right/ steering block arms (2) Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style. The steering arms are replaceable with part 9636 for even more custom color options. Includes 3x10 mm screws with threadlock (4), 4x16 mm screws with threadlock (4), 3x18 mm screws (2), and locknuts (2).

599,-

639,-

På lager 1
KJØP
-6%
Carriers, stub axle, 6061-T6 aluminum (orange-anodized) (left and right) Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a brilliant anodized finish. Includes 3x18 mm screws with threadlock (2)

829,-

869,-

På lager 1
KJØP
-5%
Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right/ kingpin bushings (4) Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (2).

899,-

979,-

På lager 1
KJØP
-8%
Sway Bar Kit Sledge   Sway bar kit, Sledge™ (front and rear) (includes front and rear sway bars and linkage)

419,-

439,-

** Ikke på lager
KJØP
-5%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png