Hopp til innhold

Traxxas 8976 Wheelie Bar Black Maxx

Art.nr: TRX 8976

299,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Wheelie Bar Black Maxx

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 8919R Battery Hold-down Set Maxx (Long Wheelbase) Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase))

129,-

På lager 2
KJØP
Body Maxx (Long Wheelbase) Clear Body, Maxx® (clear, requires painting)/ window masks/ decal sheet (fits Maxx® with extended chassis (352mm wheelbase)) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the kit.

449,-

På lager 1
KJØP
Bumper Rear Maxx

69,-

På lager 1
KJØP
Bumper Front Maxx

69,-

På lager 2
KJØP
Bumper Mount Front Maxx

59,-

På lager 1
KJØP
Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))

215,-

På lager 1
KJØP
Tailgate protector/ 3x15mm flat-head screw (4)

49,-

På lager 1
KJØP
Cush drive key/ pin/ elastomer damper

39,-

På lager 1
KJØP
This is the Extra Hard 25 Tooth 32 Pitch Blackened Finish Pinion Gear from Robinson Racing. FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 25 Tooth 32 Pitch Blackened Finish Pinion Gear 4mm Set Screw

239,-

På lager 1
KJØP
Robinson Racing Extra Hard Steel Mod1 Pinion Gear w/5mm Bore (25T)   Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

279,-

** Ikke på lager
KJØP
This is a pair of pre-mounted Badlands 3.8" All Terrain Tires. Are you ready to tackle any terrain? If so, then the Badlands tires are the answer for you! The Badlands tires offer motocross style tread that is perfect for adrenaline-pumping Monster Truck and Truggy bashing. The Badlands tread is made strictly for the motocrosser in you. Its oversized grass and dirt shredding lugs offer you the ultimate in performance under all-terrain type conditions. The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new pre-mounted Badlands 3.8" tires now!   Tire Features: Readers' Choice Award Winning Tread Design Aggressive Tire Design Tire Based on Motocross Tread Technology Large Tire Lugs for the Ultimate in Tire Durability Wheel Features: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included What`s included: Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2 pcs) 8x32 to 17mm 1/2" Offset Hex Adapters (2 pcs) M3 x 12mm long SHCS hardware (16 pcs)

849,-

899,-

** Ikke på lager
KJØP
-6%
Toe links, 119.8mm (108.6mm center to center) (black) (2) (for use with #8995 WideMaxx™ suspension kit)

89,-

På lager 1
KJØP
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

219,-

På lager 3
KJØP
Bumper Mount Rear Maxx

59,-

På lager 3
KJØP
Skidplate, front (1), rear (1)

99,-

På lager 6
KJØP
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

På lager 5
KJØP
Ultimate Handling for Extreme Performance The Traxxas Maxx offers more power than ever before into a 1/10 scale monster truck platform. To take things up another level, the Traxxas WideMaxx kit extends the track width by 20 mm per side, allowing you to bury the throttle in the turns, soak up even more extreme terrain, and come out the other side ready for more.   The WideMaxx kit consists of extended versions of the Maxx’s extreme-duty cold-weather suspension arms, available in 6 total colors to allow you to customize your truck to your style. Additionally, new springs are included for the rear of the truck to dial in the suspension settings, while the original rear springs move to the front for optimum balance and performance. Finally, a set of wider toe links for the front finish out the new widened stance.   Available in six different color options Widens the Maxx by 1.57” (40 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspenson arms (4) WideMaxx toe links (2) Rear springs (1.725 rate)   Installation is simple, thanks to the Maxx’s thoughtful engineering throughout which makes removal and replacement of the included components quick and easy. The option to utilize existing components including the stock axles saves time and gets you back to the action with a whole new driving experience even faster.     Optional WideMaxx Upgrades:   Steel CV Driveshafts Built to take brutal punishment in stride, the Maxx's optional steel CV driveshafts #8996X are extended specifically for the WideMaxx kit. The set features all-steel construction and includes all required bearings. (#8654, #8654G, or #8654R and #7758, #7758G, or #7758R required for a complete set). Shafts also available separately (#8996A).   TUBES Toe Links TUBES lightweight 7075-T6 aluminum toe links are 30% lighter than steel and stronger than titanium. These are the strongest toe links you can buy for your WideMaxx. The secret is in the unique hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight. TUBES are the perfect high-performance upgrade for your WideMaxx and come brilliantly anodized in four different colors: orange (#8997A), green (#8997G), red (#8997R), and blue (#8997X).

639,-

699,-

På lager 1
KJØP
-9%
Ultimate Handling for Extreme Performance The Traxxas Maxx offers more power than ever before into a 1/10 scale monster truck platform. To take things up another level, the Traxxas WideMaxx kit extends the track width by 20 mm per side, allowing you to bury the throttle in the turns, soak up even more extreme terrain, and come out the other side ready for more.   The WideMaxx kit consists of extended versions of the Maxx’s extreme-duty cold-weather suspension arms, available in 6 total colors to allow you to customize your truck to your style. Additionally, new springs are included for the rear of the truck to dial in the suspension settings, while the original rear springs move to the front for optimum balance and performance. Finally, a set of wider toe links for the front finish out the new widened stance.   Available in six different color options Widens the Maxx by 1.57” (40 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspenson arms (4) WideMaxx toe links (2) Rear springs (1.725 rate)   Installation is simple, thanks to the Maxx’s thoughtful engineering throughout which makes removal and replacement of the included components quick and easy. The option to utilize existing components including the stock axles saves time and gets you back to the action with a whole new driving experience even faster.     Optional WideMaxx Upgrades:   Steel CV Driveshafts Built to take brutal punishment in stride, the Maxx's optional steel CV driveshafts #8996X are extended specifically for the WideMaxx kit. The set features all-steel construction and includes all required bearings. (#8654, #8654G, or #8654R and #7758, #7758G, or #7758R required for a complete set). Shafts also available separately (#8996A).   TUBES Toe Links TUBES lightweight 7075-T6 aluminum toe links are 30% lighter than steel and stronger than titanium. These are the strongest toe links you can buy for your WideMaxx. The secret is in the unique hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight. TUBES are the perfect high-performance upgrade for your WideMaxx and come brilliantly anodized in four different colors: orange (#8997A), green (#8997G), red (#8997R), and blue (#8997X).

639,-

699,-

På lager 1
KJØP
-9%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png