Hopp til innhold

Traxxas 8922 Chassis (Main) Maxx

Art.nr: TRX 8922

259,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Chassis (Main) Maxx

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Scale Accessory Luggage Net 65mm X 105 mm For 1/18 RC / TRX-4M Scale functional roof netting to keep your accessories in place when crawling. Hooks keep the net in place.   Features: For: Traxxas TRX-4M / 1/18 RC Material: Fabric, Steel Hooks Color: Red   Includes: Luggage Net (1 pack)

129,-

149,-

KJØP
-13%
Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) Set of four 17 mm orange-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

259,-

KJØP
-8%
Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)

59,-

KJØP
Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

85,-

KJØP
Steering blocks, 6061-T6 aluminum (blue-anodized), left & right

639,-

699,-

KJØP
-9%
Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)

629,-

KJØP
Wheel Washers Red (4) Maxx

25,-

KJØP
Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right/ 4x22mm pin (4)/ 3x6mm BCS (4)/ retainers (4)

629,-

649,-

KJØP
-3%
Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

149,-

159,-

KJØP
-6%
Housing, cush drive (front & rear halves)

39,-

49,-

KJØP
-20%
  Louise X-PIONEER - X-MAXX Tires - FRONT & REAR Truck tires for the high performance Traxxas X-MAXX. The new X-PIONEER tire has the new incorporated MFT technology that is engineered to limit tire expansion (normally refered to as "balooning"). They are mounted on a new very sturdy black nylon 7-spoke wheels with a X-Maxx specific 24 mm hex. The X-PIONEER tire is a good allround tire for most rough surfaces! Micro Fiber Tech Features (MFT): New innovation and technlogy Reduces over balooning More ridgid overall tire structure Less distorsion/flex Stable and even contact with the road surface - more grip and longer tire life Fits: Traxxas X-MAXX 6s Traxxas X-MAXX 8s (Also may fit other trucks with 24 mm hexes) Specs: Micro Fiber Tech system (MFT) Wheel diameter: Tire Diameter: 212.8 mm Tire Width: 98.2 mm Weight (each): Hex: X-Maxx 24 mm Tire Compound: Sport Wheel finish: Black Nylon

699,-

749,-

KJØP
-7%
Bumper Front Maxx

69,-

KJØP
Toe links, front (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (88mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)

459,-

KJØP
Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We’re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection. Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!    

219,-

239,-

KJØP
-8%
Adjustable Height Body Mounts for the Traxxas Slash 4×4 & Stampede 4× Quick Notes: – replaces stock Traxxas #6815R – fits either front or rear location on the Slash 4×4 – fits the rear location on the Stampede 4×4 Description RPM Adjustable Height Body Mounts for the Traxxas Slash 4×4 & Stampede 4×4 are designed to give you optional body height positions where stock left you none. Our version of the Slash 4×4 body mount starts off lower than stock by 1/8” (or approx. 3.2mm). We supply a pair of molded spacers to allow you the option of a stock height body position using the thin spacer under the body mount. If monster suspension travel is needed or you just like the higher stance and larger wheel well openings a taller body mount provides, you can increase the height by 1/8” using the thicker of the two spacers. In extreme cases, both spacers may be used for a full 1/4”* (6.35mm) of extra body height. We weren’t solely going for looks either. RPM body mounts are just plain tough! We engineered new, larger ribs into the mounts to provide extra rigidity and support for the body while keeping weight to a minimum. We mold these body mounts in black from our proven-tough blend of engineering-grade materials, which provides extra durability and impact-resistance in the most extreme situations. What’s Included: Each kit contains two body posts, one body mount bracket, two spacers and two M3 x 16mm mounting screws. Two kits will be needed to complete one vehicle.  

129,-

KJØP
Driveshaft Center Alu Maxx

119,-

KJØP
Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel)

39,-

KJØP
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))

215,-

KJØP
Speed bit, nut driver, 5.5mm

99,-

119,-

KJØP
-17%
Carrier, differential/ x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW

49,-

KJØP
  Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)

215,-

KJØP
Speed bit, nut driver, 8.0mm

99,-

119,-

KJØP
-17%
Speed bit, nut driver, 7.0mm

99,-

119,-

KJØP
-17%
Speed bit handle, premium (rubber overmold), medium size

109,-

119,-

KJØP
-8%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png