Hopp til innhold

Traxxas 8916 Mount Tie Bar & Suspension Pin Retainer Set Maxx

Art.nr: TRX 8916

59,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Mount, tie bar, front (1)/ rear (1)/ suspension pin retainer, front or rear (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 7462-GRAY - Shocks, GTR xx-long (gray) (assembled) (2) (without springs) 1/10 scale XX-long GTR shocks represent the peak of suspension technology. Their 13 mm bores hold over 70% more oil than the standard Ultra Shocks. X-ring seals keep oil in and dirt out for smooth, consistent damping, and plush suspension action. Spring preload and ride height changes are as simple as turning the threaded spring collars. The lower spring retainers even feature a locking screw to prevent annoying pop-off in the middle of your run. Includes 30-weight pure silicone shock oil. (Sold in pairs, springs sold separately)

319,-

349,-

På lager 1
KJØP
-9%
M-DRIVE Hex/Allen Wrench Spare Tip - 2.5mm Ball Hex High quality hex/allen wrench spare HSS steel ball tip. Specs: Length: 100mm Tip/Bits Hex Size: 2.5mm (ball) Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head Note that a ball head hex/allen tool tip always wear faster that a straight hex. They are also more easy to brake when dropping them on the floor or using too much force while tightening/losening a screw.

39,-

På lager 8
KJØP
Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Pair of 87 mm composite toe links come assembled with hollow balls. Fits front or rear.

49,-

59,-

På lager 3
KJØP
-17%
Robinson's standard alloy 32 pitch pinion gears are a great replacment for most Kyosho cars and any cars that are 32 pitch. SPECS:   Number of Teeth: 12 Pitch: 32

89,-

** Ikke på lager
KJØP
The Chevy Suburban body comes complete with window mask, paint-then-peel protective film, and detail decal sheet. If your looking to make a break from the status quo and add some style to the daily routine, then check out the Chevy Suburban body by Pro-Line. Simply the finest! Features: Available for the two most popular size monster truck chassis Paint then peel overspray film, detailed stickersheet, and window masks included Made from .060 lexan – the toughest on the market.

199,-

349,-

På lager 1
KJØP
-43%
This is the Pacer Red Z-71 Thread Locker. FEATURES: High-strength, premium grade red liquid locks and seals metal nuts,              bolts, and studs or metal fasteners up to 1" (26mm) in diameter           Holds in temperature ranges from -65°F - 300°F (-54°C - 149°C)           Resistant to gasoline and oil INCLUDES: One bottle .20oz (6ml) Pacer Red Z-71 Thread Locker REQUIRES: Applying bead around part to be bonded and assemble with a twisting             motion to spread adhesive. Allow to cure 24 hours for maximum             strength COMMENTS: Avoid contact with eyes and skin.  In case of eye contact, rinse             immediately with plenty of water and seek medical advice.  Wash             skin thoroughly with soap and water after use. Seek medical advice             if irritation persists.

59,-

På lager 1
KJØP
This is a Rod End Set for the Traxxas Revo                     used with the optional GTR shocks. FEATURES: Plastic construction           Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS:    Length:              18.35mm (0.72")           Width at ball joint: 10.35mm (0.40") COMMENTS: If Pivot Balls are needed, use TRX 5355.

25,-

På lager 1
KJØP
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL. FEATURES: Composite construction           Allows installation of taller multi-cell batteries INCLUDES: Battery Hold Down with metal Post and Body Clip REQUIRES: Fastening to chassis COMMENTS: For stock battery holder, order TRX 6727X

75,-

På lager 3
KJØP
NB!! Passer ikke til Mamba X må tilpasses.   This is the Mamba ESC Mounting Plate from Traxxas. FEATURES: Nylon construction           Black in color INCLUDES: One ESC Mounting Plate           Two 3x35mm Cap Head Screws           Foam Padding REQUIRES: Use with Castle Creations Mamba ESC

39,-

På lager 1
KJØP
Motor Mount (for optional motor #3481) Maxx Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1) (for installation of #3481 motor into Maxx®) New front and rear motor mounts allow you to install the powerful 3481 Velineon® 6s 2200kV brushless motor in your Maxx®. (3481 motor also requires VXL-6s ESC)

99,-

109,-

På lager 1
KJØP
-9%
Output gear, center differential, hardened steel (2)

199,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Output gear, center differential, hardened steel (2)

299,-

På lager 1
KJØP
This is the 54T Spur Gear for the Traxxas X-Maxx Monster Truck. FEATURES Hardened steel construction INCLUDES 54T Spur Gear SPECIFICATIONS Number of Teeth: 54 Pitch: 1.0 metric Pressure Angle: 20°

219,-

** Ikke på lager
KJØP
    MEDIUM VISCOSITY     MULTI PURPOSE FORMULA     STRONG AND FLEXIBLE      DRIES CLEAR     IDEAL FOR LEXAN PT-22   1/2 oz. Poly-Zap POLY ZAP Is a specialty CA adhesive developed for use on today’s newer plastics. Lexan is one of the more difficult plastics to bond, and POLY ZAP was developed to solve that problem. It works on many types of films and painted surfaces. Its perfect for today’s ARF type models. ABS cowls, canopies, Lexan car bodies, fiberglass repair, model boat parts, and automotive trim are just a few of the many applications for POLY ZAP. To prevent fogging of clear parts do not use a Kicker. Works best on: ABS Delron Fiberglass Lexan Most Acrylics Polycarbonate Nylon Rubber Styrene

99,-

** Ikke på lager
KJØP
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

På lager 19
KJØP
Adapter, standard servo (adapts standard servo to fit in X-Maxx)

79,-

På lager 2
KJØP
  Screws 4x25mm button-head machine (hex drive) (6)

39,-

På lager 7
KJØP
This is a 4x14mm Button Head Screw Set for the Traxxas Revo vehicle. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  16mm (.63")           Threaded Length: 14mm (.55")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the Roll Hoop.

35,-

På lager 1
KJØP
This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x20mm button head screw is required INCLUDES: Six 3x20mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench

35,-

På lager 4
KJØP
Traxxas 10233 - Front Bumper Bumper mount, front Replacement front bumper mount Replacement part for these models: Maxx® Slash®

99,-

109,-

På lager 2
KJØP
-9%
High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX6 Applications: This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It's the ideal option for high-end aggressively powered builds. Specifications Scale: 1/6th 1/7th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A   Wires & Connectors Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)   Fan Size: 35.0x35.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC   ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port   Firmware Firmware Upgrade: Supported   Size & Weight Size: 70.0x56.0x46.5mm Weight: 240g   Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/6th 1/7th Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV≤1500/8S LiPo: KV≤1200(5892 Size Motors) Click here to look at the FAQ and Software Updates for EzRun MAX6 This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.  

1.795,-

2.195,-

** Ikke på lager
KJØP
-18%
Traxxas® connector, 4s (male) (2) - FOR ESC USE ONLY FOR ESC USE ONLY The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed control. Requires 8527 jumper plug for unused battery lead. (Factory replacement plugs for 3465 and 3496 ESCs)

69,-

På lager 3
KJØP
 This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.              These pins go through the stub axles on each wheel,                the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins           Axle pins are steel   INCLUDES: Four 2.5x12mm axle pins   REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs             (4954) over pins.    

19,-

På lager 6
KJØP
Shock caps, GT-Maxx® shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks)

69,-

På lager 4
KJØP
Suspension arms, lower, black (left and right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

145,-

På lager 2
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png