Traxxas

Traxxas 8679 Differential Gear Set

Art.nr: TRX 8679

239,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Ring gear, differential/ pinion gear, differential

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 5101A Ball Bearings Black Rubber Sealed ...

Traxxas 5101A Ball Bearings Black Rubber Sealed ...

Traxxas 5101A - Ballbearing 12x21x5mm - Black Rubber Seal (2) 5101A with Black seal: Rubber seal in full contact with the inner ball race More rotational resistance Less maintenance needed 5101 with Blue seal: Rubber seal not in contact with the inner ball race Less rotational resistance More maintenance needed

99,-

109,-

-9%

Hovedbilde Traxxas 5118A Ball bearings, black rubber sealed ...

Traxxas 5118A Ball bearings, black rubber sealed ...

Ball bearings, black rubber sealed (8x16x5mm) (2)

79,-

Hovedbilde Traxxas 5120A Ball bearings, black rubber sealed ...

Traxxas 5120A Ball bearings, black rubber sealed ...

Ball bearings, black rubber sealed (12x18x4mm) (2)

109,-

Hovedbilde Traxxas 5180A Ball Bearings Black Rubber Sealed ...

Traxxas 5180A Ball Bearings Black Rubber Sealed ...

Ball bearings, black rubber sealed (6x13x5mm) (2)

65,-

Hovedbilde Traxxas 3939 Button Head Machine Screw 4x6mm Revo (6)

Traxxas 3939 Button Head Machine Screw 4x6mm Revo (6)

This is a 6 pack of Traxxas 4X6mm Button Head Screws. FEATURES: Steel construction Black in color Button head design INCLUDES: (6) 4X6mm button head screws SPECS: Length: 1/4" (6mm) Diameter: 3/16" (4mm)

39,-

Hovedbilde Traxxas 5321 Steel Suspension Pin Set Revo

Traxxas 5321 Steel Suspension Pin Set Revo

This is the Steel Suspension Pin Set for the Traxxas Revo. They are also commonly known as Hinge Pins. FEATURES: Steel construction Polished finish INCLUDES: Two Long Suspension Pins Four Short Suspension Pins REQUIRES: Assembly to vehicle If the Caster Spacers are need, use TRX 5134 SPECS: Long Suspension Pin Length: 85mm (3.35") Short Suspension Pin Length: 24mm (0.95") Pin Diameter: 3.3mm (0.13")

59,-

Hovedbilde Traxxas 2578 Button Head Screws 3x12mm (6)

Traxxas 2578 Button Head Screws 3x12mm (6)

These are 3x12mm Button Head Screws from Traxxas FEATURES: Steel Construction Black in color Hex head INCLUDES: Six button head screws SPECS: Length: 12mm (.47") Diameter: 3mm (.12") COMMENTS: These can be use with various application.

35,-

Hovedbilde Traxxas 2577 Button Head Screw 3x10mm Revo (6)

Traxxas 2577 Button Head Screw 3x10mm Revo (6)

This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction Black in Color Button Head Type Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

Hovedbilde Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 12mm (.63") Threaded Length: 11mm (.45") Thread Size: M4x.7mm coarse Hex Wrench Size 2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Hovedbilde Traxxas 5627 Door Battery Compartment E-Revo

Traxxas 5627 Door Battery Compartment E-Revo

This is the Battery Compartment Door for the Traxxas E-Revo 1/10 and Summit 1/10. FEATURES: Nylon construction Black in color INCLUDES: Two Battery Compartment Door

59,-

Hovedbilde Traxxas 5343X Mount Steering Arm Steering Stops (2)

Traxxas 5343X Mount Steering Arm Steering Stops (2)

This is the Steering Arm Mount for the Traxxas Revo. FEATURES: Black plastic construction Standard and maximum throw steering stops INCLUDES: Steering arm mount TRX 5343X Steering stop TRX 5343X REQUIRES: Installation on the Traxxas Revo

45,-

Hovedbilde Traxxas 8637 Skid Plate Set

Traxxas 8637 Skid Plate Set

Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)

95,-

Hovedbilde Traxxas 5637X Skidplate Transmission Black

Traxxas 5637X Skidplate Transmission Black

Skidplate Transmission Black

119,-

139,-

-14%

Hovedbilde Traxxas 5148 Grease White Lithium

Traxxas 5148 Grease White Lithium

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES: Great lubrication for nylon gears INCLUDES: One tube of lithium grease (volume unknown) REQUIRES: Application to parts needing lubrication.

39,-

Hovedbilde Robinson Racing 8623 X-Hard 23T Black Steel 32P Pinion ...

Robinson Racing 8623 X-Hard 23T Black Steel 32P Pinion ...

This is the Extra Hard 23 Tooth 32 Pitch Blackened Finish Pinion Gear from Robinson Racing. FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 23 Tooth 32 Pitch Blackened Finish Pinion Gear 4mm Set Screw

229,-

Hovedbilde Traxxas 7881 Differential Rear Pro-Built X-Maxx 8s

Traxxas 7881 Differential Rear Pro-Built X-Maxx 8s

Traxxas 7881 - Pro-Built X-Maxx 8s Rear Differential Differential, rear, complete (fits X-Maxx® 8s) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: X-Maxx®

649,-

749,-

-13%

Hovedbilde Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

89,-

99,-

-10%

Hovedbilde RC4WD 0119 Mojave II Four Door Complete Body Set

RC4WD 0119 Mojave II Four Door Complete Body Set

Mojave II Four Door Complete Body Set Specifications: Injection Molded Plastic Hard Plastic Hand Modified Primer Gray Drop Bed Clear Lexan Window Dash with Steering Wheel Decal Sheet for Dash Primed and Ready for Paint Requires Assembly Wheelbase: 12.3in / 313mm Total Length: 20.0in / 510mm Total Width: 7.4in / 188mm Total Height: 5.2in / 133mm Total Weight: 21.1oz / 600g

1.995,-

2.195,-

-9%

Hovedbilde Traxxas 7754X Drive Cup (1)/3x8mm CS X-Maxx(1)

Traxxas 7754X Drive Cup (1)/3x8mm CS X-Maxx(1)

X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

149,-

Hovedbilde Tamiya 87042 Surface Primer L Gray

Tamiya 87042 Surface Primer L Gray

This is a 180ml Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal. FEATURES Easy application. This light gray primer has excellent coverage and is recommended for use prior to painting a light color onto a darker colored material. It can be used on plastic or metal. Air spray can. Color coded plastic lid. INCLUDES One Can of Surface Primer L REQUIREMENTS Well Ventilated Area SPECIFICATIONS Contains: 180ml

139,-

Hovedbilde Tamiya 85037 Spray Lacquer TS-37 Lavender 3 oz

Tamiya 85037 Spray Lacquer TS-37 Lavender 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Lavender Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

Hovedbilde Tamiya 54393 Type 380 Sport-Tuned Motor

Tamiya 54393 Type 380 Sport-Tuned Motor

This is a new Type 380 Sport-Tuned Motor for RM-01 and TA05 M-Four chassis. When used with the model's standard gear ratio, it offers a higher top speed and improved acceleration than Type 380-S motor. The pre-wired cables have 4mm diameter standard connectors. INCLUDES One Type 380 motor Two pinion adapters SPECIFICATIONS Diameter: 28mm (1-1/16") Length: 38mm (1-1/2") Shaft diameter: 2.3mm (3/32") Shaft length: 13mm (1/2") Turns: 29 Top speed: 27km/h (measured on TA05 M-FOUR chassis) Lead length: 85mm (3-3/8") Pinion adapter, length: 12.4mm (1/2") diameter: 3.2mm (1/8") COMMENTS Compatible with RM-01 and TA-05 M-Four chassis machines. Not compatible with Item 58470 Holiday Buggy (2010) & Item 58500 Sand Rover (2011).

169,-

Hovedbilde Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

This is a set of Traxxas 6x13x5mm Ball Bearings for use on the E-Revo FEATURES: Stainless Steel bearing construction Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings Part #5180 SPECS: Inside diameter: 6mm (0.24") Outside diameter: 13mm (0.51") Width: 5mm (0.20")

65,-

Hovedbilde Tamiya 9005229 C Parts for 58063 Lunchbox

Tamiya 9005229 C Parts for 58063 Lunchbox

This is the "C" Parts for the Tamiya Lunchbox Kit. This bag contains the chrome parts used to accent the body. FEATURES Chrome finish Plastic construction INCLUDES One front bumper/grille, rear bumper, shock bodies, running boards/ side pipes and body post

149,-

159,-

-6%

Hovedbilde Tamiya 81514 Acrylic Mini X-14 Sky Blue 1/3 oz

Tamiya 81514 Acrylic Mini X-14 Sky Blue 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Sky Blue paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-