Hopp til innhold
-5%

Traxxas 8670 Tires Talon EXT 3.8" (2)

Art.nr: TRX 8670

369,-

389,-

- 5%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tires, Talon EXT 3.8" (2)/ foam inserts (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Tires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon Extreme tires, foam inserts) (2) (TSM rated)

369,-

399,-

KJØP
-8%
Push rods (steel), heavy duty (2) (assembled with rod ends)

99,-

KJØP
Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

139,-

KJØP
KJØP
RPM Tubular Front Bumper for Revo 3.3 & E-Revo (old) Replaces stock Traxxas #5335 Quick Links: Replaces stock Traxxas #5335 Matching Revo Rear Bumper is available Supporting Bumper Mount is available RPM provides the added protection the Revo needs with unbelievable strength and durability in our tubular front and rear bumpers. RPM bumpers for the Traxxas Revo are made from our bulletproof blend of nylons. RPM nylons are the best material for protecting your Revo since our materials are lightweight, inexpensive, and tougher than anything else available! We’ve re-engineered the front and rear bumpers to improve strength, especially around the screw holes, which eliminates potential weak points, and we’ve designed a recessed flat where with a little creativity, anyone can add in a customized, scale license plate. Additionally, our rear bumper has a flat area perfect for adding a ball stud for a faux ball hitch (see our FAQ page of our website for more information). Our colors are molded into each bumper so scratches and nicks won’t cut through to a different color underneath. In addition, our chrome bumpers are molded over our metallic silver bumper so scratches won’t show as easily as a stock bumper (where black is the base color). RPM bumpers carry our lifetime warranty against breakage and will hold up to the roughest of punishment.

119,-

KJØP
This is the Rocker Arm Set Progrssive 3 (90-T)                        for the REVO from Traxxas. FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set REQUIRES: TRX 5319 ot 5319X Pushrod

99,-

KJØP
Traxxas 8652X Drive cup, steel, extreme heavy duty (2)/ 4x17mm screw pins, heavy duty (2) (machined, heat treated) Give your E-Revo® the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade heat-treated steel to resist rounding out from dogbone contact. Includes heavy-duty 4x17 mm screw pins (2). Accessory part for these models: E-Revo® VXL Brushless

299,-

319,-

KJØP
-6%
RPM Body Savers for Traxxas E-Revo "2.0" Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #8611, #8611A & #8611G bodies RPM engineers examined a brand new E-Revo 2.0 body and were shocked when they discovered cracks around the body mount holes in the body. This vehicle had never been run and the holes were already weakened. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body for $85! RPM Body Savers for the E-Revo 2.0 are a simple, yet clever solution to solve that problem. We disguise our Body Savers in two separate ways. Out front, they look like molded hood vents while in the rear, they look like exposed sections of a roll cage. It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward; there are two pairs of screws holding the sub-frame of the body mounting system to the body in both the front and rear of the truck. Our Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body (wider than currently available washers too). Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with four Body Savers in each kit (two for the front and two for the rear). Tech Notes: RPM Body Savers only work with Traxxas #8611, #8611A & #8611G bodies. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies

149,-

KJØP
Dusty Motors Dust Protection Cover for Traxxas E-revo & Summit - Black DMC0011 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

KJØP
This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.     FEATURES Aluminum construction, blue in color   INCLUDES Rear Chassis Brace  Two 3x35mm Socket Head Screws  One 4x14mm Button Head Screw  Instruction Sheet   SPECIFICATIONS  Length: 5.1" (129mm)

129,-

139,-

KJØP
-7%
These are the optional 17mm Splined Wheel Hubs for the E-revo 1/10 and E-max 1/10 with brushmotor.              FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel hubs and nuts REQUIRES: Installation on the vehicle

289,-

299,-

KJØP
-3%
19T HD Steel Mod1 5mm Bore Motor Gear Pinion 5mm bore Mod1 pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease.   Features: For: 5mm Shaft Motors Material: HD Steel Color: Black   Includes: Pinion Gear (1 pc) Set Screw (1 pc)

69,-

KJØP
Body, Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet

489,-

539,-

KJØP
-9%
Body, E-Revo (clear, requires painting)/window, grill, lights decal sheet

349,-

369,-

KJØP
-5%
Body, Desert Racer (clear, trimmed, requires painting)/ decal sheet

849,-

899,-

KJØP
-6%
Skid plate, roof (body) (black)/ 3x10mm CS (4)

79,-

89,-

KJØP
-11%
Body, Maxx® (clear, requires painting)/ window masks/ decal sheet

389,-

429,-

KJØP
-9%
Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

KJØP
-11%
Tailgate protector/ 3x15mm flat-head screw (4)

49,-

KJØP
    Traxxas New E-REVO   POWER. STRENGTH. SPEED. There is no other monster truck like E-Revo. It embodies the highest level of creativity in design and engineering that unleashed a stunning array of new technology, new innovation, and unheard of speed that reset every benchmark for racing monster truck performance. Now there is a new generation of E-Revo. This new E-Revo retains all the benefits of its original ground-breaking, award-winning design, but fortifies them with brute strength and an intense, take-no-prisoners attitude to deliver what is simply the ultimate 6s monster. Get ready for a whole new level of power, strength, and speed. MAXX-SPEC™ DRIVELINE Taking inspiration from its big brother X-Maxx, E-Revo’s drive system has evolved to meet today’s demands for punishing 6s performance. Jump higher. Rip harder. Release your inner beast mode. E-Revo comes out of the box ready to attack, ready for wherever your imagination takes you. SELF-RIGHTING E-Revo’s over-the-top power can sometimes land you upside down. Traxxas’ exclusive Self-Righting system keeps the fun going with minimal interruption. Simply press a button on the transmitter and, in most circumstances, E-Revo will be back on its wheels in just seconds. BRUTAL 6s POWER Armed with a fortified drivetrain, E-Revo’s VXL-6s power system now pounds out more tire-scorching motivation than ever before, all the way to 112+ kph. Advanced design and sophisticated microprocessor control make this the most punchy and reliable high-voltage VXL power system ever. Traxxas Extreme Power is the new normal and E-Revo comes ready for any challenge.   VXL-6s™ Waterproof Electronic Speed Control 6s LiPo compatible Integrated cooling fan Real-time telemetry via Traxxas Link Machined heat sink 3-LED status indicators Powered accessory ports 10-gauge silicone wire Patented Traxxas High-Current Connectors Velineon® 2200kV Brushless Motor 4-pole 2200kV brushless motor 5 mm output shaft Finned can for better heat dissipation Up to 112+ kph with Two 3s LiPo Batteries Traxxas Stability Management® (TSM) Improves straight line acceleration and braking on low-traction surfaces Never dulls throttle or slows the truck Adjusts from off to 100% assistance from the transmitter TQi™ 2.4GHz High Output Radio System TQi 2-channel transmitter Automatically stores and loads settings for up to 30 Traxxas Link-enabled models Programmable multi-function knob Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points High 13ms frame rate and near-zero latency for responsive control 5-channel micro receiver (#6533) with fail-safe security Patented waterproof receiver box with easy-access plug Drivetrain Maxx-Spec™ steel CVDs 8 mm steel stub axles Heavy-duty telescoping center driveshafts Transmission Mod-1 pinion and spur gears Fixed gear mesh system Torque-Biasing Center Drive Cush Drive (no slipper clutch) 5 mm aluminum motor plate Differentials Heavy-duty sealed 4-gear design Redesigned bulkheads with underside access Maxx-Spec™ ring and pinion gears Large 8 mm output shafts Steel drive cups Suspension Oil-filled GTR shocks with height-adjustable threaded aluminum bodies Inboard rocker arm suspension design for extreme articulation Low-CG design improves handling and protects components Upgraded heavy-duty axle carriers with oversized bearings Heavy-duty rocker arms and rod ends Chassis Reinforced composite tub for greater durability Vented internal battery compartments with quick-release doors Low-CG design for improved handling Tough skid plates for driveline protection ProGraphix® Body Clipless body mounting system Tough internal frame Adjustable rear wing External reinforcement for rollover protection Wheels and Tires Aggressive Talon™ EXT all-terrain tires New tire construction resists ballooning Tough 3.8" black wheels Splined 17 mm blue aluminum axle hubs Steering High-throw bellcrank steering design Dual waterproof 2075 servos for 250 oz.-in. of torque Sealed Ball Bearings Hex hardware with Rust-Resistant Black Oxide Coating Truck Specs: Length: 585 mm Width: 465 mm Ground Clearance: 73 mm Weight: 5.08 kg Height: 221 mm Wheelbase: 380 mm Front Shock Length: 87 mm Rear Shock Length: 87 mm Tires (pre-glued): 162 x 88 mm Wheels: 3.8 inches (97 mm) Speed Control: Velineon® VXL-6s Motor (electric): 2200kV Transmission: Single speed Gear Pitch: 1.0 Metric pitch (Mod-1) Final Drive Ratio: 20.49:1 Differential Type: Sealed, 4-gear Center Differential Type: Sealed, 4-gear (20M weight oil) Chassis Structure / Material: Composite tub Brake Type: Electronic Drive System: Shaft driven 4WD Steering: Bellcrank Radio System: TQi™ 2-channel transmitter with 6533 TSM receiver Servo: Dual 2075 Top Speed (optional gearing): 112+ kph Skill Level: 3 Battery Compartment: 156 x 50 x 29 mm Motor Specs: Type: 2200kV Sensorless brushless Weight: 406 g Length: 75.5 mm Diameter: 41.8 mm Connector Type: Traxxas 6.5 mm bullet connectors ESC Specs: Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts) Case Size: 58 x 72 x 46 mm Weight: 207 g On-Resistance (@Trans) - Fwd/Rev: 0.0003 Ohms per phase Reverse Delay: Yes, with lockout Low Voltage Detection (LVD): Yes, programmable What’s in the box: E-Revo with VXL-6s ESC and 2200kV motor Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools What You’ll Need: Batteries: E-Revo requires dual 2s LiPo batteries or dual 3s LiPo batteries. See full list of batteries Charger: Traxxas EZ-Peak Live charger (2971) is recommended for easy and fast charging performance AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

Traxxas 8953X - Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft) Replacement outer stub axle assembly. Fits front or rear. (Does not fit Maxx with WideMaxx® suspension.)

89,-

99,-

KJØP
-10%
Suspension arms, upper, black (left or right, front or rear) (2)

85,-

KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

KJØP
Tires & wheels, assembled, glued (black wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM rated)

569,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png