Hopp til innhold
-8%

Traxxas 8373A Tires & Wheels Response 1,9" Touring Orange Front

Art.nr: TRX 8373A

329,-

359,-

- 8%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tires and wheels, assembled, glued (split-spoke orange wheels, 1.9" Response tires) (front) (2) (VXL rated)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

E-flite 800mAh 3S 11.1V 30C LiPo, 18AWG JST EFLB8003SJ30 is compatible with BLH1400EU

439,-

469,-

KJØP
-6%
  Tires and wheels, assembled, glued (split-spoke orange wheels, 1.9" Response tires) (extra wide, rear) (2) (VXL rated)

269,-

KJØP
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
Screws, 3x12mm button-head machine (6) (starter attachment screws with Threadlock)

39,-

KJØP
Drive cups, inner (2)/ screw pins (2)

49,-

KJØP
Driveshaft, front (2)

99,-

KJØP
This is a Package of 3x15mm Cap Head Machine Screws with Split Washers.            FEATURES: Silver steel construction. INCLUDES: Six 3x15mm cap head machine screws           Six 3mm split washers REQUIRES: These could be used in many other applications requiring this size.

39,-

KJØP
This is the Input Shaft for use on the Traxxas Slash 4x4 Vehicles. FEATURES: Steel construction           Black in color INCLUDES: One Input Shaft           One Bearing Adapter           One Pin REQUIRES: Installation on the vehicle SPECS:    Length: 58mm (2.3")

79,-

KJØP
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

Ikke på lager
-9%
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Dette produktet er gått ut, og er erstattet med TRX 6835X This is the Front Bumper and Mount for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One Front bumper           One Front bumper mount REQUIRES: Installation on chassis

119,-

Ikke på lager
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
This is the Suspension Pin Set for the Traxxas Slash 4X4.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction           Silver in color INCLUDES: Four 51.5mm pins           Four 30mm pins REQUIRES: Installation on the Slash 4x4  

55,-

KJØP
Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) Replacement rear bumper and bumper mount for Slash® TRX 6894 LED light kit

139,-

KJØP
This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Front or rear application INCLUDES: One left suspension arm           One right suspension arm REQUIRES: Installation on suspension assembly SPECS:    Length: 100mm (3.94")           Width: 45mm (1.77")           Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

KJØP
-7%
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Front driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png