Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / 82224 TRX-4 Sport / Traxxas 8115 Body posts, front & rear

Traxxas 8115 Body posts, front & rear

Art.nr: TRX 8115

49,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Body posts, front & rear

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 8072 Fenders, inner, front & rear (2 each)/ ...
Traxxas 8072 Fenders, inner, front & rear (2 each)/ ...
Fenders, inner, front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flathead screws (4)

199,-

KJØP
Hovedbilde Traxxas 7763 Shock Shafts GTX 110mm X-Maxx (2)
Traxxas 7763 Shock Shafts GTX 110mm X-Maxx (2)
These are the Shock Shafts for the GTX Shocks  used on the Traxxas X-Maxx Monster Truck FEATURES Steel construction with composite plastic rod ends and pressed-in  ball links   INCLUDES Two each; Shock Shafts with Rod Ends and Ball Links

219,-

239,-

KJØP
-8%
Hovedbilde Tamiya 86063 PS-63 BRIGHT GUN METAL
Tamiya 86063 PS-63 BRIGHT GUN METAL
Tamiya PS-63 PS-63 BRIGHT GUN METAL These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.

119,-

KJØP
Hovedbilde Traxxas 7615 Body Mounts (Posts) Front/Rear Teton
Traxxas 7615 Body Mounts (Posts) Front/Rear Teton
These are the Front and Rear Body Mounts for the  LaTrax Teton Monster Truck from Traxxas.     FEATURES Plastic construction, black in color  Installs in shock towers and holds front and rear of body in place   INCLUDES Front and Rear Body Mounts for the Teton Monster Truck

39,-

KJØP
Hovedbilde Hobbywing QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 ... Hovedbilde Hobbywing QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 ...
Hobbywing QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 ...
QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 Crawler 2-3S Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate 30120202

699,-

749,-

KJØP
-7%
Hovedbilde Traxxas 7424 Box Receiver 1/10
Traxxas 7424 Box Receiver 1/10
 This is the Receiver Box for the 1/10 scale Traxxas. FEATURES: Plastic construction, black in color INCLUDES: Upper and lower Case Halves with Wire Cover           Gasket           Two Foam Pads           Two 3x12mm Button Head Cap Screws           Two 3x6mm Button Head Cap Screws           Two 2.5x12mm Cap Screws           Instruction Sheet SPECS:    Box Dimensions: 1.6 x 1.7 x 2.1" (41 x 43 x 54.5mm)

149,-

KJØP
Hovedbilde
"Bulk" Traxxas 8219 Rock Sliders Left and Right TRX-4
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 8219 Rock Sliders Left and Right TRX-4 Rock sliders, left & right

79,-

Ikke på lager
Hovedbilde Pro-Line 2017 Ford F-150 Raptor Clear Body 12.3 Hovedbilde Pro-Line 2017 Ford F-150 Raptor Clear Body 12.3
Pro-Line 2017 Ford F-150 Raptor Clear Body 12.3" WB ...
Proline 2017 Ford F-150 Raptor Clear Body for 12.3" (313mm) Wheelbase Scale Crawlers This is a 2017 Ford® F-150 Raptor Clear Body for 12.3” Crawlers. Pro-Line is ready to unleash the officially licensed 2017 Ford® F-150 Raptor body for your 12.3” Crawler! This body will completely transform your Truck into an Ultra Scale aggressive Raptor Rig perfect for Rock Crawling. The details from the full-size 2017 Raptor have been faithfully recreated and will give your truck a unique look compared to the sea of old-school classic trucks that have been dominating the crawling scene. This single piece Pro-Line body is very light for a lower center of gravity and improved crawling performance. Window masks, Paint-then-peel overspray film and fully licensed detailed stickers are included to finish off the look. Raise the bar and get your own Pro-Line 2017 Ford® F150 Raptor Body for your 12.3” Crawler now! Features: Officially Licensed 2017 Ford® Raptor Body  Transform your 12.3” Crawler into an Aggressive 2017 Ford® Raptor Lightweight Single Piece Design for Better Crawling Performance Paint Then Peel Overspray Film Included Made with Crystal Clear Polycarbonate Four steps to Bash Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Included: 2017 Ford® F-150 Raptor Clear Body for 12.3” Crawler (1 pc) Decal Sheet Window Masks Paint Then Peel Overspray Film Fits: MAXX® (with Extended Body Mount kit #6370-00 sold separately) SCX10™ Vaterra Ascender Element Enduro Other 12.3" Wheelbase Crawlers Specifications: Length:   19.5" (495mm) Width:   7.25" (184mm) Height:   5.75" (146mm) Wheelbase:   12.3" (313mm)

799,-

849,-

KJØP
-6%
Hovedbilde Traxxas 8216 Shock Towers Front and Rear TRX-4
Traxxas 8216 Shock Towers Front and Rear TRX-4
Shock towers, front & rear (left & right)

99,-

KJØP
Hovedbilde Proline 356600 Cliffhanger High Performance Clear Body ... Hovedbilde Proline 356600 Cliffhanger High Performance Clear Body ...
Proline 356600 Cliffhanger High Performance Clear Body ...
Cliffhanger High Performance Clear Body for 12.3" (313mm) Wheelbase Scale Crawlers Discription: This is a Cliffhanger High Performance Clear Body for 12.3" Crawlers. Introducing the all-new Cliffhanger High Performance Rock Crawling competition body from Pro-Line that was developed specifically for 12.3" wheelbase Class 2 and Class 3 vehicles. Scale competition crawling is a growing part of the overall rock crawling movement and Pro-Line's Cliffhanger body provides everything that these competitors have been asking for. The Cliffhanger features a pinched front end and a dove-tailed rear end for maximum tire clearance while still maintaining a true-to-scale appearance. The Cliffhanger is made from a single piece of crystal-clear polycarbonate to save on weight and has a molded-in drop-down bed to make room for you to add your favorite scale accessories. Everything on the Cliffhanger body has been optimized for maximum crawling performance while still complying with the letter and spirit of the competition crawling rules. Don't get stuck behind on the rocks, get your very own Cliffhanger body today! Features: Designed Specifically for 12.3" Wheelbase Class 2 and Class 3 Comp Crawlers Pinched Front End and Dove-tailed Rear End for Max Tire Clearance Maintains True-to-Scale Appearance Made from a Single Piece of Crystal-Clear Polycarbonate Molded-in Drop Down Bed to Add your Favorite Scale Accessories Maximum Crawler Performance that Adheres to Competition Rules Paint-then-peel Overspray Film Included Four Steps to Crawl Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Decal your body (decal sheet included) 4.) Mount your new body onto your Truck Fits: SCX10™ II & III Ascender® Element Enduro Other 12.3" Wheelbase Crawlers Includes: Cliffhanger High Performance Clear Body (1 pc) Decal Sheet Window Masks Paint-then-peel Overspray Film Specs: Overall Length:   16.7" (424mm) Width at Doors:   7.0" (178mm) Width at Fenders:   6.5" (165mm) Height:   4.8" (122mm) Wheelbase:   12.3" (313mm)

599,-

649,-

KJØP
-8%
Hovedbilde Traxxas 2362 Shock Rebuild Kit
Traxxas 2362 Shock Rebuild Kit
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
Hovedbilde Traxxas 5347 Rod Ends w/Hollow Balls Large Revo (12)
Traxxas 5347 Rod Ends w/Hollow Balls Large Revo (12)
Denne finnes også i RPM her.   This is the Large Rod End Set for the Traxxas Revo. FEATURES: Plastic construction           Black in color           Metal Pivot Balls INCLUDES: 12 Rod Ends           12 Pivot Balls REQUIRES: Assembly to vehicle SPECS:    Length:              22mm (.88")           Width at ball joint: 10mm (.39")

119,-

KJØP
Hovedbilde Traxxas 8361 Shock Caps with Hollow Balls Black (4)
Traxxas 8361 Shock Caps with Hollow Balls Black (4)
Shock caps (black) (4) (assembled with hollow balls)

59,-

KJØP
Hovedbilde Bittydesign Liquid Mask 16oz (473ml)
Bittydesign Liquid Mask 16oz (473ml)
Bittydesign Liquid Mask 16oz/473ml Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found: Incredible time savings, the drawing up of liquid is really fast Possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms Less usury of the cutting blade of your precision cutter Greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing No residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen) Greater accuracy of airbrushing, with our liquid the color smear are no longer a problem Product Features: The Liquid Mask is is ready to use, you not need to dilute it It is water-based withour solvent, not harmful to health. You can safely use it even at home Dries quickly when subjected to a jet of hot air Once the package is opened, if stored properly it can last for several months With the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities Works perfect together with all our Hobbynox Airbrush Colors! Video Tutorial: Here you find 3 practical video 'Tutorial' that explains step by step how to use at best our special liquid from the preparation of the body to the drafting of the Liquid Mask and finally the multiple steps of airbrushing, all you need to know is explained in detail. Good vision!

279,-

299,-

KJØP
-7%
Hovedbilde Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Hovedbilde Tamiya 86041 PS-41 Polycarb Spray Bright Silver 3 oz
Tamiya 86041 PS-41 Polycarb Spray Bright Silver 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-41 Bright Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Traxxas 8837 Axle Housing Rear TRX-6
Traxxas 8837 Axle Housing Rear TRX-6
Axle Housing Rear TRX-6

119,-

129,-

KJØP
-8%
Hovedbilde Traxxas 8279 Ring Gear and Differential Pinion Gear ...
Traxxas 8279 Ring Gear and Differential Pinion Gear ...
Ring Gear and Differential Pinion Gear TRX-4

189,-

KJØP
Hovedbilde Traxxas 8297 Spool / Differential Housing Plug
Traxxas 8297 Spool / Differential Housing Plug
Spool/ differential housing plug/ e-clip

129,-

KJØP
Hovedbilde Traxxas 8846 Differential Cover Intermediate TRX-6
Traxxas 8846 Differential Cover Intermediate TRX-6
Differential Cover Intermediate TRX-6

49,-

KJØP
Hovedbilde Yeah Racing AXCP-008 21T 14T HD Steel Overdrive Portal ... Hovedbilde Yeah Racing AXCP-008 21T 14T HD Steel Overdrive Portal ...
Yeah Racing AXCP-008 21T 14T HD Steel Overdrive Portal ...
21T 14T HD Steel Overdrive Portal Machined Gear Set For Axial Capra SCX10 III Overdrive your Axial Capra or SCX10 III with this heavy duty machined gearset! Overdriving allows you to tranverse trails and obstacles more easily!   Features: For: Axial Capra SCX10 III  Material: Steel Color: Black    Includes: Overdrive Gears  (1 Set)

175,-

KJØP
Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...
Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Orange For 1/10 Crawler 'G6 Certified' Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to set up your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig that will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge that will prevent shock oil leakage! *Photos for reference only. Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Include: Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Note: The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination. Manual:

319,-

349,-

KJØP
-9%
Hovedbilde Traxxas 5120A Ball bearings, black rubber sealed ...
Traxxas 5120A Ball bearings, black rubber sealed ...
Ball bearings, black rubber sealed (12x18x4mm) (2)

109,-

KJØP
Hovedbilde Yeah Racing TRX4-053 Metal Rock Rails For Traxxas ... Hovedbilde Yeah Racing TRX4-053 Metal Rock Rails For Traxxas ...
Yeah Racing TRX4-053 Metal Rock Rails For Traxxas ...
Yeah Racing Metal Rock Rails For Traxxas TRX-4 Black Description: Metal Rock Rails to replace the original plastic units! Offering better protection if your rig rolls over!     Features: For: Traxxas TRX-4T Defender / Bronco Material: Metal Color: Black   Includes: Metal Rock Rails (2 pcs) Screws (8 pcs)

399,-

429,-

KJØP
-7%
Hovedbilde Tamiya 86060 PS-60 Bright Mica Red 3 oz
Tamiya 86060 PS-60 Bright Mica Red 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-60 Bright Mica Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

119,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png