Hopp til innhold

Traxxas 7056 Half Shafts Center Front/Rear VXL

Art.nr: TRX 7056

75,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Front/Rear Center Half Shafts for use on the
                 Traxxas 1/16 E-Revo and Slash VXL Vehicles.


FEATURES: Nylon construction
          Black in color


INCLUDES: One Front Center Half Shaft
          One Rear Center Half Shaft
          Four U-Joints


REQUIRES: Installation on the vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Gear set, metal (for 2070, 2075 servos) Developed for the TRX-4 RC Scale and Trail Crawler, the #2075X steering servo features all-metal gears for rugged, dependable service in extreme conditions. These same gears are now available to upgrade standard #2075 servos to the metal gear set. Upgrade your existing Slash, Summit, 4-Tec 2.0, E-Revo, or E-Maxx steering servos with this high-performance gear set. Replacing your #2075 servo gears is easier than ever with this all-inclusive kit. Installation should take about 15 minutes with only simple tools required. The included instruction sheet illustrates how the servo is constructed while the helpful installation video walks you through the process.  

249,-

På lager 1
KJØP
VAPEX LiPo-Safe Bag-D 125x64x50mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Perfect for 1/16-1/18 car batteries, 1-2s Shorty LiPo's and smaller airplane batteries Fits inside the storage Bag-E Velcro Flap Size: 125x64x50mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

89,-

På lager 15
KJØP
-11%
This is the Long Travel Rocker Arm Set for the Traxxas Summit VXL. FEATURES Plastic construction Grey in color INCLUDES Eight long travel rocker arms Eight plastic bushings REQUIREMENTS Installation on to Summit SPECIFICATIONS Distance from Mounting Hole to Arm Hole: 22mm (0.83")

59,-

På lager 3
KJØP
 This is the RPM Blue Axle Carriers for the Traxxas 1/16 scale                           E-Revo and 1/16 scale Slash. FEATURES: Blue plastic construction           Stronger pivot ball mounting   INCLUDES: One left and right axle carrier, four molded caps, eight 2x8mm             flathead screws, instructions and decals   REQUIRES: Installation following the included instructions

169,-

** Ikke på lager
KJØP
1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!    

169,-

På lager 1
KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-47 Pink/Gold)                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.                    Highly flammable.

128,-

På lager 8
KJØP
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***   NB! NB! Kun karosseri svart/blå. Til E-Revo 1/16. Note: This item is the Body only (Black/blue) for E-Revo 1/16

549,-

Ikke på lager
Ikke på lager
Traxxas 6792 - Sledgehammer Tires on 2.8" Wheels for Rustler 4x4 & Stampede 4x4 The all-new Sledgehammer tire for Rustler 4X4 (#6792) provides extreme traction and control for a variety of off-road terrain. The Sledgehammer's increased overall diameter provides additional ground clearance, while the open block tread design clears mud and debris for unmatched traction in loose surfaces. Features: Designed for Rustler 4X4 and Stampede 4X4 models Increased diameter provides additional ground clearance Extreme open block tread design clears debris for unmatched traction New wheel design provides additional strength TSM® rated Specs: Tire Diameter: 133mm Wheel Diameter: 2.8" Width: 65mm Hex: 12mm

479,-

499,-

På lager 2
KJØP
-4%
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
Ikke på lager
-9%
This is the Differential Gear Set for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: Two Output Gears           Three Spider Gears           Two Differential Output Shafts           Three 1.5x6mm Pins           Two 1.5x8mm Pins REQUIRES: Installation on the vehicle

129,-

På lager 4
KJØP
NB!! Denne her erstatter TRX 2925   Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type     Battery Material     NiMH Colour     Black Width     7.5 cm Height     16 cm Depth     2 cm Weight     152 g

299,-

319,-

På lager 1
KJØP
-6%
Yeah Racing RC Ball Bearing Set with Bearing Oil For Traxxas 1/16 Brushless Series - Slash E-Revo & Summit Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.) Specification: Ball Bearing For Traxxas 1/16 Brushless Series - Slash E-Revo & Summit Material: Metal Include: Bearing (33Pcs) Bearing Oil (15ml) #YA-0215 * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. 

239,-

På lager 1
KJØP
These are 4mm Locking Nuts from Traxxas. FEATURES: Stainless steel construction.           Nylon insert. INCLUDES: 10 Lock Nuts SPECS:    Size:  4mm                       

30,-

På lager 9
KJØP
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

På lager 6
KJØP
-12%
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

På lager 8
KJØP
-7%
These are the Front and Rear Toe Links for the                 Traxxas Grave Digger Off-Road Truck. FEATURES: Molded composite plastic construction, green in color INCLUDES: Two Front and two Rear Toe Links           Eight Hollow Metal Balls

75,-

På lager 2
KJØP
This is the Clear Body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR. FEATURES: Plastic construction Clear INCLUDES: One Clear 1/16 E-Revo Body One Window Masking Set One Decal Set REQUIRES: Polycarbonate paint of modeler's choice Installation on the vehicle SPECS:    Length: 283mm (11.1") Width: 100mm (3.9") Height: 75mm (3")       (B5)

239,-

259,-

På lager 1
KJØP
-8%
These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

På lager 4
KJØP
These are the Black Chrome Gemini Wheels for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Black in color           Black chrome spokes INCLUDES: Two Black Chrome Gemini Wheels REQUIRES: Tires           Installation on the vehicle SPECS:    Outer Diameter: 59.4mm (2.3")           Width: 38.6mm (1.5")           Hex: 12mm

109,-

119,-

På lager 2
KJØP
-8%
This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 1400mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S2P  Continuous Discharge: 25C (35A)  Max Burst Rate: 50C (70A)  Watt Hours: 15.54  Charge Rate: 1C (1.4A)  Max Charge Rate: 2C (2.8A)  Dimensions: 3.5 x 0.83 x 1.2" (89 x 21 x 30mm)  Weight: 4.2oz (118g)

469,-

489,-

På lager 4
KJØP
-4%
This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction           Grey in color INCLUDES: One 19T 48P Pinion Gear           One Set Screw REQUIRES: Installation  

39,-

Ikke på lager
Ikke på lager
This is the Tire Wheel Assembly SCT Front/Rear from Traxxas. FEATURES Mounted L & R Canyon AT tires with foams on Geode chrome, red beadlock style wheels in plastic INCLUDES Two mounted Left & Right Canyon AT tires with foams Two Geode Chrome, Red Beadlock Style Wheels REQUIREMENTS Installation SPECIFICATIONS Width: 1.73" (44mm) Diameter: 4.3" (110mm) Hex Size: 14mm

265,-

På lager 3
KJØP
This is the Center Differential Gear Set for use on the          1/10 scale Traxxas Slash 4x4 Ultimate and Platinum Editions. FEATURES: Steel construction           Replaces worn or damaged center differential gears INCLUDES: Two Output Gears           Two Spider Gears           One Spider Gear Shaft REQUIRES: Diassembly of differential

189,-

** Ikke på lager
KJØP
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

På lager 1
KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

På lager 5
KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png