Hopp til innhold

Traxxas 6738 Shock tower, rear Rustler 4x4

Art.nr: TRX 6738

79,-

Traxxas

Traxxas

På lager: 6

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Shock tower, rear Rustler 4x4

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 6739R
Copied
Shock tower, front, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)

319,-

349,-

KJØP
-9%
Art.nr: TRX 6739G
Copied
Shock tower, front, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)

319,-

349,-

KJØP
-9%
Art.nr: TRX 6738G
Copied
Shock tower, rear, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)

319,-

349,-

KJØP
-9%
Art.nr: TRX 6738R
Copied
Shock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)

319,-

349,-

KJØP
-9%

Kunder kjøpte også

Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP
Body support Rustler 4x4, 3x12mm CS (4)

89,-

KJØP
Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

149,-

KJØP
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
This is a Traxxas M0.8P, 52T Spur Gear. FEATURES: M0.8 pitch           52 tooth           Black plastic construction           Compatible with 32P pinion gears INCLUDES: One M0.8P, 52T Spur Gear SPECS:    Pitch:   M0.8           Tooth:   50           Outer Diameter: 43mm (1.69")           Inner Diameter: 11mm (0.43")

39,-

KJØP
This is a pair of Blue Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Blue firmness rating           +20% progressive compression INCLUDES: Two Blue Rate Rear Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)

59,-

KJØP
This is a Traxxas M0.8P, 50T Spur Gear. FEATURES: M0.8 pitch           50 tooth           Black plastic construction           Compatible with 32P pinion gears INCLUDES: One M0.8P, 50T Spur Gear SPECS:    Pitch:   M0.8           Tooth:   50           Outer Diameter: 41.5mm (1.63")           Inner Diameter: 11mm (0.43")

39,-

KJØP
This is an optional Bearing Adapter for the Slash 4X4. FEATURES: 6061-T6 anodized blue aluminum construction           Steel 10x15x4mm ball bearing with blue rubber seal           Used on slipper shaft INCLUDES: One aluminum adapter           One 10x15x4mm ball bearing REQUIRES: Installation on to slipper shaft           Remaining clutch pieces

69,-

KJØP
This is a pair of Pink Rate Rear Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Pink firmness rating           +10% progressive compression INCLUDES: Two Pink Rate Rear Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)  

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 450. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Chassis (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down)

239,-

KJØP
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

Ikke på lager
-9%
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Red Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

KJØP
-12%
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction           Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS:    Inner Diameter: 10mm           Outer Diameter: 15mm           Side Thickness:  4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed).   Tamiya  630    3X6X2.5mm Tamiya  730    3X7X3mm Tamiya  840    4X8X3mm Tamiya  850    5X8X2.5mm Tamiya 1050    5X10X4mm Tamiya 1060    6X10X3mm Tamiya 1150    5X11X4mm Tamiya 1260    6X12X4mm Tamiya 1280    8X12X3.5mm Tamiya 1480    8x14x4mm ??? Tamiya 1510    10X15X4mm Tamiya 1680    8X16X5mm

89,-

99,-

KJØP
-10%
This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power           Optimized for 1/10th scale vehicles           Ultra high temp sintered neodymium motor magnets           12-gauge motor wire with gold-plated bullet connectors           Efficient, high-speed ball bearings           Consistent, high-power output           Precision-balanced rotor           Solder tabs with protective end caps           Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS:    Type: Sensorless Brushless           RPM/volt: 3500 (10-turn)           Wire size: 12-gauge Maxx Cable           Max RMP: 50,000           Weight: 9.24 oz (262g)           Current Ratings: 65A constant / 100A peak/burst           Magnet type: Ultra High-Temp. Sintered Neodymium           Connection type: Solder tab / TRX 3.5mm Bullet

1.195,-

1.295,-

KJØP
-8%
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

KJØP
-12%
Wing, Rustler 4X4 (red)/ 3x8 FCS (3)

69,-

KJØP
Traxxas 6792 - Sledgehammer Tires on 2.8" Wheels for Rustler 4x4 & Stampede 4x4 The all-new Sledgehammer tire for Rustler 4X4 (#6792) provides extreme traction and control for a variety of off-road terrain. The Sledgehammer's increased overall diameter provides additional ground clearance, while the open block tread design clears mud and debris for unmatched traction in loose surfaces. Features: Designed for Rustler 4X4 and Stampede 4X4 models Increased diameter provides additional ground clearance Extreme open block tread design clears debris for unmatched traction New wheel design provides additional strength TSM® rated Specs: Tire Diameter: 133mm Wheel Diameter: 2.8" Width: 65mm Hex: 12mm

479,-

499,-

KJØP
-4%
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

KJØP
-11%
Bellcrank bushings (plastic) (5x8x2.5mm) (4)

39,-

KJØP
This is the 32P 50T Spur Gear for the Slash 4x4 from Traxxas. FEATURES: Black plastic construction INCLUDES: 32P 50T Spur Gear for the Slash 4x4 REQUIRES: Installation in center differential SPECS:    Pitch: 32P           Teeth: 50T

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png