Hopp til innhold

Traxxas 5137 Differential Oil 50K Weight Revo

Art.nr: TRX 5137

89,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is 50K wt Differential Oil for the Traxxas Revo
                  but can be used in other vehicles as well.


FEATURES: 50K weight oil


INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5136X
Copied
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP

Kunder kjøpte også

Traxxas 6444 Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Traxxas 6494R Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

149,-

159,-

KJØP
-6%
Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)

69,-

KJØP
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2)  

95,-

KJØP
Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

129,-

139,-

KJØP
-7%
This is the 14 Tooth 1.0 Metric Pitch Pinion Gear                 for the Traxxas XO-1 On-Road Car FEATURES: Hardened steel construction           Fits 5mm diameter motor shafts INCLUDES: 14 Tooth 1.0 Metric Pitch Pinion Gear

49,-

KJØP
This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR (TRAC07**). FEATURES: Nylon construction           Installed foam pads           Grey in color           Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor             modification INCLUDES: One Chassis with foam pads           Instruction sheet for use with E-Revo Brushless and Summit REQUIRES: Installation of all other components SPECS:    Length: 434mm (17")           Width: 150mm (5.9")           Height: 38mm (1.5")

329,-

KJØP
These are the replacement Drive Shaft Boots for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Rubber Construction           Blue in Color INCLUDES: Two Blue Rubber Driveshaft Boots REQUIRES: Assembly onto Vehicle  

29,-

39,-

KJØP
-26%
Body clip retainer, blue (4)

39,-

KJØP
Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit) Made from hardened steel, the Extreme Heavy-Duty Suspension Pin Set upgrades the screw pins in the Extreme Heavy Duty Upgrade Kit and locks them in place with locknuts. (Pins are not compatible with stock suspension parts) Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

189,-

KJØP
Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle. *Weight comparison based on Traxxas #3655X.

159,-

Ikke på lager
Body Mount Rear Sledge

199,-

KJØP
Traxxas 9549 Toe Links Front (2) Sledge Toe links, front (2) (assembled with hollow balls)

99,-

KJØP
Kyosho 96504 Differential Gear Grease Kyosho #15000 CPS (15g)

139,-

KJØP
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

549,-

KJØP
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Gearbox halves (front & rear)/ idler gear shaft

95,-

KJØP
These are 3x5mm Backplate screws for the Traxxas 2.5 Engine. FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on coverplate. SPECS:    Length: 5mm           Diameter: 3mm COMMENTS: These may also be referred to as coverplate screws.

35,-

KJØP
These are the Hollow Balls for use on the                Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Twenty Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 4.5mm (0.18")           Length: 5mm (0.20")

49,-

KJØP
 This is the RPM Blue Axle Carriers for the Traxxas 1/16 scale                           E-Revo and 1/16 scale Slash. FEATURES: Blue plastic construction           Stronger pivot ball mounting   INCLUDES: One left and right axle carrier, four molded caps, eight 2x8mm             flathead screws, instructions and decals   REQUIRES: Installation following the included instructions

169,-

KJØP
  Input Shaft/ Idler Gear

119,-

KJØP
Seal Kit Receiver Box (#9624) Sledge   Seal kit, receiver box (includes o-ring, seals, and silicone grease)

49,-

KJØP
Traxxas 9629G Tie bars, front, 7075-T6 aluminum (green-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® front tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
Traxxas 9630G Tie bars, rear, 7075-T6 aluminum (green-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® rear tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png