Traxxas

Traxxas 5103A Ball bearings, black rubber sealed (7x14x5mm) (2)

Art.nr: TRX 5103A

55,-

Traxxas

Traxxas

På lager: 5

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Ball bearings, black rubber sealed (7x14x5mm) (2)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 10780 Differential Complete Front/Rear Mini ...

Traxxas 10780 Differential Complete Front/Rear Mini ...

Utgått fra Traxxas. Erstattet med følgende vare: 10780X Traxxas 10780 - Differential assembly (bevel gear), front or rear, complete (fits Mini Maxx®)

399,-

Hovedbilde Traxxas 10719 Ball bearing 7x14x3.5mm Black Rubber ...

Traxxas 10719 Ball bearing 7x14x3.5mm Black Rubber ...

Traxxas 10719 Ball bearing 7x14x3.5mm Black Rubber Sealed (2)

55,-

Hovedbilde Traxxas 10762 Pinion gear, differential (12/47 ratio) ...

Traxxas 10762 Pinion gear, differential (12/47 ratio) ...

Traxxas 10762 - Pinion gear, differential (12/47 ratio) (rear) (requires #10757 with either #10758 or 10760) Pinion Gear Diff Rear (Requires Center Diff/Slipper Clutch) Mini Maxx

79,-

Hovedbilde Traxxas 10758 Slipper clutch, complete (fits Mini ...

Traxxas 10758 Slipper clutch, complete (fits Mini ...

Traxxas 10758 - Slipper clutch, complete (fits Mini Maxx®) (requires #10757 & 10762) The Mini Maxx® slipper clutch comes completely assembled and ready to install in your truck with an included 47-tooth spur gear. When installing the slipper clutch, you must replace the standard driveshaft with a shorter 10757-series driveshaft and add the 10762 differential pinion gear.

269,-

289,-

-7%

Hovedbilde Traxxas 10757 Driveshaft Center (Requires Opt Center ...

Traxxas 10757 Driveshaft Center (Requires Opt Center ...

Traxxas 10757 - Driveshaft, center, plastic (requires #10762 with either #10758 or 10760) Use this short driveshaft when installing the optional 10758 slipper clutch or 10760 and 10760R center differentials. When using the short driveshaft, you must also use differential pinion gear 10762.

59,-

Hovedbilde Fuse Overgang - Male Traxxas til Female XT60

Fuse Overgang - Male Traxxas til Female XT60

Fuse Overgang - Male Traxxas til Female XT60

95,-

Hovedbilde Traxxas 2577X Screws, 3x10 button-head machine (hex ...

Traxxas 2577X Screws, 3x10 button-head machine (hex ...

Screws, 3x10 button-head machine (hex drive) (stainless steel) (6)

39,-

Hovedbilde Traxxas 8252 Portal Drive Housing Inner Front ...

Traxxas 8252 Portal Drive Housing Inner Front ...

Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6)

65,-

Hovedbilde Traxxas 3229 Head Screw 2.5x10mm

Traxxas 3229 Head Screw 2.5x10mm

These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

Hovedbilde Traxxas 6745 Gear 32P 9T

Traxxas 6745 Gear 32P 9T

This is a 9 Tooth 32 Pitch Pinion Gear for the Traxxas. FEATURES: Machined Steel Designed for a 3mm shaft INCLUDES: One 9 tooth Pinion Gear One 3 x 4mm Set Screw

45,-

55,-

-18%

Hovedbilde Traxxas 8053 Spur gear 45T TRX-4

Traxxas 8053 Spur gear 45T TRX-4

Spur gear, 45-tooth (TRX-4)

39,-

Hovedbilde Traxxas 5117A Ball bearings, black rubber sealed ...

Traxxas 5117A Ball bearings, black rubber sealed ...

Disse lagerene er samme størrelse som Tamiya 1260 Ball bearings, black rubber sealed (6x12x4mm) (2)

55,-

Hovedbilde Traxxas 8258 Portal Drive Output Gear Front/Rear TRX-4

Traxxas 8258 Portal Drive Output Gear Front/Rear TRX-4

Portal Drive Output Gear Front/Rear TRX-4

65,-

Hovedbilde Traxxas 8297 Spool / Differential Housing Plug

Traxxas 8297 Spool / Differential Housing Plug

Spool/ differential housing plug/ e-clip

129,-

Hovedbilde Traxxas 1647 Silicon Grease

Traxxas 1647 Silicon Grease

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Hovedbilde Traxxas 8257 Portal Drive Input Gear Front TRX-4

Traxxas 8257 Portal Drive Input Gear Front TRX-4

Portal Drive Input Gear Front TRX-4

109,-

Hovedbilde Pro-Line 617400 1.9

Pro-Line 617400 1.9" Dual Stage Closed Cell Foam ...

This is a pair of Pro-Line 1.9" Dual Stage Foam Inserts for Pro-Line 1.9" XL Tires. FEATURES Fits the following Pro-Line tires; #1197-14 Interco TSL SX Super Swamper 1.9" #10112-00 Flat Iron XL 1.9" #10118-14 BF Goodrich T/A KR2 1.9" #10128-14 Hyrax 1.9" Lightweight and waterproof blue closed cell inner foam construction Outer made from soft open cell foam that provides maximum grip while maintaining a fully supported sidewall for greater side hilling performance INCLUDES Two Pro-Line 1.9" Dual Stage Foam Inserts in Blue and White SPECIFICATIONS Diameter: 4.15" (120mm) Width: 1.60" (41mm) Outer Thickness: 0.75" (19mm)

269,-

299,-

-10%

Hovedbilde Yeah Racing YB6048B/S10 RC PTFE Bearing 15x21x4mm ...

Yeah Racing YB6048B/S10 RC PTFE Bearing 15x21x4mm ...

Yeah Racing RC PTFE Bearing 15x21x4mm 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing RC PTFE Bearing (5x10x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

129,-

Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm

Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm

Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm

VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

-11%

Hovedbilde Yeah Racing YB6014M/S10 RC Ball Bearing (5x11x4mm) ...

Hovedbilde Yeah Racing YB6014M/S10 RC Ball Bearing (5x11x4mm) ...

Yeah Racing YB6014M/S10 RC Ball Bearing (5x11x4mm) ...

Yeah Racing RC Ball Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specifications: Yeah Racing (#YB6014MS/10) RC Ball Bearing (5x11x4mm) Material: Metal Includes: Bearing (10Pcs) Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

-10%

Hovedbilde Dusty Motors 1015 XL Universal Adjustable Protection ...

Dusty Motors 1015 XL Universal Adjustable Protection ...

Passer veldig bra på Traxxas Sledge. Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 36 centimeters or 14.2 inches Length: 36 centimeters or 14.2 inches

399,-

Hovedbilde Traxxas 5120A Ball bearings, black rubber sealed ...

Traxxas 5120A Ball bearings, black rubber sealed ...

Ball bearings, black rubber sealed (12x18x4mm) (2)

109,-

Hovedbilde Traxxas 8229 Axle Shaft Set Front Right TRX-4

Traxxas 8229 Axle Shaft Set Front Right TRX-4

Axle Shaft Set Front Right TRX-4

129,-

Hovedbilde Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)

Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)

Yeah Racing RC PTFE Bearing (12x18x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6026BS/10) RC Telfon Bearing (12x18x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

139,-

-14%

Hovedbilde Yeah Racing YB6017B/S10 RC PTFE Bearing (6x13x5mm) ...

Yeah Racing YB6017B/S10 RC PTFE Bearing (6x13x5mm) ...

Yeah Racing RC PTFE Bearing (6x13x5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specifications: Yeah Racing (#YB6017BS/10) RC Telfon Bearing (6x13x5mm) Material: Metal Includes: Bearing (10Pcs) Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

-10%