Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / E-revo 1/16 VXL 71076-8 / Traxxas 6507R 4-Channel TQi TSM Radio System w/Bluetooth Mod
-9%

Traxxas 6507R 4-Channel TQi TSM Radio System w/Bluetooth Mod

Art.nr: TRX 6507R

2.095,-

2.295,-

- 9%
Traxxas

Traxxas
Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Traxxas TQi 4-Channel 2.4GHz Transmitter with 5-Channel Receiver,
TSM* (Traxxas Stability Management) and Traxxas Bluetooth Module.
Servos Not Included.

FEATURES

Traxxas Stability Management (TSM): Superior tuning algorithms run on
high-speed electronic components to control wheel spin and steering
direction on loose dirt, concrete and even ice and snow. TSM can be
fine tuned from 0-100%, or turned off by adjusting the multi-
function knob on the TQi transmitter
Can be equipped with the TQi Docking Base along with the iPhone,
iPad or iPod touch* to create a graphical user interface for the
vehicle
Simple two-button programming interface
Automatic model recognition recalls settings for up to 30 Traxxas
Link enabled models
Adjustable throttle and steering endpoints
Five channel receiver with three telemetry ports
Internal antenna
High 13ms frame rate and near zero latency for responsive control
Built-in failsafe returns throttle to last saved neutral position
Multi-Function knob can be programmed to control Steering Sensitivity
Throttle Sensitivity, Steering Percentage, Braking Percentage, or
Throttle Trim

INCLUDES

Traxxas TQi 4-Channel 2.4GHz Transmitter
Bluetooth Module, TRX 6511
5-Channel TSM Receiver, TRX 6533

REQUIREMENTS

AA Batteries: Four for transmitter
Servos of modeler's choice

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2916 100 Watt USB-C Power Cable
Traxxas 2916 100 Watt USB-C Power Cable
Traxxas 2916 - 100 Watt USB-C Power Cable Take advantage of the full USB-C standard with the Traxxas 100-watt USB-C power cable. Not all USB-C cables are created equal. When combined with the 2912 Traxxas 45-watt power supply, the Traxxas USB-C power cable is guaranteed to maximize output for fast, reliable charging. Power Cable Features:­ 5 amp, 100 watt capable Braided sleeve Anodized aluminum plugs with plastic overgrip 1.5 m long Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Rustler® Slash® Stampede®

79,-

KJØP
Hovedbilde Traxxas 2912 45 Watt USB-C Power Adapter Hovedbilde Traxxas 2912 45 Watt USB-C Power Adapter
Traxxas 2912 45 Watt USB-C Power Adapter
Traxxas 2912 - 45 Watt USB-C Power Adapter Take advantage of the full USB-C standard with the Traxxas USB-C 45-watt power adapter. Not all power adapters are created equal. When combined with the 2916 Traxxas 100-watt USB-C cable, the Traxxas 45-watt power adapter is guaranteed to maximize output for fast, reliable charging. Power Adapter Features:­ 45 watt output Single USB-C port 39 x 39 x 47 mm Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bandit® Rustler® Slash® Stampede®

269,-

KJØP
Hovedbilde Traxxas 6541X Power Tap TRX-JST for Light Set
Traxxas 6541X Power Tap TRX-JST for Light Set
Connector, power tap (with cable)/ 2.6x8 BCS (2)   (use #6549 power tap for telemetry voltage)

69,-

KJØP
Hovedbilde Traxxas 2237 Antenna TQ Transmitter 2.4GHz
Traxxas 2237 Antenna TQ Transmitter 2.4GHz
This is a replacement Traxxas Transmitter Antenna, and is intended for use with the Traxxas 2.4GHz TQ Transmitter.

69,-

Ikke på lager
Hovedbilde Traxxas 6780A Differential Center Complete Hoss Hovedbilde Traxxas 6780A Differential Center Complete Hoss
Traxxas 6780A Differential Center Complete Hoss
Traxxas Center differential, complete (fits Hoss™ 4X4 VXL) The Pro-Built center differential absorbs driveline shocks to improve durability and distributes power to all four wheels for mind-bending acceleration. A 54-tooth, 32-pitch steel spur gear provides maximum durability. The sealed differential comes completely assembled and ready to install with with silicone oil to help prevent unloading and ballooning of the front tires. Center differential requires 32-pitch pinion gear. Accessory part for these models: Hoss® 4X4 VXL

699,-

739,-

KJØP
-5%
Hovedbilde Traxxas 8043 Springs natural finish gts 0.30 white (2)
Traxxas 8043 Springs natural finish gts 0.30 white (2)
Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)

75,-

KJØP
Hovedbilde Traxxas 6542 Flywheel 35mm with Sensor Magnet
Traxxas 6542 Flywheel 35mm with Sensor Magnet
Flywheel 35mm with Sensor Magnet

99,-

KJØP
Hovedbilde Traxxas 6556 Mount Telemetry Expander ...
Traxxas 6556 Mount Telemetry Expander ...
Mount, telemetry expander (fits XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4) (*requires rear chassis brace #5632)

115,-

KJØP
Hovedbilde Traxxas 6536 Mounts RPM Sensor 3x10mm CS (2)
Traxxas 6536 Mounts RPM Sensor 3x10mm CS (2)
These are the Mounts for the Traxxas RPM Sensor           (Nitro Engines) and 3x10 CS with Split and Flat Washers (2) FEATURES: Plastic and metal construction INCLUDES: Three different plastic mounts           Two plastic spacers           Two flat washers           Two split washers           Two hex socket screws COMMENTS: These mounts can be used with              Traxxas Sensor RPM Long 3x4mm BCS XO-1 (2)              Traxxas Sensor RPM Short 3x4mm BCS (2)

45,-

KJØP
Hovedbilde Tamiya 54476 Ball Bearing Set TT-02
Tamiya 54476 Ball Bearing Set TT-02
This ball bearing set is designed to be used for the TT-02 chassis platform. It replaces all plastic bushings with ball bearings resulting in a more efficient drive-train enabling faster speeds and higher durability. Can be used in conjunction with the new TT-02 chassis. 1050 Ball bearings x8 1150 Ball bearings x4 1280 Ball bearings x4  

289,-

299,-

KJØP
-3%
Hovedbilde Traxxas 3437 Hobbyknife with 5-pack Blades Hovedbilde Traxxas 3437 Hobbyknife with 5-pack Blades
Traxxas 3437 Hobbyknife with 5-pack Blades
Traxxas Precision Hobby Knife A quality hobby knife is an essential tool for any RC hobbyist's workbench. The new Traxxas Precision Hobby Knife is built as tough as our models for years of use, featuring a high quality aluminum handle and carbon steel blades. From applying decals to trimming polycarbonate bodies, this knife will be among your most useful tools. Each hobby knife set includes a slip-resistant knurled aluminum handle. Designed to securely hold a variety of industry standard blades, the handle is finished with an engraved Traxxas logo.

89,-

KJØP
Hovedbilde M-DRIVE - Body Scissor Set - Straight & Big Curve
M-DRIVE - Body Scissor Set - Straight & Big Curve
M-DRIVE - Body Scissor Set - Straight & Big Curve High quality set including two scissors suitable for cutting Lexan bodies and more. One scissor has a straight cutting shank and the other a curved shank (for cutting non straight lines). Specs: Handle: Black plastic Size: 10 x 65 x 140mm Laser Engraving: M-DRIVE logo on steel shank Cutting Shank Length: 24mm Suitable for: Cutting Lexan bodyshells, most non-reinforced plastics (up to 1.5mm thick), cardboard & paper

99,-

KJØP
Hovedbilde Tamiya 58691 RC 1998 Ford Escort CUSTOM no esc Hovedbilde Tamiya 58691 RC 1998 Ford Escort CUSTOM no esc
Tamiya 58691 RC 1998 Ford Escort CUSTOM no esc
RC 1998 FORD ESCORT CUSTOM Description: This is a special custom (street spec) version of the 1998 Ford Escort. The body depicts the Ford Escort as a customized street version of the WRC car, and is based upon the TT-02 chassis. The actual car was powered by an inline-4 2-liter engine offering 300PS and 50Kgm of torque. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. • 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm thick polycarbonate body. • Dish-type wheels are molded in white ABS plastic, and paired with treaded tires. • Stickers and window painting masking stickers for use in the paint process included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. • Includes 540-brushed type motor. • No Esc • Requires: 2-channel radio,esc, steering servo, 7.2-7.4volt battery pack and compatible charger, and Tamiya PS polycarbonate paint. Specification: Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type TT-02 Construction Type Assembly Kit Differential Type Gear Drive Type 4WD No Esc Motor 540-brushed type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction type Suspension Fully Independent Double Wishbone Terrain Use On-Road

1.495,-

1.695,-

KJØP
-12%
Hovedbilde Tamiya 58699 1/10 RC 1992 Audi V8 Touring (TT-02 ... Hovedbilde Tamiya 58699 1/10 RC 1992 Audi V8 Touring (TT-02 ...
Tamiya 58699 1/10 RC 1992 Audi V8 Touring (TT-02 ...
Tamiya 58699 1/10 RC 1992 Audi V8 Touring (TT-02 Chassis) This Tamiya R/C kit recreates the classic 1992 Audi V8 Touring from 1992. We have faithfully recreated this classic racing car with a detailed polycarbonate body and mated it with our entry-level and user-friendly TT-02 chassis. About the Audi V8 Touring: The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Adaptable TT-02 Chassis offers balanced shaft driven 4WD The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. • 1/10 R/C model assembly kit. Length: 463mm, width: 188mm, height: 138mm. Wheelbase: 257mm. • Polycarbonate (clear) body. • Stickers are included to recreate the markings for the 1992 Audi V8 Touring. Window masking stickers included to aid in the paint job process. • Two-piece mesh wheels have silver color rims and spokes. They are paired with racing slick tires. • Separate parts are included to depict side mirrors. • A wealth of Hop-Up Option parts is available to tune the TT-02 chassis to your performance needs. The headlamp is realistically reproduced by combining a polycarbonate light case and a sticker. The small square mirror with separate parts is exclusively for Audi. As with the headlamps, the tail lights are also equipped with a polycarbonate light case to create a sense of depth. The silver-colored mesh design wheel is a two-piece type with a delicate finish. The steering system that demonstrates smooth movement uses a resin ball link at the joint. A wheel hub inspired by the brake discs of a slit rotor. A removable cooling duct is also available for the motor cover. The photo shows the duct removed. Double wishbone type rear suspension equipped with friction dampers. Requires: 2-channel radio steering servo 7.2-7.4volt battery compatible charger Tamiya PS paint. ESC SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type TT-02 Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction type Suspension Fully Independent Double Wishbone Terrain Use On-Road

1.695,-

1.895,-

KJØP
-11%
Hovedbilde Tamiya 86063 PS-63 BRIGHT GUN METAL
Tamiya 86063 PS-63 BRIGHT GUN METAL
Tamiya PS-63 PS-63 BRIGHT GUN METAL These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.

119,-

KJØP
Hovedbilde Traxxas 3382 BL-2s Power System Hovedbilde Traxxas 3382 BL-2s Power System
Traxxas 3382 BL-2s Power System
Traxxas 3382 - BL-2s™ Brushless Power System - Fast, Affordable, Fun! The BL-2s™ brushless power system delivers more speed, faster acceleration, and virtually maintenance-free operation at an affordable price. Drivers experience smooth, effortless power with added punch for tire-shredding burnouts and blazing fast speed. Optimized for 7-cell NiMH and 2s LiPo batteries, the BL-2s delivers all-day fun, battery after battery. BL-2s Brushless Electronic Speed Control The waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and convenience features you expect from Traxxas. Built-in low-voltage detection, thermal shutdown protection, and EZ-Set® one button programming make BL-2s reliable and easy to operate. BL-2s ESC Features: ­Fully waterproof Built-in two-stage low voltage detection for lithium polymer (LiPo) batteries NiMH battery packs 6-7 cells (7.2 - 8.4 V) or 2-cell LiPo battery packs (7.4 V) Patented Training Mode™ reduces the power output by 50% for new or younger drivers. When they're ready, simply change profiles to unleash full-throttle action. EZ-Set® one-button setup operates and programs just like other Traxxas speed controls Multi-color status LED Two-stage thermal shutdown protection protects the BL-2s from overheating Large aluminum heatsink dissipates heat Built-in auxiliary fan output Keyed motor connector Three programmable drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode™– 50% Fwd / Brake / 50% Rev BL-2s Brushless Motor The sensorless BL-2s 3300 kV motor delivers the all-day speed and torque you expect from brushless technology, without the high price tag. With no brushes to wear out, the BL-2s is long-lasting and virtually maintenance free. Low-friction ball bearings and an integrated cooling fan open the door to all-day fun. BL-2s Brushless Motor Features:: Integrated cooling fan Low-maintenance design High-speed ball bearings 3300 kV Integrated Cooling Fan With no brushes to wear out, the BL-2s brushless motor delivers long-term fun with very low maintenance. An integrated fan pulls cooling air through the motor for all-day running without slowing down. Quick Connect Motor Plug The Traxxas Quick Connect Motor Plug delivers free-flowing power from the ESC to the motor. The specially-keyed design aligns the plug in the correct orientation every time. BL-2s WATERPROOF ESC SPECIFICATIONS Input Voltage: NiMH 6-7 cells (7.2 to 8.4 volts) or LiPo 2 cell (7.4 volts) Case Size: W39 x D59 x H31mm Weight: 87 grams Reverse Delay: Yes, with lockout BEC Voltage: 6.0 volts BEC Current: 3 amps Input Wire: 14 gauge Motor Connectors: Quick Connect Motor Plug Input Harness Wire: 26 gauge Low Voltage Detection: 2-stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Single-Button Setup: Traxxas EZ-Set® Battery Input Connector : Traxxas High-Current Connector Motor Types: Brushless Accessory Port: Auxiliary fan Profile selection: Sport Mode: 100% Fwd, 100% Brake, 100% Rev Race Mode: 100% Fwd, 100% Brake, No Rev Training Mode:* 50% Fwd, 100% Brake, 50% Rev *Patented BL-2s BRUSHLESS MOTOR SPECIFICATIONS Type: Sensorless brushless kV: 3300 Wire Size: 16 gauge Cooling: Integrated cooling fan Motor Length: 57mm Can Diameter: 37mm Weight: 201gr Replacement part for these models: Rustler® 4X4 Brushless Slash® 4X4 Brushless Stampede® 4X4 Brushless Slash® 2WD Brushless

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Traxxas 2991 2S Battery/Dual iD Charger Completer Pack
Traxxas 2991 2S Battery/Dual iD Charger Completer Pack
Battery/charger completer pack (includes #2972 Dual iD charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo battery (2))

2.995,-

3.495,-

KJØP
-14%
Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg
Savox SC-0252MG PLUS - 0.19speed/10.5kg
Savöx Digital Servo SC-0252MG   4.8V Speed: 0.23 6.0V Speed: 0.19 4.8V Torque: 7.2 kg-cm 6.0V Torque: 10.5 kg-cm Dimensions: 40.7 x 19.6 x 39.4mm Weight: 49 gram Gear: Metal Ballbearing: 2

399,-

439,-

KJØP
-9%
Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Tamiya 86041 PS-41 Polycarb Spray Bright Silver 3 oz
Tamiya 86041 PS-41 Polycarb Spray Bright Silver 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-41 Bright Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 8576X Differential Complete Rear Alu Pro-Built ...
Traxxas 8576X Differential Complete Rear Alu Pro-Built ...
Differential Complete Rear Alu Pro-Built UDR Differential, rear, aluminum carrier (fully assembled) Upgrade your Unlimited Desert Racer® with the heavy-duty Pro-Built® rear differential with aluminum carrier. The aluminum housing adds extra strength and heat dissipation for extreme conditions. The differential comes completely assembled and ready to install into your Unlimited Desert Racer with new bearings.

949,-

1.049,-

KJØP
-10%
Hovedbilde Traxxas 8571 Differential Center Pro-Built UDR Hovedbilde Traxxas 8571 Differential Center Pro-Built UDR
Traxxas 8571 Differential Center Pro-Built UDR
Traxxas 8571 - Pro-Built UDR Center Differential Center differential, complete (fits Unlimited Desert Racer®) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Unlimited Desert Racer®

639,-

KJØP
Hovedbilde Traxxas 8572 Differential Front Pro-Built UDR
Traxxas 8572 Differential Front Pro-Built UDR
Traxxas 8572 - Pro-Built UDR Front Differential Front differential, complete (fits Unlimited Desert Racer®) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Unlimited Desert Racer®

749,-

KJØP
Hovedbilde M-Drive Bag 5 - Cars/Trucks - L810 x W575 x H360mm Hovedbilde M-Drive Bag 5 - Cars/Trucks - L810 x W575 x H360mm
M-Drive Bag 5 - Cars/Trucks - L810 x W575 x H360mm
M-Drive RC Bag 5 - Cars (XL) This 81 x 57.5 x 36cm black RC Vehicle bag from M-Drive is a lightweight case designed to safely store, transport & protect your 1/8 scale truck & monster truck and it's transmitter/charger. Material Weather resistant, heavy-duty 600-denier nylon shell that can be cleaned with mild soap and a moist cleaning cloth. 1/8 Scale Trucks & Monster Trucks The RC Bag 5 is a practical soft and lightweight bag that can store most 1/8 scale (and larger) radio controlled trucks & monster trucks such as Traxxas Revo, E-Revo, Summit, T-Maxx, Unlimited Desert Racer (UDR), XO-1 & Sledge. It even fits the Traxxas X-Maxx if you don't use the internal dividers! RC Garage Storage This RC Car Bag is a practical storage place in your home when you’re not in using it. The perfect RC Garage Storage solution! Weather Resistant A heavy-duty 600D nylon shell shields your RC equipment from moisture and dust. Shoulder Strap The removable, easily adjustable shoulder strap includes a cushioned shoulder pad for comfort. Side Handles Heavy-duty rubber grip side handles add lifting and carrying options. Removeable Divider The internal dividers are removeable and lets you store your vehicle transmitter, charger, a few extra batteries and spare tires etc. Inside Size: Length: 81cm Width: 57.5cm Height: 36cm Inside Size With Dividers: Main area: 71.5 x 48 x 36cm Secondary area 1: 71.5 x 8.5 x 36cm Secondary area 2: 57.5 x 8.5 x 36cm

1.399,-

1.499,-

KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png