Hopp til innhold

Traxxas 3991X Gearbox Halves Front/Rear E-Maxx

Art.nr: TRX 3991X

125,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the replacement Gearbox Halves for the Traxxas E-Maxx Truck.


FEATURES: Black plastic construction


INCLUDES: Gearbox halves (front and rear) and screws


REQUIRES: Remainder of the gearbox contents


SPECS:    Length: 2.67 (68mm) (at widest point)
          Width: 3.42" (87mm) (at widest point)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES: Replaces worn diff carriers gaskets and spacers INCLUDES: Diff Carrier and Gaskets, TRX 5381.           Steel Spider Gear Braces (not used with Revo)           Instruction sheet REQUIRES: Disassembly of differential, installing new parts and refilling with             modeler's choice of diff lube           10K TRX 5135                50K  TRX 5137           30K TRX 5136   stock weight       Complete set TRX 5136X

49,-

På lager 6
KJØP
Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction           Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS:    Inner Diameter: 10mm           Outer Diameter: 15mm           Side Thickness:  4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed).   Tamiya  630    3X6X2.5mm Tamiya  730    3X7X3mm Tamiya  840    4X8X3mm Tamiya  850    5X8X2.5mm Tamiya 1050    5X10X4mm Tamiya 1060    6X10X3mm Tamiya 1150    5X11X4mm Tamiya 1260    6X12X4mm Tamiya 1280    8X12X3.5mm Tamiya 1480    8x14x4mm ??? Tamiya 1510    10X15X4mm Tamiya 1680    8X16X5mm

89,-

99,-

Ikke på lager
Ikke på lager
-10%
These are the replacement Differential Bearings for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Construction           Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle SPECS:    Inner Diameter:  8mm (0.31")           Outer Diameter: 16mm (0.62")           Thickness:       5mm (0.19")

79,-

På lager 3
KJØP
This is the RPM ESC Cage for the Traxxas E-Maxx, E-Revo and Summit.     FEATURES Fits the Traxxas #3377 MXL-6S ESC, Castle Creations Mamba Monster 2  and Mamba Monster X  Separate On/Off switch mount bolts to cage in one of two locations  for extra versatility  Encases ESC only, leaving fan free for easy removal  Molded from a blend of engineering grade nylons   INCLUDES ESC Cage with Mounting Hardware and Instructions   COMMENTS Not tested to fit the original version of the Mamba Monster ESC

159,-

På lager 1
KJØP
 This is a package of 8mm Female and Male Bullet Connectors                             from Castle Creations. FEATURES: Sized for stranded wire sizes from 13 to 8 gauge Handles up to 300A current INCLUDES: Three Male and three Female Bullet Connectors REQUIRES: Soldering wires to connectors SPECS: Diameter: 0.31" (8mm) Length: 0.59" (15mm)

199,-

219,-

** Ikke på lager
KJØP
-9%
 This is a Pair of the Aluminum Bellcrank Posts for the          Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.       These bellcrank posts hold the steering bellcranks to the chassis.          The link connects the steering bellcrank to the servo saver. FEATURES: Stock aluminum steering bellcranks.           Steering link is steel and rods ends are plastic. INCLUDES: Two bellcrank posts           One 3x25mm steering link threaded rod with rod ends REQUIRES: Placing bellcranks on posts and attaching posts to chassis.           Attaching steering link to bellcrank and servo saver.

89,-

På lager 1
KJØP
          This is the Output Gear 33T for the Traxxas E-Maxx Truck. FEATURES: Black nylon construction INCLUDES: One 33T output gear           Two spacers REQUIRES: Silicone Grease SPECS:    Outer diameter: 1.37" (35mm)           Thickness: 1.02" (26mm)

45,-

På lager 2
KJØP
This is the optional .8 Metric Pitch 68 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 68T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.16" (55mm)           Thickness: .23" (6mm)

39,-

På lager 2
KJØP
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

På lager 1
KJØP
This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.                  These are part of the slipper assembly. FEATURES: Aluminum construction INCLUDES: One slipper pressure plate           One slipper hub REQUIRES: Installation onto vehicle.

99,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
This is the optional .8 Metric Pitch 65 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 65T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.12" (54mm)           Thickness: .23" (6mm)

39,-

Ikke på lager
Ikke på lager
This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  12mm (.63")           Threaded Length: 11mm (.45")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Ikke på lager
Ikke på lager
This is the Motor Cooling Blower Fan and Shroud from Castle Creations. Features: Fits motors with outside diameter between 1-1/2 and 1-7/8" (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650 Plugs into receiver and drops motor temperature as much as 30°

269,-

På lager 10
KJØP
Disse lagerene er samme størrelse som Tamiya 1260 This is a 6X12x4mm Ball Bearing Set from Traxxas. FEATURES: Steel construction           Blue rubber dirt shields INCLUDES: (2) ball bearings, Part #5117 SPECS:    Inside diameter:      6mm           Outside diameter:    12mm           Width:                4mm COMMENTS: This bearing set is used in the transmission and differentials of             the Revo.  

55,-

På lager 6
KJØP
    This is the Transmission Output Shaft for the Traxxas E-Maxx. FEATURES: Metal construction, black in color INCLUDES: One transmission output shaft, Part #5369 REQUIRES: Installation on the Traxxas E-Maxx SPECS:    Overall length: 2.75" (70mm)           Diameter of drive dog mount: .39" (10mm)           Diameter of shaft: .23" (6mm)  

89,-

På lager 2
KJØP
This is the Rear Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Rear bulkhead halves Part #5329           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo  

199,-

219,-

På lager 2
KJØP
-9%
This is the Center Half Shaft Set for the Traxxas E-Revo and E-Maxx FEATURES: Plastic construction, black in color INCLUDES: Center half shafts (three internal splined and two external splined) REQUIRES: Installation on the vehicle SPECS:    Diameter: 17.2mm (0.68")

75,-

På lager 5
KJØP
This is the Differential Kit for the Traxxas E-Revo and E-Maxx. FEATURES: Direct drop-in for E-Revo and E-Maxx           Transfers power to the front and rear differentials independently           Comes assembled with 500K oil           For single speed transmission only INCLUDES: One differential kit REQUIRES: Installation on E-Revo or E-Maxx

495,-

Ikke på lager
Ikke på lager
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png