Hopp til innhold

Traxxas 3668A Talon 2.8" Rear On All-Star Chrome Stampede

Art.nr: TRX 3668A

369,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires
                 for the electric Traxxas Stampede and Rustler.


FEATURES: 2.8" All Star black chrome wheels
          Talon tires with foam inserts


INCLUDES: Two 2.8" mounted rear talon tires, All Star chrome wheels and
            foam inserts


REQUIRES: Installation on the rear of the Stampede or Rustler


SPECS:    Outside diameter: 4.92" (125mm)
          Width: 2.63" (67mm)
          Inside diameter: 2.79" (71mm)
          Hex Size: 12mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Power HD 1812MG Waterproof 18kg En god og solid vanntett servo med metallgir for de fleste formål. Med en styrke på 18kg er den godt egnet for alt fra bil til fly og øvrige hobbyprosjekter. Benytter servohorn med 25T (Futaba) splines.   Vekt 56 gram uten ledning Mål 40,7 x 20,5 x 39,5 mm Egnet for 4,5 - 6,0 volt Holdekraft 18kg/cm Hastighet 0.12sec/60° (uten belastning) Temperatur    -20 til 50 grader Presisjon 4us

299,-

329,-

KJØP
-9%
Main chassis (grey) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

129,-

139,-

KJØP
-7%
  Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

39,-

KJØP
Denne erstatter TRX 1844 This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver           on most popular servos including: Futaba, Hobbico, Tower, Airtronics,           and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8"                 Diameter: 1"                 The servo saver has 6 holes for mounting the steering linkages.

55,-

KJØP
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
This is the Receiver Box Seal Kit for the Traxxas Stampede, Rustler, and Bandit. FEATURES Properly seals receiver box to minimize dirt and moisture exposure INCLUDES Silicone grease One Gasket Two Foam Strips Instructions REQUIREMENTS Application to receiver box

49,-

KJØP
This is a Traxxas 48P, 90T Spur Gear for models                        with Torque Control Slipper Clutch. FEATURES: 48 pitch           90 tooth           Designed for models with a slipper clutch           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   90

49,-

KJØP
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
These are the Traxxas 61mm Turnbuckle Toe Links  for the Traxxas Stampede.     FEATURES Metal and Nylon Construction  Silver and Black in Color  Assembled w/Rod Ends   INCLUDES Two 61mm (96mm center to center) turnbuckles   REQUIREMENTS Installation on the vehicle

99,-

KJØP
This is an optional Wheelie Bar in Blue for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, blue in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
 This is the Main Chassis for the Traxxas Stampede XL-5 FEATURES: Nylon Construction           Grey in Color INCLUDES: One Grey Nylon Chassis REQUIRES: Installation into Vehicle

119,-

KJØP
This is the Reciever & Battery Hold-Down Plate for the Traxxas Stampede. FEATURES:  Plastic construction, gray in color            Metal posts and body clips INCLUDES:  One battery hold down            One receiver hold down            Two metal posts            Two body clips            Servo tape/adhesive foam pad REQUIRES:  Installation on the Stampede

59,-

Ikke på lager
 This is a replacement set of skid plates for the Traxxas Stampede. FEATURES: Made of black molded nylon For the Traxxas Stampede SPECS:    Length of front plate: 5 5/8"    Thickness of front plate: 3/16"    Width of front plate: 2 1/8"    Length of rear plate: 4 3/8"    Thickness of rear plate: 1/8"    Width of rear plate: 2 1/8" INCLUDES:    (1) Front skid plate    (1) Rear skid plate

89,-

KJØP
These are the replacement body mounts for the Traxxas Stampede truck.  They are constructed of black plastic and are the posts that the lexan truck body attaches to. PACKAGE INCLUDES:    One front body mount    One rear body mount COMMENTS:  Does not include body clips

59,-

KJØP
These are the Rubber Tires and Wheels for the            Wheelie Bar on the Traxxas  Wheelie Bars. FEATURES: Machined blue aluminum ball bearing equipped wheels           Rubber Tires INCLUDES: Two rubber tires, four 5x8mm ball bearings, two blue aluminum wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

KJØP
-8%
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%
is is the stock 32P 11 Tooth Pinion Gear for the Traxxas Stampede 4x4 VXL. FEATURES: Steel construction INCLUDES: 32P 11 Tooth Pinion Gear with Set Screw REQUIRES: Fastening to motor shaft SPECS:    Number of Teeth: 11           Pitch: 32

49,-

59,-

KJØP
-17%
This is a 9 Tooth 32 Pitch Pinion Gear for the Traxxas. FEATURES: Machined Steel Designed for a 3mm shaft INCLUDES: One 9 tooth Pinion Gear One 3 x 4mm Set Screw

45,-

55,-

KJØP
-18%
These are the Rear Heavy Duty Stub Axles for the Slash 4x4 from Traxxas FEATURES: Aluminum construction INCLUDES: 2 rear stub axles           2 pins REQUIRES: Installation on vehicle

75,-

KJØP
These are the Heavy Dyty Differential Output Yokes for the                          Slash 4x4 from Traxxas FEATURES: Black plastic construction INCLUDES: 2 Ouput yokes           2 screw pins REQUIRES: Installation on vehicle

55,-

KJØP
Orginal dekke og felg til Stampede 4x4 både foran og bak.  This is a set of Traxxas 2.8" Mounted All Star Wheels and Tires. FEATURES: Fits the REAR of the nitro Stampede and Rustler and the                    FRONT of the electric Stampede and Rustler           2.8" All Star black chrome wheels           Talon tires with foam inserts INCLUDES: Two 2.8" mounted front talon tires, All Star chrome wheels and             foam inserts REQUIRES: Installation on the vehicle SPECS:    Outside diameter: 4.92" (125mm)           Width: 2.63" (67mm)           Inside diameter: 2.79" (71mm)           Hex Size: 12mm

379,-

KJØP
This is the 56 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 metric pitch INCLUDES: One 56T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png