Hopp til innhold

Traxxas 3354 Motor Cover Endbell Velineon 3500

Art.nr: TRX 3354

29,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

NB! Denne er den samme som TRX 3354R   

 

This is the Motor Cover Endbell Velineon 3500 from Traxxas.

FEATURES: Plastic construction, black in color

INCLUDES: Motor cover

REQUIRES: Installation on the vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

RPM Front Shock Tower for Slash 4×4, Stampede 4×4, Telluride & Rally Quick Notes: Replaces stock Traxxas #6839 Fits the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally Matching Rear Shock Tower also available RPM is proud to introduce our front and rear shock towers for the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally. These shock towers are designed to take some serious abuse without failing because nothing is worse than having a part break when you’re out having a fun day, whether it’s at the local track or at your favorite place to bash. Structurally, RPM shock towers are about as strong as they can be, keeping your suspension moving freely without added flex. However, under extreme crash situations, the nature of our proprietary materials allows it to give slightly, absorbing that impact energy to prevent damage to the shock tower and reduce the amount of transferred shock energy to the more fragile differential cases. Our material then returns back to its original shape almost instantly. No other material can do that! Additionally, RPM shock towers retain the large dust cover ribs that overlap the tops of the differential case, providing an extra layer of protection against dirt and grit not found on many aftermarket shock towers. RPM Shock Towers for the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally are stock replacement parts, molded in black.

149,-

KJØP
Fits: Traxxas Stampede 4x4 and Telluride 4x4 Rustler 4x4 and Hoss Color: Black   This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

369,-

KJØP
RPM Rear Shock Tower for Slash 4×4, Stampede 4×4, Rally & Telluride Replaces stock Traxxas #6838 Quick Notes: Fits the Traxxas Slash 4×4, Stampede 4×4, Rally & Telluride Replaces stock Traxxas #6838 Matching Front Shock Tower is also available RPM is proud to introduce our rear shock tower for the Traxxas Slash 4×4, Stampede 4×4, Rally & Telluride. These shock towers are designed to take some serious abuse without failing because nothing is worse than having a part break when you’re out having a fun day, whether it’s at the local track or at your favorite place to bash. Structurally, RPM shock towers for the Slash 4×4 & Telluride are about as strong as they can be, keeping your suspension moving freely without added flex. However, under extreme crash situations, the nature of our proprietary materials allows it to give slightly, absorbing that impact energy to prevent damage to the shock tower and reduce the amount of transferred shock energy to the more fragile differential cases. Our material then returns back to its original shape almost instantly. No other material can do that! Additionally, RPM shock towers retain the large dust cover ribs that overlap the tops of the differential case, providing an extra layer of protection against dirt and grit not found on many aftermarket shock towers. RPM Shock Towers for the Traxxas Slash 4×4 & Telluride are stock replacement parts, molded in black.

149,-

159,-

KJØP
-6%
These are the 4mm High Current Bullet Connectors from Castle Creations. FEATURES: Gold plated           Fits wire diameter up to 4mm           Use 16 gauge to 13 gauge wires           Up to 75A current INCLUDES: Three sets of bullet connectors REQUIRES: Solder and soldering iron. SPECS:    Length: .66" (17mm)           Diameter: .15" (4mm) inside (where the wire is soldered to)           Diameter: .19" (5mm) outside

149,-

KJØP
This is the Rear Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One rear bulkhead REQUIRES: Installation on Slash

75,-

KJØP
This is the Rear Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

49,-

59,-

KJØP
-17%
This is a set of TRAXXAS receiver tube caps and a spool that could be used for                          any receiver antenna tubes. FEATURES: Caps are yellow plastic.           Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps           One spool                     

25,-

KJØP
These are the Traxxas Telemetry Trigger Magnet Holders,                        Spur Gear/Telemetry Trigger Magnet FEATURES: Black plastic and metal construction INCLUDES: Two different plasting holders           One disk-shaped magnet           Three 8mm screws           Three 10mm screws SPECS:    Magnet diameter: 5mm           Magnet thickness: 2mm

35,-

Ikke på lager
 This is a pair of Long GTR Shock Shafts from Traxxas. FEATURES: Fits the front shocks of the LiPo equipped Traxxas Slash 4x4 Ultimate           TiN (titanium nitride) coating for smooth operation INCLUDES: Two Long GTR TiN coated Shock Shafts

129,-

KJØP
Høykvakitets Silicone demper olje med viskositet 350. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Features: Viscosity 500CPS / 41WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Fixed Gear Adapters

59,-

KJØP
This is the Motor Plate for the 1/10 scale Rally Race Car from Traxxas. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Motor Plate

85,-

KJØP
Battery Charge Indicator Plugs The #2943 Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries, blue for LiPos that are charged for storage, and grey to indicate discharged batteries. These plugs also help protect the battery plug terminals from accumulating dirt, corrosion, or foreign material during storage and transport. Each package includes 12 indicators: 4 green (charged), 4 grey (discharged), and 4 blue (storage charged)  

59,-

KJØP
This is the Long Temperature and Voltage Sensor from Traxxas. FEATURES: Functions with the Traxxas Link system to display battery voltage and             temperature INCLUDES: Long Temperature and Voltage Sensor with Mounting Screw SPECS:    Length: 14" (356mm)

139,-

159,-

KJØP
-13%
This is the Chassis for the Traxxas 1/10 scale Rally Race Car Series. FEATURES: Fiber construction, gray in color INCLUDES: Chassis for the Traxxas 1/10 scale Rally Race Car

239,-

259,-

KJØP
-8%
   This is the Magnet Holder/Center Diff Telemetry Magnet from Traxxas. FEATURES: Plastic magnet holder INCLUDES: Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

35,-

KJØP
 This is a 4x10mm Button Head Screw Set for the Traxxas Revo vehicle. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  16mm (.63")           Threaded Length: 10mm (.39")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the Electronics Box.

35,-

KJØP
This is the Temperature Sensor Mount for the Traxxas TQi Telemetry System. FEATURES: For use with electric powered Traxxas vehicles INCLUDES: Mount, Plastic Tie, and Thermal Pad

39,-

49,-

KJØP
-20%
This is a Traxxas Power Tap Connector, and is intended for use with Traxxas vehicles equipped with the Traxxas Telemetry system (Traxxas TQi Radio System with Docking Base). The Power Tap Connector attaches to your electric vehicle's speed control, allowing you to monitor battery voltage as you drive. This is a replacement part for the Traxxas XO-1 1/7 Scale vehicle. Needed to Complete: TRA6521 temperature sensor (long) or TRA6523 temperature sensor (short) is required to connect the power tap connector. Note: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with the Traxxas Link App installed. Most Traxxas kits require additional components to install the telemetry system. Refer to your instruction manual for details.

These are 3x12mm Button Head Screws from Traxxas FEATURES: Steel Construction           Black in color           Hex head INCLUDES: Six button head screws SPECS:    Length:  12mm (.47")           Diameter: 3mm (.12") COMMENTS: These can be use with various application.

35,-

Ikke på lager
This is the Blue Aluminum Steering Bellcrank from Traxxas. FEATURES: Metal construction, anodized blue in color           Factory assembled and ready to install INCLUDES: One red-anodized T6 aluminum steering bellcrank           Four 5x8mm ball bearings           Hardware REQUIRES: Installation COMMENTS: Also available in red.

379,-

399,-

Ikke på lager
-5%
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

Ikke på lager
This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  12mm (.63")           Threaded Length: 11mm (.45")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Ikke på lager
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png