Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 4x4 VXL / Traxxas 2660 Long Big Bore Shocks w/o Springs (2)
-7%

Traxxas 2660 Long Big Bore Shocks w/o Springs (2)

Art.nr: TRX 2660

389,-

419,-

- 7%
Traxxas

Traxxas
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are LONG BIG BORE SHOCKS by Traxxas.  They may be used with the
       many Taxxas cars.


FEATURES: Pre-assembled shocks only require filling with included oil,
            attaching included spacers and (not included) springs.
          Big-bore long shocks are hard-anodized and teflon coated T-6
            aluminum.


INCLUDES: Two Shock Caps (aluminum)          One Silicone Oil Bottle
          Two Cylinders (aluminum) 1-1/2"    Three Diaphragms (black rubber)
          Three Large C Clips                Two Ball Ends (white plastic)
          Three Flat Washers (nylon) 6mm     Two Bushings (metal)
          Two Spacers (teflon) 5mm           Four Pistons (black plastic)
          Six "O" Rings (blue)               Two Spring Retainers (plastic)
          Two Flat Washers (nylon) 5mm       Two Spring Spacers (black plastic)
          Five Small E Clips
          Two Shock Shafts (1-3/4"x1/8") approximately
          Twelve Spring Adjusters (various size)


REQUIRES: Springs
          C ring or needle nose pliers
          Tweezers

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde Traxxas 6857 Front Springs White Slash 4X4
Traxxas 6857 Front Springs White Slash 4X4
Art.nr: TRX 6857
Copied
These are the Front White Shock Springs for the Traxxas Slash 4x4 Vehicles. FEATURES: Steel construction           Progressive rate           White in color INCLUDES: Two Front White Shock Springs REQUIRES: Installation on the shocks SPECS:    Length: 47mm (1.9")           Inner Diameter: 15.5mm (0.61")           Outer Diameter: 18.6mm (0.73")           Wire Diameter: 1.7mm (0.07")

59,-

KJØP
Hovedbilde Traxxas 6861 Springs Front -20% Rate Orange Slash 4x4 ...
Traxxas 6861 Springs Front -20% Rate Orange Slash 4x4 ...
Art.nr: TRX 6861
Copied
This is a pair of Orange Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Orange firmness rating           -20% progressive compression INCLUDES: Two Orange Rate Front Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)  

65,-

KJØP
Hovedbilde Traxxas 6862 Springs Front -10% Rate Green Slash 4x4 ...
Traxxas 6862 Springs Front -10% Rate Green Slash 4x4 ...
Art.nr: TRX 6862
Copied
This is a pair of Green Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Green firmness rating           -10% progressive compression INCLUDES: Two Green Rate Front Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)

59,-

KJØP
Hovedbilde Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...
Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...
Art.nr: TRX 6863
Copied
This is a pair of Pink Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Pink firmness rating           +10% progressive compression INCLUDES: Two Pink Rate Front Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)  

59,-

KJØP
Hovedbilde Traxxas 6864 Springs Front +20% Rate Blue Slash 4x4 ...
Traxxas 6864 Springs Front +20% Rate Blue Slash 4x4 ...
Art.nr: TRX 6864
Copied
This is a pair of Blue Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Blue firmness rating           +20% progressive compression INCLUDES: Two Blue Rate Rear Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)

59,-

KJØP
Hovedbilde Traxxas 1664T Shock Shafts Long Nitro Rustler (2)
Traxxas 1664T Shock Shafts Long Nitro Rustler (2)
Art.nr: TRX 1664T
Copied
There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS:    Diameter: 3mm (0.118")           Length: 47 mm (1.85")           Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

KJØP
Hovedbilde Traxxas 1765 Rubber Diaphragm Plastic Shock
Traxxas 1765 Rubber Diaphragm Plastic Shock
Art.nr: TRX 1765
Copied
   These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4

29,-

KJØP
Hovedbilde Traxxas 1942 Rod End Ball Screw Connector B/E
Traxxas 1942 Rod End Ball Screw Connector B/E
Art.nr: TRX 1942
Copied
This set of rod ends, balls, and screws is used on all but four of Traxxas' kits.  It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes:  4 short rod ends (17mm)            16 long rod ends (19mm)            2  ball screws            18 hollow ball connectors

85,-

95,-

KJØP
-11%
Hovedbilde Traxxas 2362 Shock Rebuild Kit
Traxxas 2362 Shock Rebuild Kit
Art.nr: TRX 2362
Copied
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
Hovedbilde Traxxas 2664 Shock Cylinder Big Bore Long
Traxxas 2664 Shock Cylinder Big Bore Long
Art.nr: TRX 2664
Copied
Big Bore shock cylinder (long) (1)

95,-

KJØP
Hovedbilde Traxxas 2667 Shock Caps Big Bore (2)
Traxxas 2667 Shock Caps Big Bore (2)
Art.nr: TRX 2667
Copied
Hop-Up replacement Shock Caps (Big Bore) are designed to fit Traxxas Big Bore shocks: TRX 2660 Long Big Bore TRX 2661 Extra Long PACKAGE CONTAINS: 2-Caps FEATURES Round aluminum caps with threaded inside COMMENTS Rubber diaphragn is not included

85,-

KJØP
Hovedbilde Traxxas 2668 Spring Retainers Upper & Lower
Traxxas 2668 Spring Retainers Upper & Lower
Art.nr: TRX 2668
Copied
Upper and Lower Spring Retainers by Traxxas. PACKAGE INCLUDES:   1-Spring Retainers   2-Spring Adjustors   4-Spring Adjustors   4-Spring Adjustors   2-Spring Stoppers   2-Spring Adjustors COMMENTS: Spring adjustors, stoppers and retainers are used in the construction of shocks. The retainers and adjustors vary in size and width, all are constructed of black plastic. Parts come on a plastic tree

59,-

KJØP
Hovedbilde Traxxas 2669 Piston Head Set
Traxxas 2669 Piston Head Set
Art.nr: TRX 2669
Copied
Replacement PISTON HEAD SET for Traxxas Big Bore Shocks. PACKAGE INCLUDES:   2- Pistons (2-hole)   2- Pistons (3-hole)   2- Shock Mounting Bushings   2- Washers   FEATURES:   All parts are constructed of black plastic

39,-

KJØP
Hovedbilde Traxxas 2742X Rod Ends Short w/Hollow Balls (6)
Traxxas 2742X Rod Ends Short w/Hollow Balls (6)
Art.nr: TRX 2742X
Copied
This are Rod Ends Short for the Nitro T-Maxx.              These rods ends attach to turnbuckles for front/rear. FEATURES: Black nylon rod ends           Steel pivot balls INCLUDES: Six nylon rod ends           Six pivot balls REQUIRES: Turnbuckles: TRX 2742X SPECS:    Length: .695" (17.6mm)           Inner Diameter: .217" (5.5mm)

49,-

Ikke på lager

Kunder kjøpte også

Hovedbilde Traxxas 2457P Spring Rear Pink (2)
Traxxas 2457P Spring Rear Pink (2)
  Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

59,-

KJØP
Hovedbilde Traxxas 2458P Springs, front (pink) (2)
Traxxas 2458P Springs, front (pink) (2)
  Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

59,-

KJØP
Hovedbilde Traxxas 3744X Servo Saver
Traxxas 3744X Servo Saver
This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features: White plastic construction           Spring loaded           Two adaptors-Futaba and Airtronics

49,-

KJØP
Hovedbilde HPI 160809 Venture 18 CC Flux Comp Crawler Green Hovedbilde HPI 160809 Venture 18 CC Flux Comp Crawler Green
HPI 160809 Venture 18 CC Flux Comp Crawler Green
Experience the Thrill of 1/18 Mini Crawling Fun! The HPI Venture18 CC Flux 1/18 4WD RTR Brushless Rock Crawler by HPI delivers professional, competition crawler (CC) performance in a compact, ready-to-run package. Engineered for precision and power, it's designed to take on steep climbs, rugged terrain, and tight courses with ease. Combining a brushless power system, an aluminum plate chassis, and full metal gearing, this crawler provides unmatched durability and control. About the Venture18 CC Flux   Powerful Brushless Performance The Venture18 CC Flux is powered by a 3500kV brushless outrunner motor paired with a water-resistant Flux ESC. This high-spec setup delivers a smooth power curve with strong torque, ideal for climbing and maneuvering over rough obstacles. The ESC's drag brake adjustment feature allows users to fine-tune braking behavior directly from the included transmitter, providing precise downhill control. Paired with a Plazma 3S 360mAh LiPo battery, this system offers efficient power delivery for extended crawling sessions. Precision Engineering & Durability This model is engineered for performance and reliability with a 4WD shaft-driven drivetrain supported by an aluminum plate competition chassis. Both front and rear differentials feature metal spool overdrive gears, enhancing traction and steering response when navigating uneven ground. The full metal gear half-dig transmission allows the rear drive to be disengaged for tighter turns, while the counter-rotating center drivetrain helps maintain balance and stability. Together, these elements create a durable, competition-ready platform that performs consistently across demanding conditions. Advanced Suspension & Realistic Design The Venture18 CC Flux is equipped with oil-filled adjustable coilover shocks featuring threaded bottom caps for tuning ride height and damping. Its Tredz Rover tires, made from an ultra-soft compound, provide excellent grip and traction across rock, dirt, and uneven surfaces. Mounted on 1.3-inch CC-6 three-piece beadlock wheels, the tires maintain their hold securely during operation. The RidgeLine half cage low-profile body combines performance and realism, complemented by detailed plastic body components and two included livery designs so users can customize their crawler's appearance to match their style. Features: Aluminum plate competition chassis for rigidity Full metal drivetrain for long-term durability Metal front and rear spool overdrive differentials Half-dig transmission for rear drive disengagement Counter-rotating center drivetrain for improved balance Oil-filled adjustable coilover shocks with threaded caps Ultra-soft compound tires for superior traction Low-profile RidgeLine half cage body for performance and realism High-efficiency 3500kV brushless motor and ESC system Two different livery designs included for customization Includes: (1) Venture18 CC Flux 1/18 4WD RTR Brushless Rock Crawler (1) Pre-Installed High-Spec FLX18 Competition Crawler ESC w/XT30 Connector (1) Pre-Installed Brushless Outrunner Motor (3500kV) (1) Pre-Installed 1.5kg Metal Gear Steering Servo (1) Pre-Installed 1kg Plastic Gear Dig Servo (1) Plasma 3S 10C LiPo Battery (11.1V/360mAh) (1) 6-Channel 2.4GHZ Radio System (1) USB Charger Product Manual Needed To Complete: (4) AA Batteries for Transmitter Specifications: Scale 1:18 Drive 4WD Power Source 3S LiPo Length 9.06in (230mm) Wheelbase 6.38in (162mm) Width 5.24in (133mm) Height 4.06in (103mm) Weight - Electronics Motor: Brushless ESC Brushless Connector XT30 Servo 1.5kg Metal Gear Steering Servo Wheels Front 1.3in Rear 1.3in Hex - Tires Front Tredz Rover - Ultra Soft Compound Rear Tredz Rover - Ultra Soft Compound Assembly Level RTR* *Tech Note: Ready-to-Run models come equipped with all electronics and include the transmitter needed for use. Please check the "Needed To Complete" above to make sure you have everything you need to get out and enjoy your RC model.

3.545,-

3.745,-

KJØP
-5%
Hovedbilde Tamiya 54032 ANAEROBIC GEL THREAD LOCK
Tamiya 54032 ANAEROBIC GEL THREAD LOCK
Tamiya 54032 ANAEROBIC GEL THREAD LOCK DESCRIPTION: Tamiya is now releasing a new easily applied screw lock gel for helping in the prevention of looseness in metal parts in R/C vehicles. It can also be applied on chassis" as well engines.

79,-

KJØP
Hovedbilde Traxxas 8149 Rod Ends Extended for Long Arm Lift Kit ...
Traxxas 8149 Rod Ends Extended for Long Arm Lift Kit ...
Extended rod ends with hollow balls for TRX-4® trucks equipped with a Long Arm Lift Kit. Includes 4 straight, and 4 angled rods assembled with hollow balls.

79,-

KJØP
Hovedbilde Traxxas 8647X Rod Ends HD (8)
Traxxas 8647X Rod Ends HD (8)
  Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)

109,-

KJØP
Hovedbilde Traxxas 7644 Gear, 9-T pinion/ set screw
Traxxas 7644 Gear, 9-T pinion/ set screw
Gear, 9-T pinion/ set screw

35,-

KJØP
Hovedbilde Traxxas 7645 Gear 10T Pinion/Set Screw Teton
Traxxas 7645 Gear 10T Pinion/Set Screw Teton
This is the 10 Tooth Pinion Gear and Set Screw for the LaTrax Teton Monster Truck from Traxxas. FEATURES Metal construction Stock replacement pinion gear INCLUDES 10 Tooth Pinion Gear Set Screw Two 3x4mm Phillips Head Screws Metal Plate

29,-

KJØP
Hovedbilde Traxxas 8218 Floor Pans Left and Right TRX-4
Traxxas 8218 Floor Pans Left and Right TRX-4
Floor pans, left & right

99,-

KJØP
Hovedbilde Traxxas 2667 Shock Caps Big Bore (2)
Traxxas 2667 Shock Caps Big Bore (2)
Hop-Up replacement Shock Caps (Big Bore) are designed to fit Traxxas Big Bore shocks: TRX 2660 Long Big Bore TRX 2661 Extra Long PACKAGE CONTAINS: 2-Caps FEATURES Round aluminum caps with threaded inside COMMENTS Rubber diaphragn is not included

85,-

KJØP
Hovedbilde Traxxas 2661 Shocks Big Bore X-Long Hard Alu PTFE TiN ...
Traxxas 2661 Shocks Big Bore X-Long Hard Alu PTFE TiN ...
Shocks Big Bore X-Long Hard Alu PTFE TiN (2) Big-bore shocks (x-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2) Set of two X-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for smooth, long-wearing performance. Adjustments are a snap with clip-on spring pre-load spacers. The shocks come pre-assembled and include shock oil. Springs sold separately.

349,-

369,-

KJØP
-5%
Hovedbilde Traxxas 1675 Oilite Bushings (14)
Traxxas 1675 Oilite Bushings (14)
This is a replacement bushing set for various TRAXXAS KITS.                                                   . FEATURES: Made of metal INCLUDES: 14 bushings SPECS:    5x11mm bushings COMMENTS: These bushings would work on any vehicle using 5x11mm bushings.

59,-

KJØP
Hovedbilde Traxxas 2658 Shock Big Bore Short Complete (2)
Traxxas 2658 Shock Big Bore Short Complete (2)
Shock Big Bore Short Complete (2) Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm shafts, 29mm shafts included) BIG BORE ALUMINUM SHOCKS: Traxxas Big Bore shocks provide ultimate dampening control. They’re hard-anodized, PTFE-coated and have large cylinders for greater oil capacity. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

389,-

419,-

KJØP
-7%
Hovedbilde Robinson Racing 1114 Mod 0.6 Metric Pinion Gear (14T)
Robinson Racing 1114 Mod 0.6 Metric Pinion Gear (14T)
Robinson Racing 1114 Mod 0.6 Metric Pinion Gear (14T) Robinson Racing Mod 0.6 Metric Pinion Gears are precision cut from hard alloy steel and lightened to reduce weight. The Gear has an 1/8 inch bore so it fits any motor with a standard 1/8" motor shaft, and one 5-40 set screw has been included. Features: Precision cut from hard alloy steel Lightened for reduced weight 1/8" bore fits standard 1/8" motor shafts Includes one 5-40 set screw Choose from multiple tooth count options to fine tune the gear ratio of your vehicle

89,-

KJØP
Hovedbilde Robinson Racing 1118 Pinion Gear Metric 18T
Robinson Racing 1118 Pinion Gear Metric 18T
These are .6 mod pinion gears. These are used on cars such as the Tamiya touring cars (this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.     SPECIFICATIONS Number of Teeth: 18 Pitch: .6 Mod Bore: 1/8" 0.125" (3.2mm)

89,-

KJØP
Hovedbilde Robinson Racing 1116 Pinion Gear Metric 16T
Robinson Racing 1116 Pinion Gear Metric 16T
These are .6 mod pinion gears. These are used on cars such as the Tamiya touring cars (this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.     SPECIFICATIONS Number of Teeth: 16 Pitch: .6 Mod Bore: 1/8" 0.125" (3.2mm)

89,-

KJØP
Hovedbilde Traxxas 2669 Piston Head Set
Traxxas 2669 Piston Head Set
Replacement PISTON HEAD SET for Traxxas Big Bore Shocks. PACKAGE INCLUDES:   2- Pistons (2-hole)   2- Pistons (3-hole)   2- Shock Mounting Bushings   2- Washers   FEATURES:   All parts are constructed of black plastic

39,-

KJØP
Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ... Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...
RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...
RPM Low Visibility Wheelie Bars for Slash 2WD, Slash 4×4, Losi SCTE & ECX Torment 4×4 Quick Notes: Designed for use with RPM rear bumpers / bumper mounts only Fits the RPM Slash 2wd Rear Bumper Fits the RPM Slash 4×4 Rear Bumper Fits the RPM ECX Torment 4×4 Rear Bumper Fits the RPM Losi SCTE Rear Bumper Mounts A serious issue with most currently available wheelie bars is the inability to use the truck as an off-road vehicle because most wheelie bars tend to stick out too far behind the truck. The RPM Low Visibility Wheelie Bar solves that problem! Since our wheelie bar and included wheels sits inside the protection of the rear bumper, they don’t stick out allowing the truck to function normally when rippin’ up the local track, yet still do their job when the occasional heavy finger pull yanks the front wheels off of the ground! The RPM Low Visibility Wheelie Bar design bolts directly to all RPM Slash bumpers (both 2wd and 4×4), Losi SCTE & ECX Torment 4×4 at the mud flap mounts, while still allowing the use of RPM Mud Flaps (RPM #81012) as well as our Losi SCTE Bumper Mounts (RPM #73312! The RPM Wheelie Bar stays tucked up behind the rear bumper, yet sitting low enough to allow the wheels to touch down once the front end starts catching some serious air! Now any Slash, SCTE or Torment 4×4 owner can pull some sick wheel stands without the fear of grinding crucial rear bumper support components into dust! RPM Low Visibility Wheelie Bars are sold ready to install on an RPM Rear bumper (sold separately) with all necessary mounting hardware and complete instructions for assembly. RPM Low Visibility Wheelie Bars are manufactured from our trademark blend of incredibly strong nylons and backed by our limited lifetime warranty again breakage. Tech Notes: RPM Low Visibility Wheelie Bars are designed for use with RPM Slash 2wd and Slash 4×4 rear bumpers, ECX Torment 4×4 rear bumpers as well as our Losi SCTE Rear Bumper Mounts exclusively and will not work with stock rear bumpers or bumper mounts.

149,-

KJØP
Hovedbilde Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover
Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover
Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

KJØP
-12%
Hovedbilde Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4
Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4
This is the Gear Cover/Motor Wire Hold Down for use on the                              Traxxas Slash 4X4. FEATURES: Nylon construction           Black in color INCLUDES: One Gear Cover           One motor wire hold down REQUIRES: Installation on the vehicle

59,-

69,-

KJØP
-14%
Hovedbilde RPM 80023 Front Bumper Chrome & Skid Plate Gray Slash ...
RPM 80023 Front Bumper Chrome & Skid Plate Gray Slash ...
Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate.  Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!    

269,-

299,-

KJØP
-10%
Hovedbilde Traxxas 1654X Wheel Hubs Aluminum (2)
Traxxas 1654X Wheel Hubs Aluminum (2)
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
Hovedbilde Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...
Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...
This is a pair of Pink Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Pink firmness rating           +10% progressive compression INCLUDES: Two Pink Rate Front Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)  

59,-

KJØP
Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC
Traxxas 3340 Cooling fan, Velineon VXL-3s ESC
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png