Hopp til innhold

Traxxas 2581 Button Head Machine Screw 3x25mm Revo (6)

Art.nr: TRX 2581

35,-

Traxxas

Traxxas

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are 3x25mm Button Head Machine Screws w/hex drive
                        for the REVO from Traxxas.


FEATURES: Black steel construction


INCLUDES: Six 3x25mm Button Head Machine Screws


REQUIRES: 2mm hex wrench


SPECS:    Length:  25mm
          Diameter: 3mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the 105mm Driveshaft for the HPI WR8 Rally Car Series.     FEATURES Steel construction   INCLUDES 105mm Driveshaft   SPECIFICATIONS  Length: 4.13" (105mm) from center of ball ends  Diameter: 0.15" (3.9mm)

49,-

På lager 2
KJØP
          This is the Front Bumper Set FEATURES Made of black plastic INCLUDES Two different pieces   SPECIFICATIONS  Longer piece, length: 2-11/16" (65mm)  width: 4-5/8" (117mm)  height: 5/8" (16mm)  Shorter piece, length: 2" (51mm)  width: 4-1/2" (114mm)  height: 1-3/8" (35mm)      

119,-

På lager 2
KJØP
This is the Drive Shaft 6x72mm For the HPI Racing WRI and Bullet Series FEATURES: Steel construction INCLUDES: One driveshaft COMMENTS: HPI Racing Bullet Series includes Bullet ST Flux 2.4GHz RTR Bullet MT Flux 2.4GHz RTR  Bullet ST 3.0 Nitro 2.4GHz RTR Bullet MT 3.0 Nitro 2.4GHz RTR This part set can also be used for the 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR       (11)

95,-

På lager 7
KJØP
Suspension arms, lower, black (left and right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

145,-

På lager 2
KJØP
Bumper, front (for use with #8990 LED light kit)

69,-

På lager 4
KJØP
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

På lager 3
KJØP
-11%
Replacement Handle for Traxxas Tool Kit

119,-

På lager 1
KJØP
Yeah Racing Tornado High Speed Cooling Fan 30 x 30mm Description: Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you. Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan. The maximum power input voltage is 8.4v (2 cells Li-Po) Feature: For: ESC / Heatsink / Motor Color: Black Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.501CFM. Current: 0.28A Weight: 9.0g Connector: JST Include: Tornado Cooling Fan (1 Pc) Round Head Fitting Screw (4 Pc) Instruction Manual (1 Pc)

119,-

129,-

** Ikke på lager
KJØP
-8%
Yeah Racing Tornado High Speed Cooling Fan (OR) 30x30mm for Motor Heat Sink Description: Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you. Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan. The maximum power input voltage is 8.4v (2 cells Li-Po) Feature: For: ESC / Heatsink / Motor Color: Orange Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.501CFM. Current: 0.28A Weight: 9.0g Connector: JST Include: Tornado Cooling Fan (1 Pc) Round Head Fitting Screw (4 Pc) Instruction Manual (1 Pc)

119,-

129,-

** Ikke på lager
KJØP
-8%
Traxxas 8919R Battery Hold-down Set Maxx (Long Wheelbase) Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase))

129,-

På lager 2
KJØP
Traxxas 8922R - Chassis (Main) Maxx (Long Wheelbase)

249,-

På lager 2
KJØP
Traxxas 8945R Skidplate Center Maxx (Long Wheelbase)  

109,-

På lager 2
KJØP
Traxxas 8955R Driveshaft Center Alu Maxx (Long Wheelbase)

129,-

På lager 1
KJØP
Shock oil bottle (60cc) (for mixing shock oil) Create your own custom shock oil weights by combining different silicone shock oils in this mixing bottle.

39,-

På lager 5
KJØP
Body Maxx (Long Wheelbase) Yellow Body, Maxx®, yellow (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase)) Is it time to upgrade your Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid plate, and tailgate protector. Fits V2 Maxx® body (352 mm wheelbase).   SPECIFICATIONS   Car Type: Truck Scale: 1/10 Wheel base: 352 mm Painted: Yes

829,-

899,-

På lager 1
KJØP
-8%
Suspension Arm Lower Right F/R Blue X-Maxx WideMaxx, XRT Suspension arm, lower, blue (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

179,-

199,-

** Ikke på lager
KJØP
-10%
Suspension arm, lower, blue (1) (left, front or rear) (for use with #7895X X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

189,-

209,-

På lager 2
KJØP
-10%
Shock shaft, 72mm (GT-Maxx®) (steel, chrome finish) (2)/ rod ends (2)/ hollow balls (2)

145,-

På lager 1
KJØP
Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel)

39,-

På lager 4
KJØP
Suspension pin set, complete (hardened steel), 4x64mm (4), 4x22mm (4), 4x38mm (4), 4x33mm (4), 4x47mm (4)/ 3x8mm BCS (14)/ 3x6mm BCS (4)/ retainers (8)

319,-

** Ikke på lager
KJØP
Traxxas TQi & Aton Transmitter Phone Mount Mount a Mobile Device to your TQi or Aton Transmitter The new Traxxas RC Transmitter Phone Mount provides a convenient mounting base for your mobile device on TQi and Aton transmitters. This mount makes monitoring real-time telemetry and adjusting settings simple, keeping your device secured to the radio for easy access. Spring loaded clamps hold a variety of mobile devices to the mount, and the base swivels and tilts to customize the position. Get the most from Traxxas Link telemetry accessories and apps with the new Transmitter phone mount.   Neither a smart-phone or a transmitter is included.  

199,-

219,-

På lager 3
KJØP
-9%
This is a pair of 4x85mm Suspension Pinsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction Fastens lower rear suspension arms to chassis INCLUDES Two 4x85mm Suspension Pins SPECIFICATIONS Diameter: 0.16" (4mm) Length: 3.3" (85mm)

49,-

På lager 2
KJØP
High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX6 Applications: This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It's the ideal option for high-end aggressively powered builds. Specifications Scale: 1/6th 1/7th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A   Wires & Connectors Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)   Fan Size: 35.0x35.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC   ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port   Firmware Firmware Upgrade: Supported   Size & Weight Size: 70.0x56.0x46.5mm Weight: 240g   Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/6th 1/7th Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV≤1500/8S LiPo: KV≤1200(5892 Size Motors) Click here to look at the FAQ and Software Updates for EzRun MAX6 This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.  

1.795,-

2.195,-

** Ikke på lager
KJØP
-18%
  These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck       FEATURES Steel construction Secures the toe links to the steering blocks     INCLUDES Six 4x35mm Button Head Machine Screws     REQUIREMENTS 2.5mm Hex Wrench     SPECIFICATIONS Diameter: 4mm Length: 35mm

39,-

** Ikke på lager
KJØP
VAPEX LiPo-Safe Bag-D 125x64x50mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Perfect for 1/16-1/18 car batteries, 1-2s Shorty LiPo's and smaller airplane batteries Fits inside the storage Bag-E Velcro Flap Size: 125x64x50mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

89,-

På lager 15
KJØP
-11%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png