Hopp til innhold

Traxxas 2514 Sponsor Decal Sheet

Art.nr: TRX 2514

59,-

Traxxas

Traxxas

** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

     This is a Sponsor Decal Set for R/C Cars
                                from Traxxas.

FEATURES: These decals are designed to be used on any scale lexan R/C car and
            truck bodies.
          Pressure sensitive, peel and stick vinyl decals.
          These are the contingency/sponsorship decals that are used on race
            cars.
          Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,
            Mr. Gasket, NOS, Accel, Hurst, and more.
          Multi-purpose decal set is appropriate for any type of car.

INCLUDES: One Sponsor Decal Set.

SPECS:    Length: 9-1/8" (23.2cm)
          Width:  5-1/8" (13.0cm)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites. For use on Electric powered aircraft only (not for glow engines). FEATURES Gray composite propeller blades that assemble onto a propeller hub. Comes with five adapter rings that adapt to different motor shafts. Comes in a bag attached to a header card. INCLUDES One composite propeller Five composite adapter rings REQUIREMENT SALL props require balancing, this is VERY important. May need prop reamer SPECIFICATIONS Diameter: 9" (229mm) Pitch: 7.5 Hub inner diameter: 0.25" (605mm)

59,-

På lager 2
KJØP
Ferdig lakkert karosseri til RedCat Ascent 18. Dekalark medfølger.

275,-

** Ikke på lager
KJØP
Absima 1010031 Main Drive Shaft Set & Rear Axle Hub 1:18 Micro Crawler Pro/Evo, 1:18 Mini Crawler

149,-

169,-

På lager 2
KJØP
-12%
Traxxas High-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx® Tough! The Traxxas Maxx redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx’s extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. QUICK FEATURES ON MAXX LED LIGHT KIT: Compatible with Velineon VXL-4s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. MAXX LED LIGHT KIT INCLUDES: High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-4s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures. High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-4s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance. Technology Customize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

1.239,-

1.349,-

På lager 3
KJØP
-8%
Body support/ 3x12mm CS (4) / (fits #9011 body)

89,-

På lager 2
KJØP
Skid plate, roof (body) (black) (left & right)/ 3x8mm CS (4)

49,-

På lager 1
KJØP
 Tailgate protector/ 3x10mm flat-head screw (3)

49,-

På lager 3
KJØP
Traxxas HOSS 4x4 VXL Body Mount front/rear

219,-

På lager 1
KJØP
Traxxas 9224 Bumper Front for Winch TRX-4 Ford Bronco 2021 Bumper, front/ winch/ winch mount (assembled)

179,-

På lager 2
KJØP
Traxxas 9225 Bumper Rear Ford Bronco 2021  

79,-

På lager 2
KJØP
Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Replacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

159,-

På lager 1
KJØP
Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Replacement front driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

159,-

På lager 1
KJØP
Denne passer også til: Stampede 4X4 BL-2s TRX 67154-4 og Stampede 4X4 VXL TRX 90376-4 Body, Hoss® 4X4 VXL (clear, requires painting)/ window, grille, lights decal sheet From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the

299,-

329,-

På lager 1
KJØP
-9%
Komplett FPV mode App-kompatibel 7min flytid Flere kule funksjoner! UDI her med en tøff liten drone med funskjoner som auto takeoff/landing, stabilisering av flyretning og høyde for å nevne noe. Om du ønsker å fly i sanntid plasserer du enkelt smarttelefonen din i mobilholderen på radio og kobler dronen opp mot UDI-appen! PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   Funksjoner Live-feed Bilde til telefon i 480P / 20fps Høydehold-modusen Gjør flyturen mer stabil og enklere å kontrollere. Du kan la Beetle holde seg i en viss høyde slik at den kan filme bedre Takeoff/Landing Dronen vil ta av/lande automatisk som gjør start og slutt på flyturen enda mer bekymringsfri Hold mode Hvis du ønsker hjelp med å holde retningen på dronen kan du aktivere kursholdmodus i begynnelsen av flyturen, og dermed kan du fly dronen enkelt Kamerajustering Kamera kan justeres med 90 grader om du f.eks ønsker et bredere bilde, dette gjøres via appen "Flyingsee" Alarm Beetledronen er utstyrt med alarmer som gir deg beskjed om du flyr for langt unna og lavt batteri FPV Ved bruk av appen kan du få livebilde fra dronen som gir deg muligheten til å fly i sanntid Eskens innhold I esken finner du UDI Beetle dronen, radio, usb-lader, 1x 3,7V 500mah LiPo-batteri, skrujern, propellverktøy og propeller. Du behøver 4stk AA-batterier. PS! Det medfølger kun 1x drivbatteri til dronen, selv om det på noen bilder/klipp kan være avbildet flere. Batteriene er enkelt utskiftbare og ytterligere kan kjøpes separat. Spesifikasjoner Flytid 6-7min Ladetid 75min Rekkevidde radio Opp til 50m Rekkevidde FPV Opp til 20-30m Batteri 3.7V 500mah LiPo Dimensjoner 140x140x43.5mm Vekt 63g  

749,-

799,-

På lager 1
KJØP
-6%
Traxxas 5452X - U-Joints Set U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts) Driveshaft U-joint rebuild kit. Includes carriers (4), cross pins (4), headed pins (4) screw pins (2), hex pins (2), and E-clips (6). Rebuilds 2 driveshafts. Replacement part for these models: Ford® Fiesta® ST Rally Brushless Maxx® Rustler® 4X4 Brushless Slash® 4X4 Brushless Stampede® 4X4 Brushless

129,-

139,-

På lager 2
KJØP
-7%
Body Reinforcement Set (Body #9011)

59,-

På lager 4
KJØP
It’s back, and ready to obliterate unfriendly terrain just like before! This time, the Tamiya Super Clod Buster appears as a special Black Edition, with new colors for the body and components, a brand-new sticker design and more! Two Motors and 4WS System The Super Clod Buster is equipped with two motors and tightly sealed gearboxes that have been molded as one piece with axle housing. Minimum power loss and smooth cornering are obtained thanks to gear train transmission and differentials. The included Dual Motor ESC provides ample power to get your truck over obstacles. Furthermore, this monster truck is also equipped with a 4WS system for 4-wheel drive steering. This feature makes tight cornering with such a big machine easy! • 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The truck body is injection molded in black plastic, with detail and realism. Metal- plated parts are included to depict front grille, supercharger air intakes and roll bars. • Red plastic bumper and damper components. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that provide ground clearance of 55mm and a superb off-road drive. • Four-wheel steering. • Two Type 540 motors included. • Included: Hobbywing Produced ESC (Tamiya Specification TEU-201 BK) • New Sticker design. • Requires: 2 or 3 channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and TS paint. TEU-201 BK (For Twin Motor) ESC • Compact forward/reverse electronic speed controller for twin-motor R/C models such as Super Clod Buster. • Large aluminum heat sink and cooling fan allow effective heat dissipation. • Low voltage protection function limits potential for over discharging of battery pack. • Compatible with not only NiCd battery packs but also LF battery packs and NiMh batteries. • Features overheat protection function. • LED warnings indicate no-signal status and show protection function status. • Built-in BEC (6V/4A) is compatible with servos such as digital servos. • Features Tamiya battery connectors. Specifications: • Compatible receiver: Ground use R/C receiver • Control system: High-frequency system (8Khz) • Max continuous current: (FET Spec): 80A • Functions: Forward, reverse, and brake • Output: Forward 100%, reverse 75% • Power Supply voltage: 606V-7.2V • Receiver output: BEC 6V/4A • Compatible motor: Sport Tuned Motor or brushed motor of 25 turns and above. • Dimensions (including protruding sections): 47.0X36.5X26.5mm (39.0mm including cooling fan) • Weight: 77.5g  

4.695,-

4.895,-

** Ikke på lager
KJØP
-4%
This is Tamiya Color for Aircraft Spray Paint (PS-53 Lame' Flake)                         For Adult Modelers Only. FEATURES: Specially developed for finishing aircraft models. The color is             formulated to provide the authentic tone to 1/32 & 1/48 scale             model aircraft           The paint is a synthetic lacquer that cures in a short period             of time           Extremely useful for painting large surfaces           The color of the lid represents the color of paint INCLUDES: (1) Spray Can of Paint SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Highly flammable.

179,-

På lager 5
KJØP
Speed Bit Master Set Hex Driver (7-pieces) Traxxas 7-Piece Metric Hex Bit Master Set 7-Piece Metric Hex Bit Master Set (#8711) Features: Precision-ground, hardened steel metric hex drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm Ball end drivers: 2 mm, 2.5 mm, 3 mm Maximum Durability 7-Piece Metric Hex Bit Master SetTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™.  

949,-

999,-

På lager 2
KJØP
-5%
Description   DOHA 1:20th Scale Desert Truck Red Introducing the DOHA 1:20 Scale Desert Truck – a compact yet powerful off-road vehicle from Maverick RC. This 1:20 scale 4WD truck combines the rugged capabilities of larger RC models with the convenience of a size that fits comfortably in your hand, offering unmatched versatility for off-road exploration. The DOHA features a durable shaft drivetrain and 3-gear differentials, ensuring optimal power distribution for exceptional stability and precision handling across diverse terrains. Its reinforced cage design, coupled with a custom screen-printed, rear-hinged Desert truck body, not only enhances its visual appeal but also provides easy access to the battery tray. Available in four distinctive color options, the DOHA allows for a personalized touch. The truck is equipped with body color-matched shocks, a motor heatsink for efficient cooling, and intricately detailed wheels, contributing to both performance and aesthetics. Powered by an optimized 370-size motor, the DOHA delivers impressive top speed and acceleration. The color-coordinated heatsink further ensures reliable performance during extended use. Included with the DOHA is the Maverick Element 600mAh Li-ion battery, a practical USB charger, the MTX-201 2.4GHz radio system, and the 2-in-1 water-resistant MSRS-201 receiver/speed and light controller. Additionally, the DOHA is fitted with LED lights on the roof cage, enabling operation in low-light conditions for extended playtime after sunset. The DOHA 1:20 Desert Truck offers an exciting, durable, and user-friendly RC experience, perfect for both seasoned enthusiasts and newcomers alike.   Features: 4WD Shaft Driven Truck Independent Double Wishbone Suspension Aluminum Capped Coilover Shocks Gear Differentials Front & Rear Enclosed Gear Cover - To keep debris away from the Spur Gear Dual Point Bell Crank Steering with Servo Saver Splashproof Electronics Brushed 370 Motor 2.4GHz Radio with 2 in 1 ESC/Receiver Speed Limiter using Throttle Trim on Transmitter - reduce top speed for beginners Li-Ion 7.4V 600mAh Battery wBEC connector USB Charger Roof Mounted LED Lights Color-coded shocks, heatsink, wheel details, and transmitter wheel Twin-Deck aluminum chassis Pre-cut factory-finished bodyshell Available in four color options Required for operation: 3x AA batteries for transmitter Specification: Length: 240mm Width: 150mm Height: 110mm Wheelbase: 147mm Items Required: 3 x AA Batteries for transmitter - HPI Recommends #101939 Plazma AA Batteries

995,-

1.095,-

** Ikke på lager
KJØP
-9%
  Truck Tires on 2.2" Wheels Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit.   Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 92.5 mm Tire Width: 43.5 mm Weight (each): 87 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Pioneer 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 10.5 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

269,-

289,-

På lager 1
KJØP
-7%
These are the optional Black Rate GTR Shock Springs for use on the                  Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Steel construction           Red in color           2.22 rate, black INCLUDES: Two GTR Shock Springs REQUIRES: Installation on the vehicle SPECS:    Length: 19.75mm (0.78")           Outer Diameter: 13.75mm (0.54")           Inner Diameter: 10.95mm (0.43")           Wire Diameter: 1.4mm (0.06")

49,-

På lager 4
KJØP
These are the Front and Rear Toe Links for use on the                Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Red in color INCLUDES: Four Front/Rear Toe Links           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 86mm (3.4")           Diameter: 5mm (0.20")

75,-

På lager 2
KJØP
These are the Pushrods and Hollow Balls for use on the                  Traxxas 1/16 E-Revo, Slash, Summit and Rally VXL 4WD RTR. FEATURES: Molded composite construction           Red in color INCLUDES: Four Pushrods           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 70mm (2.8")           Diameter: 5mm (0.20")

75,-

På lager 3
KJØP
Denne passer veldig bra i 1/10 Axial Capra.   Gens Ace 3S 3600mAh 60C. Batteriet leveres ferdig med Deans batteriplugg og XH balanseringplugg. Størrelsen er 89x42x26mm , batteriene passer godt til 1/10 crawlere.   Spesfikasjoner: * Kapasitet: 3600mAh * Spenning: 3S 11.4V * Vekt: 218gram * Størrelse: 89x42x26mm * Strømplugg: Deans/T-Plug

629,-

** Ikke på lager
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png