Hopp til innhold

Tamiya 9335487 Front Body Toyota Hilux High-Lift Kit

Art.nr: 19335487

299,-

Tamiya

Tamiya

På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Front Body for the Toyota Hilux

FEATURES: White plastic pre-trimmed construction

INCLUDES: One front body

REQUIRES: Painting and installing on chassis

SPECS:    Length: 10" (254mm)
          Width:  7" (177mm)
          Height: 5" (121mm)

 

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Tilbehør

Kunder kjøpte også

 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Dark Yellow Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Bittydesign Table Pad (51x41cm) The Bittydesign Anti-Slip Table Pad is the perfect accessory to give at your box area the best look. Modern graphic, multiple colors, original logo and our company's new 2017 theme on the background. High quality materials and durable surface thanks to a resistant anti-scratch pvc sheet. The small Table Pad has been designed in term of size (51x41cm) to fit perfectly a 1/10 model (On and Off-road) and a 1/8 buggy chassis.

249,-

KJØP
This is Tamiya Color Spray Paint for Aircraft (AS-30 Dark Green 2 RAF).  For Adult Modelers Only.     FEATURES Specially developed for finishing aircraft models  This paint was designed especially to allow you to achieve a  realistic finish on your 1/32 scale Supermarine Spitfire Mk.IXc  Subtle shades can easily be obtained on your models by simple  spray strokes  As these paints resistant to enamel thinners, you can apply panel  lining over them without damaging your models finish  Semi-gloss finish  The color of the lid represents the color of paint   INCLUDES One Spray Can of Paint   SPECIFICATIONS  Net Volume: 3.4oz (100ml)   COMMENTS Highly flammable

139,-

KJØP
This is Tamiya Color Spray Paint for Aircraft (AS-14 Olive Green USAF). For Adult Modelers Only.     FEATURES Specially developed for finishing aircraft models. The color is  formulated to provide the authentic tone to 1/32 & 1/48 scale  model aircraft.  Subtle shades can easily be obtained on your models by simple  spray strokes.  The paint is a synthetic lacquer that cures in a short period  of time.  Extremely useful for painting large surfaces.  The color of the lid represents the color of paint.   INCLUDES (1) Spray Can of Paint   SPECIFICATIONS  Net Volume: 100ml   COMMENTS  Highly flammable.

119,-

KJØP
This is Tamiya Color Spray Paint for Aircraft (AS-9 Dark Green RAF).  For Adult Modelers Only.     FEATURES Specially developed for finishing aircraft models. The color is  formulated to provide the authentic tone to 1/32 & 1/48 scale  model aircraft.  Subtle shades can easily be obtained on your models by simple  spray strokes.  The paint is a synthetic lacquer that cures in a short period  of time.  Extremely useful for painting large surfaces.  The color of the lid represents the color of paint.   INCLUDES (1) Spray Can of Paint   SPECIFICATIONS  Net Volume: 100ml   COMMENTS  Highly flammable.

119,-

KJØP
This is a Tie Down Strap in Red from RC4WD.     FEATURES Woven fiber construction, red in color  Black anodized metal buckle  For use with scale roof racks   INCLUDES Tie Down Strap with Metal Latch   SPECIFICATIONS  Length: 15.7" (400mm)  Width: 0.13" (3.5mm)

139,-

KJØP
This is the King King Tow Shackle for the 1/10 scale Warn Hook. FEATURES: Heavy duty steel construction           Fits the 1/10 Warn Hook   INCLUDES: King King Tow Shackle   SPECS:    Outer Width: 0.49" (12.49mm)           Inner Width: 0.24" (6.21mm) at widest point

99,-

129,-

KJØP
-23%
XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake) Features: Trail-tuned XL-5 HV Waterproof Electronic Speed Control Fully waterproof design Five drive profiles Sport Mode — forward / brake / reverse Race Mode — forward / brake / no reverse Training Mode™ — 50% forward / 100% brake / 50% reverse (patented) Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake Traxxas EZ-Set® one-button setup Large, efficient heat sink Wide voltage latitude 6–7 cell NiMH (7.2–8.4V) and 2–3S LiPo (7.4–11.1V) Two stage low voltage protection (LVD) Specs: Input Voltage: 6–7 Cells NiMH, 2–3S LiPo Case Size: W31.2 x D55.4 x H26.4 mm Weight: 74 g Motor Limit: 21-turns (550 size) On Resistance Forward: 0.004 Ohms On Resistance Reverse: 0.004 Ohms Peak Current - Forward: 100A Peak Current - Reverse: 100A Braking Current: 60A Continuous Current: 18A BEC Voltage: 6.0 VDC BEC Current: 1A Power Wire: 14 Gauge / 127 mm Input Harness Wire: 26 Gauge / 368 mm Transistor Type: MOSFET PWM Frequency: 1700Hz Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off) Thermal Protection: Thermal Shutdown Single-button setup: Yes, Traxxas EZ-Set® Profile selection: Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, no REV Training Mode:* 50% FWD, 100% brakes, 50% REV Trail Mode: 100% FWD, 100% Brake, 100% REV, Trail-Tuned Brake on Neutral Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral * Patented  

899,-

949,-

KJØP
-5%
Axle Shaft Set Front Right TRX-4

129,-

KJØP
Spur gear, 45-tooth (TRX-4)

39,-

KJØP
Axle Shaft Set Front Left TRX-4

129,-

KJØP
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Mica Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Light Green Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
  This is a tube of Basic Type Tamiya Putty. FEATURES: Designed for use in repairing and modifying plastic models           May also be used for repairing and covering surface of metal and             wooden models           May be diluted with Tamiya Lacquer thinner before curing INCLUDES: 1.12oz (32g) Tube of Basic Type Tamiya Putty

49,-

KJØP
The newly-designed HUDY Pit Mat offers a large 750x1200mm anti-slip surface, perfect for a pit table or your workbench. The anti-skid foam construction is long-lasting & durable, making the Pit Mat lightweight and very easy to pack. The next generation pit mat is here today.

245,-

KJØP
Dette CA Cement Accelerator muliggjør raskere herding av CA lim. Påfør acceleratoren på den ene flaten og CA-sement til den andre. En sterk binding vil raskt dannes når de to flater presses sammen. Dette er ideelt for å feste små fotoetset deler eller deler med en meget liten sementeringsflate . Flasken har en pensel for å sikre enkel påføring.  Dette er en alkoholbasert akselerator som kan skade plastdeler. 1 flaske inneholder 10 ml.  

119,-

KJØP
 This is a 1/3oz Bottle of Plasti-Zap CA Glue from Pacer. FEATURES: Medium viscosity formula.           Cures clean and clear.           Will not attack paint.           Works on most plastics and vinyl.           Non-flammable and non-sniffable.           Permits rapid kit assembly in seconds. INCLUDES: One 1/3oz Bottle of Plasti-Zap CA Glue. SPECS:    1/3oz (9.47g)

69,-

KJØP
Tamiya spray paint is a type of synthetic lacquer that cures quickly and is extremely useful for painting large surfaces. Each can contains 100ml of paint, which is enough to fully cover 2 to 3, 1/24 scale car bodies. Tamiya spray paints do not react with acrylics or enamels, so details can be added using any type of paint you desire.

109,-

KJØP
 This is a 1oz Bottle of Slo-Zap CA Glue from Pacer.      Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Very high viscosity formula.           Super thick and super strong.           Allows approximately 30-40 seconds for part positioning.           Cures in 90 seconds.           Ideal for fillet forming, gap filling, wing sheeting, laminating,             etc.           Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Slo-Zap CA Glue. SPECS:    1oz (28.4g)

139,-

KJØP
This is a 180ml Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.     FEATURES Easy application.  This light gray primer has excellent coverage and is recommended for  use prior to painting a light color onto a darker colored material.  It can be used on plastic or metal.  Air spray can.  Color coded plastic lid.   INCLUDES One Can of Surface Primer L   REQUIREMENTS Well Ventilated Area   SPECIFICATIONS  Contains: 180ml

139,-

KJØP
Formula 560 is specially formulated to bond Canopies and Plastic parts to wood, fiberglass, paint, or MonoKote surfaces. FEATURES Safely bonds vinyl, ABS, Butyrate, and other plastics. Forms a firm, flexible clear bond that can withstand shock and vibration. INCLUDES One 2 ounce Bottle of White Glue COMMENTS Requires 3 hours drying time before parts can be handled, 24 hours for full cure.

89,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png