Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Lakk & Pensler / Tamiya Lakk / Tamiya TS hardplast / Tamiya 85046 Spray Lacquer TS-46 Light Sand 3 oz

Tamiya 85046 Spray Lacquer TS-46 Light Sand 3 oz

Art.nr: 85046

109,-

Tamiya

Tamiya
På lager: 4

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya.

FEATURES: Cures in a short period of time.
          Extremely useful for painting large surfaces.
          100ml is enough to fully cover two or three 1/24 scale sized car
            bodies.
          Tamiya spray paints are not affected by acrylic or enamel paints.
            Therefore, following the painting of the entire assembly, details
            can be added or picked out using enamel and/or acrylic paints.  By
            combining three different paints, the decoration of plastic
            models will become simpler and more effective.
         

INCLUDES: One 100ml Spray Can of Synthetic Lacquer Light Sand

REQUIRES: Eye, Lung and Skin Protection.

COMMENTS: Highly Flammable, Pressurized Container. 
          Keep out of the reach of children.

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

Hovedbilde Tamiya 85058 Spray Lacquer TS-58 Pearl Light Blue 3 oz
Tamiya 85058 Spray Lacquer TS-58 Pearl Light Blue 3 oz
This is Tamiya Color Spray Paint for Plastics (TS-58 Pearl Light Blue).                          For Adult Modelers Only. FEATURES: Extremely useful for painting large surfaces.           The paint is a synthetic lacquer that cures in a short period of time           Not affected by acrylic or enamel paints; therefore, details can be             added after painting.           Enough paint to fully cover 2 or 3, 1:24 scale sized car bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Paint (TS-58 Pearl Light Blue) SPECS:    Net Volume: 3.38oz (100ml) COMMENTS: Highly flammable.                              

109,-

På lager 10
KJØP
Hovedbilde Tamiya 81715 Acrylic Mini XF-15 Flat Flesh 1/3 oz
Tamiya 81715 Acrylic Mini XF-15 Flat Flesh 1/3 oz
 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Flesh paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

35,-

På lager 10
KJØP
Hovedbilde Tamiya 81793 XF-93 ACRYLIC MINI LIGHT BROWN DAK 1942
Tamiya 81793 XF-93 ACRYLIC MINI LIGHT BROWN DAK 1942
Tamiya 81793 XF-93 ACRYLIC MINI LIGHT BROWN DAK 1942

30,-

På lager 5
KJØP
Hovedbilde M-Drive Bag 3 - Cars/Trucks - L670 x W365 x H360mm Hovedbilde M-Drive Bag 3 - Cars/Trucks - L670 x W365 x H360mm
M-Drive Bag 3 - Cars/Trucks - L670 x W365 x H360mm
M-Drive RC Bag 3 - Crawler This 67 x 36.5 x 36cm black RC Vehicle bag from M-Drive is a lightweight case designed to safely store, transport & protect your 1/10 scale TRX-4 or TRX-6 crawler and it's transmitter/charger. Also fits most other 1/10 scale crawlers. Material Weather resistant, heavy-duty 600-denier nylon shell that can be cleaned with mild soap and a moist cleaning cloth. Crawlers The RC Bag 3 is a practical soft and lightweight bag that can store most 1/10 scale radio controlled crawlers such as Traxxas TRX-4 & TRX-6. It may also fit other simmilar sized crawlers/trucks. RC Garage Storage This RC Car Bag is a practical storage place in your home when you’re not in using it. The perfect RC Garage Storage solution! Weather Resistant A heavy-duty 600D nylon shell shields your RC equipment from moisture and dust. Shoulder Strap The removable, easily adjustable shoulder strap includes a cushioned shoulder pad for comfort. Side Handles Heavy-duty rubber grip side handles add lifting and carrying options. Removeable Divider The internal dividers are removeable and lets you store your vehicle transmitter, a charger and a few extra batteries etc. Inside Size: Length: 67cm Width: 36.5cm Height: 36cm Inside Size With Dividers: Main area: 67 x 27 x 36cm Secondary area(s): 67 x 8.5 x 36cm

799,-

849,-

På lager 1
KJØP
-6%
Hovedbilde M-Drive Bag 3 - PE Bottom Plate Hovedbilde M-Drive Bag 3 - PE Bottom Plate
M-Drive Bag 3 - PE Bottom Plate
M-Drive MD95013 - Bag-3 PE Bottom Plate - 650x360mm This is an accessory plate made of lightweight, but rigid, PE material that is made to make the M-Drive Bag-3 floor/bottom more rigid. Specs: Fits M-Drive Bag-3 (MD95003) Size: 650x360mm Thickness: 3mm Material: PE foam

69,-

På lager 2
KJØP
Hovedbilde Tamiya 35340 - 1/35 German IV Jagdpanzer / 70 (V) Lang Hovedbilde Tamiya 35340 - 1/35 German IV Jagdpanzer / 70 (V) Lang
Tamiya 35340 - 1/35 German IV Jagdpanzer / 70 (V) Lang
Tamiya 1/35 German IV Jagdpanzer / 70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas. Specs: Construction Type Assembly kit Decals Included Photo-Etch Parts Not included Scale 1/35 Special Feature 1 Depicts a vehicle manufactured after September 1944, when the use of anti-magnetic mine Zimmerit coating was discontinued. Special Feature 2 The long and imposing 70-caliber 7.5cm gun main barrel is molded in a single piece. Special Feature 3 Detailed depictions of different surface textures such as cast-iron mantle and welded sections. Special Feature 4 Belt-type tracks depict the lightweight caterpillars used on late production versions of the Lang. Special Feature 5 Front two rubber ring-less road wheels are faithfully depicted. Special Feature 6 Comes with 2 torso figures which can be attached in the fighting compartment hatches. Special Feature 7 Includes 3 marking options to depict Western (including Battle of the Bulge) and Eastern Front vehicles. Based on the actual vehicle coverage, the fearless form is modeled with a rich sense of reality. -The two front parts that are characteristic are realistically reproduced with steel road wheels. ● The equipment on the upper surface of the engine room, spare tracks, and vertical muffler are also highlights. ● Casting patterns such as shields and welding patterns of each part of the car body are also molded with high texture. ● The slide cover of the sight is movable so that it works with the left and right sides of the barrel.   Tamiya Color paints for painting the German Jagdpanzer IV /70 (V) Lang Tamiya Color Spray Colors (Item No.) Acrylic Colors (Item No.) Enamel Colors (Item No.) Red Brown TS-1 (85001) XF-64 (81764) XF-64 (80364) Dark Green TS-2 (85002) XF-61 (81761) XF-61 (80361) Dark Yellow TS-3 (85003) XF-60 (81760) XF-60 (80360)   Tamiya Color Acrylic Colors (Item No.) Enamel Colors (Item No.) Tamiya Color Acrylic Colors (Item No.) Enamel Colors (Item No.) X-7 Red 81507 80007 XF-49 Khaki 81749 80349 XF-1 Flat Black 81701 80301 XF-56 Metallic Gray 81756 80356 XF-2 Flat White 81702 80302 XF-65 Field Gray 81765 80365 XF-15 Flat Flesh 81715 80315 XF-84 Dark Iron 81784 80384 XF-16 Flat Aluminum 81716 80316 XF-85 Rubber Black 81785 80385 -A half-body image of the commander and loader is set. The hatch for each occupant is also movable.   

699,-

** Ikke på lager
KJØP
Hovedbilde Zap PT-102 PLASTI ZAP CA BRUSH ON 1/4 OZ
Zap PT-102 PLASTI ZAP CA BRUSH ON 1/4 OZ
 Medium viskositet for plast Ikke brennbar  Herder klart Vil ikke angripe maling Flott på de fleste plastmodeller, bil listverk og vinyl reparasjoner Fungerer best på: plast, gummi

59,-

** Ikke på lager
KJØP
Hovedbilde Airfix 1:72 Focke Wulf Fw190A-8 Hovedbilde Airfix 1:72 Focke Wulf Fw190A-8
Airfix 1:72 Focke Wulf Fw190A-8
Plastbyggesett i skala 1/72. Her vil du trenge lim til plastbyggesett, maling og pensel i tillegg.   Product Info First flying in 1939, the Focke-Wulf FW190 was an immediate threat to RAF fighters when introduced in late 1941, being faster and more manoeuvrable than the Spitfire V then in service.  The F-8 was the ground-attack version and differed primarily in its lack of outboard cannons. Various combinations of underwing weapons were fitted, but the most common was one centreline bomb and four small bombs on the wings.  The A-8 version was the most numerous, heavily armed variant and entered service in 1944 in an attempt to stop Allied daylight raids. By then, however, the new Allied fighters had begun to outclass it.  

149,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 35087 German Sturmgeschutz IV- 1/35 Hovedbilde Tamiya 35087 German Sturmgeschutz IV- 1/35
Tamiya 35087 German Sturmgeschutz IV- 1/35
Tamiya 35087 German Sturmgeschutz IV- 1/35   The Sturmgeschuetz (storm or assault gun) was developed in the 1936-39 period to provide armoured support for the infantry. This came about largely because the new tanks being produced were destined for the panzer (armoured) divisions. In a battlefield situation there was no guarantee that tanks from an armoured division would be available to support the infantry. Thus the idea of the assault gun regiment organic to an infantry division came about. The new assault gun developed was based on the Panzerkampfwagen III Designated Strumgeschuetze III, the assault gun had a low superstructure with its main armament mounted in the superstructure front and given limited travers. Pre-production vehicles were battle-tested in the invasion of France in May 1940, and then ordered into large scale production. The original idea was for a vehicle able to give fire support for the infantry, but it was soon discovered that an anti-tank capability was even more important. Later models of the StuG III led to the StuG 40 in early 1942, a StuG III with either a 7.5cm Sturmkanone 40 L/43 or (later) a Sturmkanone 40 L/48. In 1943, production of the Pzkpfw III was phased out as being at the end of its development as a gun tank. Because of the great losses of tanks on the Russian front General Guderian suggested that StuG III vehicles be issued to tank divisions as they were cheaper, simpler and quicker to build than tanks. This would have created an even bigger increase in StuG III output which was already insufficient to meet demands. So it was decided in a conference with Hitler in November 1943 to use the chassis of the Panzerkampfwagen IV. The object was to use this new Strumgeschuetze IV for the panzer divisions. This would greatly simplify maintenance as the panzer divisions. This would greatly simplify maintenance as the panzer divisions were all equipped with the Panzer IV tank. A prototype was already in a month, using a superstructure from StuG III production output. As the Panzer IV chassis was 46cm longer, and 8cm lower than the StuG III it was necessary to weld in an extra forward deckplate, and superstructure side strips, to fill the gaps. On the left front of the superstructure an armoured box (with two periscopes and a hatch) was built forward to cover the driving position. Production started in December 1943, Krupp-Gruson of Magdeburg the builders. Total production was about 1000 vehicles. StuG Ivs equipped the third battalions of some tank regiments in place of tanks. Early models were on the Pzkpfw IV Ausf H chassis but most were on the Ausf J chassis. Zimmerit anti-magnetic coating was common, and some had ferro-concrete added on the superstructure front for added protection. Crew: 4, combat weight 23 tons, top speed 24mph (road), 15mph (cross country), ammunition: 63 rds (AP 39, AP 40, HE), armour : 85mm (max) 10mm (min).  MERKE TAMIYA PRODUKT Plastbyggesett SKALA 1:35 TYPE TANKS TEMA MILITÆRT

259,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 87016 Pointed Brush (Medium)
Tamiya 87016 Pointed Brush (Medium)
Pointed Brush (Medium)

39,-

På lager 2
KJØP
Hovedbilde Tamiya 86029 PS-29 Polycarb Spray Fluorescent Pink 3 ...
Tamiya 86029 PS-29 Polycarb Spray Fluorescent Pink 3 ...
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-29 Fluorescent Pink).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

På lager 3
KJØP
Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

På lager 4
KJØP
-8%
Hovedbilde Tamiya 85022 Spray Lacquer TS-22 Light Green 3 oz
Tamiya 85022 Spray Lacquer TS-22 Light Green 3 oz
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Light Green Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

På lager 6
KJØP
Hovedbilde Tamiya 87137 Cement (ABS)
Tamiya 87137 Cement (ABS)
This new cement is specially formulated for use with ABS plastic parts such as the masts in 1/350 scale ship model kits, which cannot be attached with normal plastic cement. This cement can also be used to cement ABS plastic parts to styrene parts. The bottle’s cap has an applicator brush to ensure easy application. 1 bottle contains 40ml

89,-

På lager 6
KJØP
Hovedbilde Bronto Ladekabel - 4mm til T-Plug (Deans)
Bronto Ladekabel - 4mm til T-Plug (Deans)
Bronto Ladekabel - 4mm til T-Plug (Deans)   Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling.   Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2    T-plug (Deans) male

75,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 74076 Cutting Mat A3 Size
Tamiya 74076 Cutting Mat A3 Size
This is the Tamiya Cutting Mat A3 Size.     FEATURES Three layer design features a harder outer layer on the top & bottom  of the mat with a softer center layer  Perfect for cutting parts off of trees, cutting decals or any cutting  with a hobby kife that would damage your table  Metric rulers printed on the face make it easy to measure parts you  are cutting   INCLUDES One Cutting Mat   REQUIREMENTS Nothing is required   SPECIFICATIONS  Length: 17.75" (450mm)  Width: 12.75" (322mm)  Thickness: .80" (2mm)

259,-

279,-

På lager 3
KJØP
-7%
Hovedbilde Tamiya 86016 PS-16 Polycarbonate Spray Metal Blue 3 oz
Tamiya 86016 PS-16 Polycarbonate Spray Metal Blue 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

På lager 1
KJØP
-8%
Hovedbilde Tamiya 85047 Spray Lacquer TS-47 Chrome Yellow 3 oz
Tamiya 85047 Spray Lacquer TS-47 Chrome Yellow 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Chrome Yellow Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.                                                    

109,-

På lager 4
KJØP
Hovedbilde Traxxas 1647 Silicon Grease
Traxxas 1647 Silicon Grease
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 2514 Sponsor Decal Sheet
Traxxas 2514 Sponsor Decal Sheet
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 51406 Sand Scorcher 2010 White Body Set Hovedbilde Tamiya 51406 Sand Scorcher 2010 White Body Set
Tamiya 51406 Sand Scorcher 2010 White Body Set
RC BODY SET SAND SCORCHER 2010 This is the R/C 1/10 Scale Racing Buggy Sand Scorcher Body Parts Set from Tamiya. FEATURES: Molded white plastic construction Separately-molded parts for windows, driver, exhausts and side mirrors INCLUDES: One Sand Scorcher Body Parts Set One Decal Set REQUIRES: Installation on the vehicle SPECS:    Length: 337mm (13.3") Width: 185mm (7.3") Height: 125mm (4.9") COMMENTS: Fits the Sand Scorcher (2010) Chassis Can be used on the Buggy Champ Chassis if used with Sand Scorcher (2010) front posts

699,-

799,-

På lager 3
KJØP
-13%
Hovedbilde Tamiya 50197 Snap Pin Set 02/49/62/84/81 (Body clips) Hovedbilde Tamiya 50197 Snap Pin Set 02/49/62/84/81 (Body clips)
Tamiya 50197 Snap Pin Set 02/49/62/84/81 (Body clips)
This is a set of large and small snap pins(body clips) for any car or truck kit. FEATURES:  They are dark colored so may be easily lost in the dirt or on a            carpet track.  The small ones are straight so they may be sort of            difficult to grip, but the large ones are bent upward and they have            a large loop which makes them easy to grip. INCLUDES:  5- small snap pins(body clips)           10- large snap pins(body clips)

45,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

På lager 7
KJØP
-8%
Hovedbilde Tamiya 86034 PS-34 Polycarb Spray Bright Red 3 oz
Tamiya 86034 PS-34 Polycarb Spray Bright Red 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-34 Bright Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

På lager 5
KJØP
Hovedbilde Tamiya 81508 Acrylic Mini X-8 Lemon Yellow 1/3 oz
Tamiya 81508 Acrylic Mini X-8 Lemon Yellow 1/3 oz
   This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Lemon Yellow paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

På lager 8
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png