Hopp til innhold
-5%

Tamiya 47465 1/10 R/C Mercedes-Benz Unimog 406 Series U900 CC-02

Art.nr: 47465

3.795,-

3.995,-

- 5%
Tamiya

Tamiya

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tamiya 1/10 R/C Mercedes-Benz Unimog 406 Series U900 (Blue-Gray Painted Body) (CC-02)

This is a Limited-Edition kit of the Unimog 406 Series U900. This version includes a pre-painted body, unlike the standard kit in item 58692.

The multi-purpose Mercedes-Benz Unimog is a truck with unrivalled off-road performance and its name is an acronym which stands for the German description "Universal-Motor-Gerät." The 406, which also has the ability to equip any of approximately 3,000 attachments for every imaginable task, now is depicted on the proven Tamiya CC-02 chassis.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with red wheels and grippy block pattern tires.

• 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm.
• Pre-Painted Polycarbonate body (Tamiya PS-32 Corsa Gray) with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem.
• Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs.
• Propeller shafts (short: 76mm) included.
• The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability.
• A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear.
• Includes 540-brushed type motor.
• LED lights included.
• Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.

 

 Requires:

  • 2-channel radio 
  • Steering servo 
  • 7.2-7.4volt battery pack and compatible charger.

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Reservedeler

Relaterte produkter

 

Art.nr: 58692
Copied
TAMIYA RC MERCEDES-BENZ UNIMOG 406 UNIMOG 406 SERIES U900 (CC-02) Description: The multi-purpose Mercedes-Benz Unimog is a truck with unrivalled off-road performance and its name is an acronym which stands for the German description "Universal-Motor-Gerät." The 406, which also has the ability to equip any of approximately 3,000 attachments for every imaginable task, now is depicted on the proven Tamiya CC-02 chassis. CC-02 Chassis - Off Road, Evolved Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with red wheels and grippy block pattern tires. • 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • Polycarbonate body with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Includes 540-brushed type motor. • Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Requires: 2-channel radio steering servo, 7.2-7.4volt battery pack compatible charger Tamiya PS polycarbonate paint   SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushings & Metal bearings Body Material Polycarbonate Body Stickers Included Chassis Material FRP Fiberglass Reinforced Plastic Chassis Type CC02 Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Motor 540-brushed type Requires A 2-channel radio, steering servo, ESC, 7.2-7.4 volt battery & battery charger, and Tamiya PS (polycarbonate spray paint) Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-Link Rigid Suspension (Front & Rear) Terrain Use Multi-Purpose

3.495,-

3.895,-

KJØP
-10%

Kunder kjøpte også

 These are Ball Bearings from Tamiya. FEATURES: Usable with Tamiya's TT-01 chassis cars (Expert Built).           Ball bearings are the most essential part for tuning up your R/C             car. Enables heightened top speed and longer component life.           Sealed, stainless steel ball bearing set.           #1150 bearings are used with spur gears.           #1280 bearings are used with differential gears. INCLUDES: (12) #1150 5 x 11 x 4 mm Ball Bearings            (4) #1280 8 x 12 x 3.5 mm Ball Bearings REQUIRES: To replace bearings refer to TT-01 chassis instruction manual

279,-

KJØP
  This is a tube of Basic Type Tamiya Putty. FEATURES: Designed for use in repairing and modifying plastic models           May also be used for repairing and covering surface of metal and             wooden models           May be diluted with Tamiya Lacquer thinner before curing INCLUDES: 1.12oz (32g) Tube of Basic Type Tamiya Putty

49,-

KJØP
These are Clamp Type 6mm Aluminum Wheel Hubs by Tamiya.  Fits TA04, TA03, TL-01 and F201 chassis cars.     FEATURES Plain silver aluminum construction (all parts).  High round cap head screws with a hexagon socket drive insert.  These wheel hubs are fastened with cap screws and prevent the 2x10mm  shaft from falling out as well as realize precise wheel attachment.  Illustrated reference guide.   INCLUDES (4) Wheel Hubs  (5) Shafts  (5) Cap Screws  (1) 1.5mm Hex Wrench   SPECIFICATIONS Wheel Hubs - Cap Screws -  Thickness: 6mm Diameter: 1.6mm  Inner Diameter: 2.5mm Length: 4mm  Outer Diameter: 12mm  Shaft Size -  Length: 10mm  Diameter: 2mm

269,-

KJØP
These are steel gearbox joint shafts which replace the kit standard plastic parts for increased performance and durability. They must be used in conjunction with item 53792 RC Universal Shaft Assembly set. Compatible with the TT-02 chassis when item 53792 RC Universal Shaft Assembly is used. Gearbox joints x2

119,-

KJØP
Features: Viscosity 1000CPS / 73WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

99,-

KJØP
14 kanals mottaker til Carson Reflex 14 CH LCD

849,-

899,-

KJØP
-6%
This plastic shock set includes 4 CVA oil-filled dampers and medium black springs. The short black springs are denoted with a yellow paint mark to denote its medium spring rate for easy identification. When fitted onto any of Tamiya’s TT-01 or TT-02 chassis machines, they will improve stability and help the car hold uneven surfaces. This set is ideal for beginners or first-time upgraders! Contains parts to make 4 CVA Super Mini oil shock dampers. Includes 4 black (medium) springs denoted with a yellow paint mark.

279,-

319,-

KJØP
-13%
Rossi Glow Plug R3 Medium 1x Glow Plug in the pack.

145,-

KJØP
XT60 PAIRS INCLUDING HEAT SHRINK (10PCS)

249,-

KJØP
This is a spare body parts set of the Subaru WRX STI NBR. It is designed to fit any of Tamiya’s 190mm wide touring car platforms.   Features: For: 257mm Wheelbase Touring Car Clear Body Material: Polycarbonate Clear protective film to prevent overspray: Yes Pre-drilled mounting holes: No Made of durable polycarbonate material. Comes with marking stickers to depict numerous sponsor logos. Separately-molded side mirror parts and wing parts included, plus window masking stickers. Compatible with 257mm wheelbase touring car chassis.   Specifications: Width: 190mm Wheelbase: 257mm   Includes: Tamiya 1/10 Subaru WRX STI NBR Challenge Clear Body (1 pc) Decals Wing Parts Mirror Parts Window Masking Sticker Instruction

499,-

529,-

KJØP
-6%
GT Power GTP100 L8 Model Car LED   Lyssett med 8stk kraftige super bright LED. Key Features Input Voltage DC 3.6V – 8.4V Max Current 220mA What’s in the Box 2x 10mm White LEDs with 350mm lead 2x 10mm Red LEDs with 350mm lead 2x 6mm White LEDs with 350mm lead 2x 6mm Red LEDs with 350mm lead 1x Receiver lead 280mm long For Power

149,-

KJØP
★This 0.8mm thickness polycarbonate set features a chassis cover and wheel well liners to protect your TT-02 chassis from the intrusion of dust and dirt, reducing damage and easing your maintenance of the model. ★Also included is a cover for the receiver switch and touch fastener tape. ★Not for use with Item 54549 and 54733 with short wheelbase cars.

189,-

199,-

KJØP
-5%
Radient MT30 Pairs Inc Cable Cap (5Pcs)

249,-

KJØP
TAMIYA RC COMICAL HORNET The original Hornet needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Hornet is still among TamiyaΓÇÖs best-selling kits to this day. Now the legend is re-imagined as the Comical Hornet, with a new body inspired by the famous original. The re-imagined body, which includes a newly designed driver figure, sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. WR-02CB Chassis - Great Fun Awaits! The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save hassle in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while underguard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive. • 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm. • Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up. • Polycarbonate body with sticker design based on the original Hornet. • Orange and white 2-piece wheels use bubble tires (front: ribbed, rear: round block) • Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components. • Comes with a newly designed helmeted driver figure with hands gripping a steering wheel. • Suspension arms feature multiple damper attachment holes for easily adjustable performance. • Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) • Includes 540-type brushed motor. • Internal Gear Ratio: 18.3:1 • Includes wheelie bar.   Requires: 2-channel radio steering servo 7.2-volt battery pack & chargera Tamiya PS/TS paint. NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment.   SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type WR-02CB Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Led Lights Not Included, but sold separately Motor Brushed 540 Type Required To Complete 2-channel radio, steering servo, 7.2volt round case battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-wheel fully independent double wishbone Terrain Use Multi-Purpose  

2.195,-

2.295,-

KJØP
-4%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png