Hopp til innhold

Scalextric C8526 Track Extension Pack 4

Art.nr: C8526

399,-

Scalextric

Scalextric

På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Scalextric Track Extension Pack 4 C8526. Pakke med 4 stk 350mm rette skinner. Perfekt utvidelsepakke for å lage en større bilbane.

Inneholder:

4 x rette skinner 350mm

Produsent

Kunder kjøpte også

Honda Civic Type R Tilbake til BTCC for 2021 etter en årrekke i World Touring Car Series, har Gordon Shedden hoppet rett tilbake i kampene i fronten. Til tross for uflaks gjennom hele kampanjen, har Gordons hastighet aldri vært i tvil, og han er fortsatt en sjåfør som mange frykter når de ser ham lyse i speilene deres.

799,-

849,-

KJØP
-6%
Extending your Scalextric layout has never been easier. The seven Scalextric Track Extension Packs are totally flexible in their design. Any of these packs can be added to Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit. You could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces. The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts   Features - 'One size fits all' concept- Compatible with Standard and Digital sets- Fits any sized layout  Contents - 1 x Leap (Ramp up and down)- 2 x Standard Straight Track- 2 x Hairpin Curves- 2 x Quarter Straight Track- 4 x Side Swipes- Borders and Barriers  Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

1.095,-

1.195,-

KJØP
-8%
Scalextric Digital Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! F1 EasyFit Digital Plug Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to perform. To Convert a DPR car 1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug. 3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis. Features The F1 EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Note C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006. * Four car and six car powerbases available

329,-

KJØP
FLYSKY GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries! Features: • Reliable, interference free 2.4GHz AFHDS signal operation • 3CH operation • Rechargeable li-ion transmitter battery • Interchangeable rubber hand grips • Adjustable steering dual-rate • Servo reversing Transmitter Specs: Model: Car/Boat RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Low Voltage Warning: Yes Charge Port: Yes (USB- charge cable included) Power: 3.7V 800mAh li-ion (included) Weight: 270g Receiver Specs: Model: Car/Boat RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Failsafe: Yes Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 5g Antenna Length: 26mm Dimensions: 37.6 x 22.3 x 13mm Includes: FS-GT2B transmitter FS-GT2B 3CH receiver 3.7V li-ion rechargeable battery pack Optional second rubber hand grip Antenna tube USB charge cable Bind plug User manual

579,-

699,-

KJØP
-17%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Use to create exciting bottleneck section or combine with C8201 Radius 1 Hairpin Curve 90° to create a tight and perilous hairpin. Contents 2 x 350mm Side Swipe Straights Push-fit Scalextric track for quick and easy circuit building . Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

323,-

KJØP
Scalextric Straight Crossover 90° (1 stk) C8210. Dette gjør løpet ekstra spennende og morsomt. Klarer du å unngå å bli krasjet i eller om du har lyst til å krasje og dytte ut din konkurrent ut av banen. Fin baneutvidelse som øker spenningen og som tillater nye spennende måter å sette opp din Scalextric 1:32 bilbane.

489,-

549,-

KJØP
-11%
This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Front or rear application INCLUDES: One left suspension arm           One right suspension arm REQUIRES: Installation on suspension assembly SPECS:    Length: 100mm (3.94")           Width: 45mm (1.77")           Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

KJØP
-7%
  Pågybbingssett for Scalextric 1:32 bilbaner. Alle Scalextric "Expansion packs" kan brukes sammen med alle Scalextric 1:32 bilbaner. En rask måte å utvide din bilbane!  Inneholder: 2x Hairpin curves (innsnevret sving) 2x Side swipes (innsnevringer) Borders & barriers 

619,-

679,-

KJØP
-9%
Yeah Racing Plastic Power Switch For Traxxas TRX-4  #TRX4-055 Description: Hate taking off the body to switch your Traxxas esc on or off? Use this extension for the button for easy power up and down. The lever tucks neatly underneath the rock slider and will not come into contact with rocks for accidental power downs.   Feature: For: Traxxas TRX-4 TRX-6 Material: Plastic Color: Black/Red Include: Switch Extension (1 pc) Mounting Tape (2 pcs) Mounting Hardware (1 pack)

109,-

KJØP
Short Straight 78mm (2 Per Bag)

199,-

KJØP
Extending your Scalextric layout has never been easier. The seven Scalextric Track Extension Packs are totally flexible in their design. Any of these packs can be added to Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit. You could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces. The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts   Features - 'One size fits all' concept- Compatible with Digital and Standard sets  Contents - 8 x Radius 3 Curve 22.5°   Replaces C8555.

449,-

649,-

KJØP
-31%
Scalextric C8228 - Boarders Radius 2 outer - 4stk  

219,-

KJØP
RAD 1 INNER BORDERS & BARRIERS (FOR C8201)

179,-

KJØP
Pakke med 2 stk radie 1 kurve. 45° grader per sving (totalt 8 i en sirkel).

179,-

KJØP
5 x 330mm Barriers (Length 330mm) 15 x Barrier Clips

169,-

KJØP
Track Extension Pack 1 Å utvide din Scalextric bilbane har aldri vært lettere. De sju utvidelses pakkene til Scalextric er veldig fleksible i sitt design. Alle av disse Extensions pakkene kan legges til enhver som helst bane og utvider banen til en enda heftigere opplevelse. Alle Track Extensions Packs er fullt kompatible med både standard og digitalt oppsett. En eller flere Track Extension Packs kan legges til samme bane samtidig. Alle pakkene sammen lager et imponerende antall forskjellige banevarianter.  Spesifikasjoner: ´One size fits all "-konseptet. Kompatibel med digitale og standard sett. Passer alle baner i 1:32 serien. Innholder: 2 x Racing svinger Rekkverk og barrierer

549,-

649,-

KJØP
-15%
Scalextric Track Extension Pack 5 Extending your Scalextric layout has never been easier. The seven Scalextric Track Extension Packs are totally flexible in their design. Any of these packs can be added to Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit. You could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces. The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts Features: - "One size fits all" concept - Compatible with Digital and Standard sets Contents: - 8 x 350mm Straights 

699,-

749,-

KJØP
-7%
  Braid pack (6 stk børster)

59,-

KJØP
Scalextric Track support & Clip pack. Bygg broer og opphøyninger på banen din. Pakken inneholder 20x broelementer som kan settes sammen til ulike høyder av brostøtter. Det medfølger også 10x fester mellom brostøttene og skinnene. Inneholder: 20 stk broelementer 10 stk fester mellom brostøttene og skinnene

199,-

239,-

KJØP
-17%
  Round Guide Blade 4 Braid Plates 1 Screw 

79,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png