Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servoer / Savox Servoer / Savox SB-2274SG Servo 25Kg 0,08s HV Brushless Black 1/8 Buggy
-7%

Savox SB-2274SG Servo 25Kg 0,08s HV Brushless Black 1/8 Buggy

Art.nr: SB-2274SGTY

1.395,-

1.495,-

- 7%
Savox

Savox
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

SAVÖX SB-2274SGBE - High Voltage Brushless Steel-Geared High Speed/Torque Servo

The Savox SB-2274SGBE High Voltage Brushless Digital Servo combines leading edge technology with super high 12 bit (4096) resolution.

Features:

  • Black Edition
  • High Voltage
  • Unique steel gear train
  • Brushless motor for smooth operation and efficiency
  • Ideal for 1/10, 1/8 buggies, and large scale aircraft
  • Sanwa SSR Mode Compatible


Specifications:

  • Torque @ 6V: 20kg/cm
  • Torque @ 7.4V: 25kg/cm
  • Speed @ 6V: 0.105 sec/60 deg
  • Speed @ 7.4V: 0.08 sec/60 deg
  • Dimensions L x W x H: 40.3 x 20.2 x 38.7mm
  • Weight: 69g


Technical Details:

  • Operating Temperature: -10° to 50°C
  • Running Current (no load): 180mA @6.0V, 220mA @7.4V
  • Stall Current (at locked): 6000mA @6.0V, 7400mA @7.4V
  • Idle Current: 5mA @6.0V, 5mA @7.4V
  • Wire Length: 300 +/- 5mm
  • Output Gear Spline: 25 Tooth
  • Bearings: 2BB
  • Operating Travel: 100° (1000 → 2000 µ second)
  • Neutral Position: 1500 µ second
  • Pulse Width Range: 800 → 2200 µ second
  • Maximum Travel: Appx 130° (900 → 2100 µ second)
  • Refresh Rate: 333 Hz
  • Motor Type: Brushless

Produsent

Savox

Savox

Kunder kjøpte også

Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector
Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
Hovedbilde Castle Creations CC BEC 10A 6S Switching Regulator
Castle Creations CC BEC 10A 6S Switching Regulator
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
Hovedbilde Hudy 106230 Bearing Oil
Hudy 106230 Bearing Oil
  High-quality HUDY Bearing Oil is used to lubricate bearings for ultra-smooth operation and long lifespan. Very good for use on dusty tracks and carpet tracks because it helps combat the effects of dust and carpet hair contamination. Super thin to help promote quick penetration and fast & easy coverage. Recommended for use immediately after bearing cleaning (e.g. with spray cleaner).       (11)

99,-

Ikke på lager
Hovedbilde Hudy 107601 Limited Edition Body Reamer (Small)
Hudy 107601 Limited Edition Body Reamer (Small)
This is the Hudy Limited Edition Body Reamer. This super-lightweight, professional-quality reamer for lexan bodies cuts perfect holes from 0-9mm (0-0.35”) with special CAD-designed cutting blades. The blades are hand-ground on a specially-modified grinding machine for maximum sharpness and lifespan. Laser-engraved measurements in both Imperial and Metric sizes indicate the hole size while reaming, making it easier to make precise holes. The CNC-machined Swiss 7075 T6 aluminum handle features a diamond pattern surface for unsurpassed grip, while the handy aluminum cover protects the blade. The handle includes a black plastic cap that is press fit into the handle end. Optional color-coded plastic caps (violet, red, blue) are available to customize the tools to your specifications.       (11)

499,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png