Hopp til innhold

RPM 73372 Heavy 4-40 Rod Ends (12)

Art.nr: 73372

59,-

RPM

RPM

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These heavy duty rod ends are made from injection molded black nylon and fit
Associated or Losi .168 suspension balls.

Produsent

Kunder kjøpte også

Wheels, dished 2.2" (white) (2)

79,-

** Ikke på lager
KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

På lager 3
KJØP
        This is the optional 55T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 55T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 30mm (1.2")           Inner Diameter: 5.5mm (0.22")           Width: 7.2mm (0.28")

39,-

På lager 3
KJØP
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm)  

39,-

På lager 4
KJØP
This is the optional Center Differential Kit for use on the                  Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Center Differential Kit REQUIRES: Installation on the vehicle  

259,-

Ikke på lager
Ikke på lager
Team Associated 6932 Screws, 4-40 x 5/16 in SHCSA Part # 6932 Pkg Qty 6 Fits: This part fits the following vehicles: B44.3 RC10 Classic RC10 World's Car RC10B44.1 RC10B44.2 RC10T3 SC10B This part fits the following other parts: #6002RR - Limited Edition RC10 Worlds Car Race Roller

39,-

På lager 2
KJØP
Team Associated 6288 Screws, 4-40 x 1/4 in BHCS Part # 6288 Pkg Qty 6 Fits: This part fits the following vehicles: B44 B44.3 RC10 Classic RC10 World's Car RC10B3 RC10B4.2 RC10B44.1 RC10B44.2 RC10T4.2 RC10T4.3 SC10.2 SC10.3 JRT SC10.3 Lucas Oil SC10GT This part fits the following other parts: #6002RR - Limited Edition RC10 Worlds Car Race Roller

39,-

På lager 1
KJØP
   This is the ProLine Scale Accessory Assortment #10. FEATURES: For 1/10 scale rock crawlers           Plastic construction           Hand painted detail INCLUDES: Two scale Short and Long Drive Shafts           Two scale Axles           Scale Air Locker with Ring Gear Detail           Scale Pinion Gear           Scale Portable Air Compressor

269,-

569,-

På lager 9
KJØP
-53%
Yeah Racing Aluminum Big Bore Go 65mm Damper Set 2pcs for 1/10 RC Offroad Buggy Blue Description: Big Bore Go! Purchase this set of big-bore shocks, add oil, and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine-tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust how the shock reacts to the shock oil. *Photos for reference only. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (2 pcs) Soft Springs - Red (2 pcs) Medium Springs - Yellow (2 pcs) Hard Springs - Blue (2 pcs) Pillow Balls (4 pcs) Ballstuds (4 pcs) Threaded Ballstuds (4 pcs) Pistons (4 pcs)

249,-

** Ikke på lager
KJØP
Yeah Racing Aluminum Big Bore Go 65mm Damper Set 2pcs for 1/10 RC Offroad Buggy Black Description: Big Bore Go! Purchase this set of big-bore shocks, add oil, and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine-tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust how the shock reacts to the shock oil. *Photos for reference only. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (2 pcs) Soft Springs - Red (2 pcs) Medium Springs - Yellow (2 pcs) Hard Springs - Blue (2 pcs) Pillow Balls (4 pcs) Ballstuds (4 pcs) Threaded Ballstuds (4 pcs) Pistons (4 pcs)

249,-

269,-

På lager 1
KJØP
-7%
Yeah Racing Aluminum Big Bore Go 55mm Damper Set 4pcs for 1/10 RC Touring Car Black Description: Big Bore Go! Purchase this set of big-bore shocks, add oil, and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine-tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust how the shock reacts to the shock oil. *Photos for reference only. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (4 pcs) Soft Springs - Red (4 pcs) Medium Springs - Yellow (4 pcs) Hard Springs - Blue (4 pcs) Pillow Balls (8 pcs) Ballstuds (8 pcs) Threaded Ballstuds (8 pcs) Pistons (8 pcs)

439,-

459,-

** Ikke på lager
KJØP
-4%
Yeah Racing Heavy Anchor for Crawler Winch CR01-27 This is the Yeah Racing Winch Anchor, comes complete with a hook so you can attach it to any of our tow hooks! This device is used with your winch to help give you a winch point when a tree is not near. Install this device on a point so it grips into the ground and it will help to get your truck from any bad spot!   Features: For: Crawler Winches Material: Steel Color: Black/Red   Includes: Heavy Anchor for Crawler Winch (1 pc) Tow Hook Attachment Ring (1 pc)

89,-

99,-

På lager 1
KJØP
-10%
A133 - BALL 5.8x6mm (4pcs) THIS PART FITS THE FOLLOWING KITS / PARTS: Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux SWAY BAR SET (FRONT/REAR/SAVAGE X) NITRO RS4 MT 2 Nitro MT2 G3.0 Nitro MT 2 18S NITRO RS4 MT 2 18SS+ KIT WITH DIRT Hellfire RTR Hellfire SS Super 5SC Flux WR8 3.0 Ford Fiesta Abu Dhabi Bullet ST 3.0 w/ 2.4GHz Bullet MT 3.0 w/ 2.4GHz RTR Bullet ST Flux W/ 2.4GHz Bullet MT Flux w/ 2.4GHz WR8 Flux Rally Savage XS SS Ken Block WR8 with Ford Fiesta H.F Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Ken Block 2013 GRC WR8 Flux KEN BLOCK 2013 GRC WR8 3.0 WR8 FLUX KEN BLOCK 2014 FORD FIESTA WR8 3.0 KEN BLOCK FORD FIESTA ST WR8 Flux Ken Block 2015 Ford Fiesta WR8 3.0 Ken Block 2015 Ford Fiesta VENTURE TOYOTA FJ CRUISER GREY COMPLETE SHOCK SET (4 SHOCKS) VENTURE TOYOTA FJ CRUISER VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE WR8 FLUX KEN BLOCK GYMKHANA FORD WR8 3.0 KEN BLOCK GYMKHANA FORD Super Nitro Rally RS4 MT Nitro MT NITRO RUSH EVO Nitro Rush Optional part used in the following models: Cyber 10B RTR CRAWLER KING WITH JEEP WRANGLER RTR CRAWLER KING WITH LAND ROVER RTR WHEELY KING TRUCK / BOUNTY RTR WHEELY KING TRUCK / BOUNTY Wheely King 4x4 RTR WHEELY KING TRUCK with MINI Wheely King Wheely King 4x4 RTR WHEELY KING 4X4 TRUCK with MINI

59,-

** Ikke på lager
KJØP
  This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System.    It features a higher torque motor for the new 3.3 race series engines. FEATURES: Simple push-button starting for glow plug and starter motor.           LED status for both glow plug and starter motor           All-in-one Hand-held starter/battery holder           Hand-held starter features easy plug-in connection           Hand-held starter features an integrated belt-clip for portability INCLUDES: One Hand-held starter/battery holder           One wire harness with plug-in connector           One gear reduction unit with attached starter motor           Three 3x12mm button-head screws featuring a hex-drive REQUIRES: 7.2 volt 6-cell battery with Tamiya connector SPECS:    Starter Motor Size: 380 size High Torque motor           Hand-held starter length: 6.375" (162mm)           Hand-held starter width:      2" (51mm)

599,-

** Ikke på lager
KJØP
These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between wheel hubs and front bulkheads SPECS:    Length: 4.7" (120mm)           Diameter: 0.20" (5mm) COMMENTS: Fits only the 3.3 version of the T-Maxx.

119,-

På lager 2
KJØP
   This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES: 4 snap-in adjustment positions to control degree of wheelie action             easily removable if additional control isn't needed           Constructed of hardened plastic, black in color INCLUDES: Wheelie Bar Arm with four Shoulder Screws REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only.          

119,-

129,-

Ikke på lager
Ikke på lager
-8%
 1/2-OFFSET - 4WD FRONT & REAR Fits: Traxxas SUMMIT Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Front & Rear HPI SAVAGE X 4.6 Front & Rear Kyosho Mad Force Kruiser 4WD Front & Rear Kyosho FO-XX VE 4WD Front & Rear Kyosho FO-XX GP 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes Traxxas E-REVO Front & Rear Also fit these Trucks if you want a wider stance (width): Traxxas E-Maxx Front & Rear (if converting to 17 mm hexes) Traxxas E-Maxx Brushless Front & Rear Traxxas E-REVO Front & Rear (if converting to 17 mm hexes) Traxxas E-REVO Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas T-Maxx 3.3 Front & Rear (if converting to 17 mm hexes) Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear Specs: Wheel diameter: 3.8" Tire Diameter: 171 mm Tire Width: 109 mm Weight (each): 428 g Hex: 17 mm Offset: +1/2" Tire Compound: Sport Wheel finish: Black Nylon

579,-

599,-

** Ikke på lager
KJØP
-3%
This is (12) long Heavy duty rod ends that can be used on the RC10 and Losi series of cars. Features: (12) Rod ends that are used through-out the vehicle (such as tierods)   Includes: (12) rod ends with a 4-40 threaded hole.

59,-

** Ikke på lager
KJØP
 These are the 4-40 Blue Heavy Duty, Long Shank Rod Ends from RPM. FEATURES: Dress up your control rods with these brightly colored rod ends.           Flattened sides on shaft allow installation with pliers or wrench.   INCLUDES: Twelve 4-40 Long Shank Rod Ends, Neon Blue in color.   REQUIRES: 4-40 size threaded rods.   SPECS:    Length:                  1" (26mm)           Width at rounded end: 5/16" (8mm)           Diameter:             0.21" (5.5mm)

59,-

** Ikke på lager
KJØP
This is the optional Clear Body for the Traxxas Summit. FEATURES: Highly detailed body and cutting lines INCLUDES: Clear body for the Traxxas Summit with decal sheet REQUIRES: Lexan safe paint for painting the inside of the body. The color choice is up to the modeler. Hobby knife or scissors to cut out the decals. SPECS:    Length: 515mm (20.3") Width: 215mm (8.5") Height: 140mm (5.5") COMMENTS: This body has a protective overspray film which must be removed after painting       (B4)

319,-

349,-

Ikke på lager
Ikke på lager
-9%
These are 5mm Ball Studs from Tamyia.    FEATURES: Brass colored metal (not steel or aluminum) INCLUDES: Ten (10) ball studs REQUIRES: A 5.5mm wrench to install SPECS: Length: 12mm overall 5mm thread length     Diameter: 4.73mm ball 3mm thread diameter COMMENTS: These are use in a wide variety of applications.

69,-

På lager 5
KJØP
The adjustable upper arm set allows you to adjust the camber and toe-in angles in your vehicle by using the different spacers included in the set.                                                                                          Specs & Features Can be used with M-03, M-04, & M-05 chassis machines.

129,-

** Ikke på lager
KJØP
            This is the Transmission Gear Cover and Plug for the             Pro-Line Performance Transmission for the          Traxxas 2WD Slash, Electric Stampede, Bandit, and Rustler. FEATURES: Clear gear cover           Rubber plug INCLUDES: Transmission Gear Cover and Plug

99,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png