Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 2wd / RPM 81005 Rear Bumper for Slash 2WD - Blue Replaces TRX 5936

RPM 81005 Rear Bumper for Slash 2WD - Blue Replaces TRX 5936

Art.nr: 81005

159,-

RPM

RPM
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RPM Rear Bumper for Slash 2WD - Blue Replaces stock Traxxas #5936


Quick Notes:

  • Replaces stock Traxxas #5936
  • Fits the Slash 2wd (standard and LCG chassis) only
  • Does not fit the Nitro Slash
  • Optional Mud Flaps
  • Optional Low Visibility Wheelie Bar
  • Optional Tail Light Set


After releasing our front bumper for the Traxxas Slash, we immediately started receiving customer requests for an RPM rear bumper. In typical RPM fashion, we don’t just make replacement parts; we make the best replacement parts possible! What sets the RPM rear bumper above all else? We started with our incredibly durable materials and created a bumper that is based off of current full-sized Short Course and Baja style rear bumpers. Full-sized rear bumpers are wide and flat and our scale version is exactly that, for the ultimate in rear-end protection. RPM rear bumpers will stop most rear impacts from affecting the truck in any negative way.

Additionally, RPM rear bumpers for the Traxxas Slash weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster.

What more could we do to make these things incredibly realistic? How about mounting points for mud flaps? That’s right; these bumpers come stock with mounting positions for RPM Mud Flaps (#81012 – available separately). Now the Slash owner can run mud flaps for ultra-realistic good looks.

RPM rear bumpers for the Traxxas Slash are available in three popular color options – black, blue and chrome. RPM rear bumpers are sold with all necessary mounting hardware and complete mounting instructions.

Tech Notes: This bumper will not fit the Traxxas Nitro Slash 2wd nor will it fit the Slash 4×4. RPM highly recommends the use of an RPM rear bumper mount (#80902 or #80905) for full rear-end crash and bash-proof protection.

Produsent

RPM

RPM

Relaterte produkter

 

Hovedbilde RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4 Hovedbilde RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4
RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4
Art.nr: 81012
Copied
RPM Mud Flap System for Slash 2WD & Slash 4×4 Quick Notes: For use with RPM Slash 2WD and Slash 4×4 Rear Bumpers only The Traxxas Slash is arguably one of the best and most authentic replicas of a modern Short Course Truck. Unfortunately, it lacks in a critical detail that many other manufacturers have incorporated into their trucks – mud flaps! That is no longer an issue! RPM now has a mud flap system that integrates with our Rear Bumper for the Traxxas Slash 2wd (RPM #81002, #81003 & #81005) and Slash 4×4 (RPM #80122, #80123 & #80125). The RPM Mud Flap System uses a pair of molded nylon support arms that bolt to pre-existing holes in the RPM bumper supports of our Slash rear bumpers. These support arms hold a set of well-designed rubber mud flaps that incorporate the molded RPM Logo on one side and are blank on the other. One final touch is a pair of molded screw supports that help prevent the screws from pulling through the soft rubber of the mud flaps. Tech Notes: The RPM Mud Flap System is designed to work with RPM Rear Bumpers for the Traxxas Slash 2wd (RPM #81002, #81003 & #81005) & Slash 4×4 only (RPM #80122, #80123 & #80125). They will not work with stock or other aftermarket rear bumpers.

149,-

Ikke på lager
Hovedbilde RPM 80902 Rear Bumper Mount Black Slash / Rust / Stmpd ...
RPM 80902 Rear Bumper Mount Black Slash / Rust / Stmpd ...
Art.nr: 80902
Copied
Mount for Rear Bumper or Wheelie Bar for the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit replaces Traxxas stock #3677 Quick Notes: – fits the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit – replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

KJØP
Hovedbilde RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ... Hovedbilde RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ...
RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ...
Art.nr: 80905
Copied
RPM Mount for Rear Bumper or Wheelie Bar for 2WD Slash, Rustler, Stampede & Bandit - Blue Replaces Traxxas stock #3677 Quick Notes: Fits Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

KJØP
Hovedbilde RPM 81002 Rear Bumper for Slash 2WD - Black Replaces ... Hovedbilde RPM 81002 Rear Bumper for Slash 2WD - Black Replaces ...
RPM 81002 Rear Bumper for Slash 2WD - Black Replaces ...
Art.nr: 81002
Copied
RPM Rear Bumper for Slash 2WD - Black Replaces stock Traxxas #5936 Quick Notes: Replaces stock Traxxas #5936 Fits the Slash 2wd (standard and LCG chassis) only Does not fit the Nitro Slash Optional Mud Flaps Optional Low Visibility Wheelie Bar Optional Tail Light Set After releasing our front bumper for the Traxxas Slash, we immediately started receiving customer requests for an RPM rear bumper. In typical RPM fashion, we don’t just make replacement parts; we make the best replacement parts possible! What sets the RPM rear bumper above all else? We started with our incredibly durable materials and created a bumper that is based off of current full-sized Short Course and Baja style rear bumpers. Full-sized rear bumpers are wide and flat and our scale version is exactly that, for the ultimate in rear-end protection. RPM rear bumpers will stop most rear impacts from affecting the truck in any negative way. Additionally, RPM rear bumpers for the Traxxas Slash weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster. What more could we do to make these things incredibly realistic? How about mounting points for mud flaps? That’s right; these bumpers come stock with mounting positions for RPM Mud Flaps (#81012 – available separately). Now the Slash owner can run mud flaps for ultra-realistic good looks. RPM rear bumpers for the Traxxas Slash are available in three popular color options – black, blue and chrome. RPM rear bumpers are sold with all necessary mounting hardware and complete mounting instructions. Tech Notes: This bumper will not fit the Traxxas Nitro Slash 2wd nor will it fit the Slash 4×4. RPM highly recommends the use of an RPM rear bumper mount (#80902 or #80905) for full rear-end crash and bash-proof protection.

159,-

Ikke på lager
Hovedbilde RPM 81003 Rear Bumper for Slash 2WD - Chromed Replaces ... Hovedbilde RPM 81003 Rear Bumper for Slash 2WD - Chromed Replaces ...
RPM 81003 Rear Bumper for Slash 2WD - Chromed Replaces ...
Art.nr: 81003
Copied
RPM Rear Bumper for Slash 2WD - Chromed Replaces stock Traxxas #5936 Quick Notes: Replaces stock Traxxas #5936 Fits the Slash 2wd (standard and LCG chassis) only Does not fit the Nitro Slash Optional Mud Flaps Optional Low Visibility Wheelie Bar Optional Tail Light Set After releasing our front bumper for the Traxxas Slash, we immediately started receiving customer requests for an RPM rear bumper. In typical RPM fashion, we don’t just make replacement parts; we make the best replacement parts possible! What sets the RPM rear bumper above all else? We started with our incredibly durable materials and created a bumper that is based off of current full-sized Short Course and Baja style rear bumpers. Full-sized rear bumpers are wide and flat and our scale version is exactly that, for the ultimate in rear-end protection. RPM rear bumpers will stop most rear impacts from affecting the truck in any negative way. Additionally, RPM rear bumpers for the Traxxas Slash weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster. What more could we do to make these things incredibly realistic? How about mounting points for mud flaps? That’s right; these bumpers come stock with mounting positions for RPM Mud Flaps (#81012 – available separately). Now the Slash owner can run mud flaps for ultra-realistic good looks. RPM rear bumpers for the Traxxas Slash are available in three popular color options – black, blue and chrome. RPM rear bumpers are sold with all necessary mounting hardware and complete mounting instructions. Tech Notes: This bumper will not fit the Traxxas Nitro Slash 2wd nor will it fit the Slash 4×4. RPM highly recommends the use of an RPM rear bumper mount (#80902 or #80905) for full rear-end crash and bash-proof protection

189,-

KJØP
Hovedbilde RPM 81007 Rear Bumper for Slash 2WD - Pink Replaces ...
RPM 81007 Rear Bumper for Slash 2WD - Pink Replaces ...
Art.nr: 81007
Copied
RPM Rear Bumper for Slash 2WD - Pink eplaces stock Traxxas #5936 Quick Notes: Replaces stock Traxxas #5936 Fits the Slash 2wd (standard and LCG chassis) only Does not fit the Nitro Slash Optional Mud Flaps Optional Low Visibility Wheelie Bar Optional Tail Light Set After releasing our front bumper for the Traxxas Slash, we immediately started receiving customer requests for an RPM rear bumper. In typical RPM fashion, we don’t just make replacement parts; we make the best replacement parts possible! What sets the RPM rear bumper above all else? We started with our incredibly durable materials and created a bumper that is based off of current full-sized Short Course and Baja style rear bumpers. Full-sized rear bumpers are wide and flat and our scale version is exactly that, for the ultimate in rear-end protection. RPM rear bumpers will stop most rear impacts from affecting the truck in any negative way. Additionally, RPM rear bumpers for the Traxxas Slash weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster. What more could we do to make these things incredibly realistic? How about mounting points for mud flaps? That’s right; these bumpers come stock with mounting positions for RPM Mud Flaps (#81012 – available separately). Now the Slash owner can run mud flaps for ultra-realistic good looks. RPM rear bumpers for the Traxxas Slash are available in three popular color options – black, blue and chrome. RPM rear bumpers are sold with all necessary mounting hardware and complete mounting instructions. Tech Notes: This bumper will not fit the Traxxas Nitro Slash 2wd nor will it fit the Slash 4×4. RPM highly recommends the use of an RPM rear bumper mount (#80902 or #80905) for full rear-end crash and bash-proof protection.

159,-

KJØP

Kunder kjøpte også

Hovedbilde Traxxas 1747T Lock Nut Flanged M4 Alu Orange (4)
Traxxas 1747T Lock Nut Flanged M4 Alu Orange (4)
Traxxas 1747T Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action. Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Rustler® 4X4 Brushless Stampede® 4X4 Brushless TRX-4® Sport High Trail Edition™ TRX-6® Ultimate RC Hauler 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Slash® 4X4 1/16 Summit™ Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica DCB M41 Widebody Ford® F-150 Raptor Ford® F-150® Raptor R™ 4X4 Ford® F-150® Raptor Jato® Nitro Rustler® Nitro Slash Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Slash® 4X4 Brushless Slash® Brushless Slash® VXL Slash® Stampede® 4X4 VXL Stampede® VXL Stampede® TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

99,-

109,-

KJØP
-9%
Hovedbilde RPM 80122 Rear Bumper Black Slash 4x4 Replaces TRX ... Hovedbilde RPM 80122 Rear Bumper Black Slash 4x4 Replaces TRX ...
RPM 80122 Rear Bumper Black Slash 4x4 Replaces TRX ...
RPM Rear Bumper for Slash 4×4 - Black Replaces stock Traxxas #6836 Quick Notes: Replaces stock Traxxas #6836 Optional Mud Flaps are available Optional Low Visibility Wheelie Bars are available Optional Spare Tire Carrier is available Optional Tail Light Set is available The 4×4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from RPM, we’ve made it even better! Our new rear bumper is modeled after full-sized short course and desert racing trucks for authentic scale realism, utilizing the same great looking rear bumper as that found on the 2wd version of the RPM rear bumper and making the most of an all-new bumper mount design specifically for the 4×4. This new mounting system has the perfect blend of rigidity and flexibility to absorb those nasty rear collisions without transferring huge amounts of impact energy into the more fragile components of the chassis. Additionally, with its twin hinge point mounting system, rear A-arm maintenance is a snap. Simply remove the two bottom-mounted flathead screws and the bumper swivels out of the way for easy access to the rear A-arms! It even allows the rear sway bar to stay in place! We incorporated a thicker skid plate design that does a fantastic job of protecting the rear end and lower mounting screws from harsh conditions such as gravel and asphalt impacts. The RPM lower mount / skid plate is over 35% thicker than the stock version! What more could we do to make these things incredibly realistic? How about mounting points for mud flaps and RPM tail light kits already widely available? That’s right; these bumpers come stock with mounting positions for RPM mud flaps (RPM #81012 available separately) and RPM Tail Light Kits (RPM #81030 also available separately). If you haven’t seen a Slash with a full set of LED’s running at night, you’re missing out! RPM rear bumpers for the Traxxas Slash 4×4 are available in three popular color options – black, blue and chrome on gray. RPM rear bumpers are sold with all necessary hardware and complete mounting instructions.

199,-

Ikke på lager
Hovedbilde Traxxas 7462 Shocks Blue GTR XX-Long without springs ...
Traxxas 7462 Shocks Blue GTR XX-Long without springs ...
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

459,-

499,-

KJØP
-8%
Hovedbilde Traxxas 7461 Shocks Blue GTR Long without springs (2)
Traxxas 7461 Shocks Blue GTR Long without springs (2)
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

449,-

KJØP
-4%
Hovedbilde Traxxas 7448 Spring Shock White GTR Long 0.892 Blue ...
Traxxas 7448 Spring Shock White GTR Long 0.892 Blue ...
 This is the set of Traxxas Long GTR Shock Springs                       with 0.892 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.892 Blue Rate GTR Shock Springs SPECS:    Length: 1.8" (45mm)           Wire Diameter: 0.043" (1.1mm)

69,-

KJØP
Hovedbilde Traxxas 7446 Spring White GTR XX-Long
Traxxas 7446 Spring White GTR XX-Long
This is a pair of XX-Long Shock Springs for the                    Traxxas GTR XX-Long Shocks. FEATURES: Steel construction, white in color           0.874 (black) compression rating INCLUDES: Two XX-Long Shock Springs SPECS:    Length: 2.2" (57mm)           Wire Diameter: 0.059" (1.5mm)

59,-

KJØP
Hovedbilde RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4 Hovedbilde RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4
RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4
RPM Mud Flap System for Slash 2WD & Slash 4×4 Quick Notes: For use with RPM Slash 2WD and Slash 4×4 Rear Bumpers only The Traxxas Slash is arguably one of the best and most authentic replicas of a modern Short Course Truck. Unfortunately, it lacks in a critical detail that many other manufacturers have incorporated into their trucks – mud flaps! That is no longer an issue! RPM now has a mud flap system that integrates with our Rear Bumper for the Traxxas Slash 2wd (RPM #81002, #81003 & #81005) and Slash 4×4 (RPM #80122, #80123 & #80125). The RPM Mud Flap System uses a pair of molded nylon support arms that bolt to pre-existing holes in the RPM bumper supports of our Slash rear bumpers. These support arms hold a set of well-designed rubber mud flaps that incorporate the molded RPM Logo on one side and are blank on the other. One final touch is a pair of molded screw supports that help prevent the screws from pulling through the soft rubber of the mud flaps. Tech Notes: The RPM Mud Flap System is designed to work with RPM Rear Bumpers for the Traxxas Slash 2wd (RPM #81002, #81003 & #81005) & Slash 4×4 only (RPM #80122, #80123 & #80125). They will not work with stock or other aftermarket rear bumpers.

149,-

Ikke på lager
Hovedbilde Bronto XH Balanseringsadapter 2-6S
Bronto XH Balanseringsadapter 2-6S
Brettet har utgang for 2-6celler og vil passe batterier som er utstyrt med XH balanseringskontakt. Bronto RC tilbehør er et must for å komplettere din RC hobby. Kvalitetstilbehør og komponenter perfekt for dine prosjekter.

119,-

KJØP
Hovedbilde CHHL Racing Series 2S 5200mAh - 100C - Deans - ... Hovedbilde CHHL Racing Series 2S 5200mAh - 100C - Deans - ...
CHHL Racing Series 2S 5200mAh - 100C - Deans - ...
CHHL Racing Series 2S 5200mAh - 100C - Deans - Hardcase Dimensjonene er 139x47x25 og passer i ett utvalg med 1/10-biler med mer. Deans-type kontakt.   Spesifikasjoner: Kapasitet: 5200mAh Spenning: 2S 7.4V Vekt: 266.5gram Størrelse: 139x47x25mm Strømplugg:    Deans

399,-

429,-

KJØP
-7%
Hovedbilde RPM 73862 Nerf Bars for Slash 2WD LCG Chassis - ...
RPM 73862 Nerf Bars for Slash 2WD LCG Chassis - ...
RPM Nerf Bars for Slash 2WD LCG Chassis - Black replacement for Traxxas #5833, #5833A & #5833G nerf bars Quick Notes: Stock replacement for Traxxas #5833, #5833A & #5833G nerf bars Sold in pairs Made in the USA HCG Nerf Bars are also available The chassis layout of the low center of gravity chassis (LCG) Slash 2WD is different than the original high center of gravity chassis (HCG), requiring a different nerf bar design. Our Slash 2WD LCG nerf bars fix that problem and are a direct, perfect fit! RPM Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed with our limited lifetime warranty against breakage. Tech Notes: RPM Nerf Bars are stock replacement parts, sold in pairs and work with all stock Traxxas chassis running Traxxas #5833, #5833A & #5833G nerf bars.

109,-

KJØP
Hovedbilde RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

KJØP
-11%
Hovedbilde Traxxas 4686 Spur Gear 48P 86T
Traxxas 4686 Spur Gear 48P 86T
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
Hovedbilde RPM 80955 Front Bumper & Skid Plate for the Traxxas ...
RPM 80955 Front Bumper & Skid Plate for the Traxxas ...
Quick Notes: – replaces stock Traxxas #5835 Quick Links: – available in Black, Chrome, Blue or Pink – optional Light Canister Set – optional Roof Light Set Description Our two-piece front bumper for the Traxxas Slash 2wd & Nitro Slash is simple, strong, effective and highly attractive. We made it a two-piece design to give the Slash 2wd owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available! Our Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though our thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper*. So even if the racer wants to run a full RPM front bumper and skid plate, they won’t have to worry about adding unwanted weight. To help improve overall durability, our skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates. The RPM front bumper and skid plate for the Traxxas Slash is available in four color options: black on black, blue on blue, pink on pink or a chrome bumper on a gray skid plate. We’re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection. *Our weight comparison is based on the weight of the stock Traxxas bumper along with the weight of the support ring and hardware (all of which is permanently removed once the RPM bumper / skid plate is installed). Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 2wd front bumper and skid plate, giving the Slash 2wd that awesome Desert Racing Truck look and open the Slash up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!

229,-

KJØP
Hovedbilde SkyRC D200 Neo Duo Computerlader AC200W Hovedbilde SkyRC D200 Neo Duo Computerlader AC200W
SkyRC D200 Neo Duo Computerlader AC200W
SkyRC D200 Neo Duo Computerlader AC200W - Lad 2 batterier samtidig - Kompakt og brukervennlig - 2x20A - Styr via mobil eller pc! SkyRC D200 Neo Duo er ett godt valg for deg som ønsker en kompakt og kraftig lader med mulighet til å lade 2 batterier samtidigo. SkyRC D200 har en makseffekt vil gi deg muligheten for 200W lading med AC og 800W DC på hver av de to separate ladeutgangene, og maks ladestyrke er 20A per port. Laderen bruker skrollehjul og knapp og har også innebygget balanserer og XT60-type tilkoblingspunkter. D200 har også en USB-C 3.0 port som gir deg muligeten til å lade andre dingser på 5V/3A SkyRC D200 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd og Pb batterier. Laderen går på vanlig nettstrøm 220V. Det følger med 220V strømkabel, batterier med XT60-kontakt kobles direkte i XT60-utgang på laderen. Skal man lade batterier med annen type batteriplugg må overgang benyttes, dette må kjøpes løst. XH-balanseringsplugg plugges direkte i balanseringsutgangen på lader.   Spesifikasjoner: Vekt 602gram Innspenning AC 100-240V Innspenning DC 10-30V Display Ja, med farge Størrelse 116x110x79mm Antall celler LiPo 1-6 Antall celler NiMh/NiCD    4-15 Discharge 10W Ladestyrke 0.1-20,0A Maks Ladeeffekt 2x 100W Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. Inkludert i eska: D200 Neo Duo-laderen, engelsk manual og 220V strømkabel.     Product details in english D200neo has independent dual ports and supports most batteries in RC industry. As a dual input charger, it can be used for various charging scenarios. We do not only inherit the meticulously designed interface and power functions of T1000 but also add the SkyCharger App control, charger master control enabled by Windows/Mac Os and also PD/QC3.0 fast charge. So it can meet the charging requirments of different users for different scenarios in a great extent.   Supercharged by Arm® Cortex®-M4 Push your next RC racing trip beyond the edge with SkyRC D200neo! The Arm Cortex®-M41 chip takes our most versatile, dual output D200neo into another dimension with a built-in DSP instruction. The chip core features a Floating Point Unit (FPU) that accelerates single precision floating point math operations and supports all ARM® single precision instructions and data types. Multiplied by Proprietary HyperBoost Thanks to the 200 MHz ARM Micro controller, the deployed Oversampling Technology can improve ADC Resolution to 16bit. The efficient PID mechanism can fine-tune the current to increase response speed and the charge current accuracy. AC/DC Dual Input. Efficient. Beyond. Dual ports work independently to charge two battery packs efficiently and simultaneously. RC hobbyists can flexibly choose AC or DC input according to the scenarios. In AC mode, the charging power is up to 200W, while the performance is even more powerful, up to 800W in DC mode. Whether you are a beginner or an RC guru engaging in racing, it is the charger to push the limits of what is possible! Parallel Charging: Fast. And Vast. D200neo features dual-port parallel charging, with a fast charge current of up to 35A. Enjoy your racing time, the screaming-fast D200neo has your back! Your battery packs have been fully charged while you are still brewing coffee! That is how you get supercharged by co-designing hardware, software, and MCU. Smart Power Distribution When a single port works, the D200neo will be pumping full power into that port! The charging power is dynamically and intelligently distributed in the circumstance that two ports work at the same time. Whenever either port finishes working, the other port will fully charge at full power. The total power is always used intelligently and efficiently! So. Pro. Digital Power. D200neo is not only professional in charging but also can act as a digital power supply. After clicks on the menu, D200neo is ready for your application, offering an optimal voltage of 5-27V with 0.1V increment, adjustable 1-15A current. Short circuit, Overload, and Reverse polarity protection are all included! Discharger, PD Hub & D200neo. Dream Team. The newly-released BD350* discharger boasts a maximum discharge current of 40A when working with D200neo. Rapid discharging at such a rate is definitely your cutting edge. *BD350 & PD Power Charging Hub are optional parts and need to be purchased separately. Battery Health Benchmarking When working with BD3504, the D200neo charger can use the tailored SkyRC Charger Master3 to view or export the battery's discharge curve in real time. Various batteries' discharging curves can be plotted for precise comparison and analysis, so defective batteries have nowhere to hide. *BD350 & PD Power Charging Hub are optional parts and need to be purchased separately. PD Strip for RC Gurus The PCH-150 Power Charging Hub (sold separately) is specially designed for RC hobbyists, with a full load power of 158W. The design incorporates a precision aluminum unibody enclosure that is strong, light, and durable with high thermal conductivity. Its thermal conductivity is more than that of ordinary die-casting aluminum. 20W USB-C Power Delivery D200neo features USB-C 3.0 Power Delivery (PD) to efficiently charge your 2020 MacBook Air at full speed, iPad Pro M1 and iPhone 13 series up to 3× faster than with an original 5W charger. The charger can supply DC power and pump electricity to your juice packs at the same time! Unleash Superpower with Cutting Edge Charger Master Connected to PC through USB-C, you can monitor and control D200neo with SkyRC Charger Master software (PC). You can also update the charger like OTA, and synchronize the latest software in real-time with our cloud. Dis/charging data can be analyzed and displayed in a graph. ColorX: Easy to charge, Easy on the eyes. Discover a new ColorX interface introduced by D200neo based on simple and textured visuals! The tailor-designed light cyan and green color scheme is for RC charging. It helps you focus on the setting. The Web2.0 responsive menu and well-designed icons make the operation more suitable for players accustomed to operating smartphones! Time to say bye-bye to dull typography and welcome bold and beautiful brand-new UI. Charge in your language ColorX is designed to be easily localized and comfortably engaged. The interface is currently available in English, Dutch, Chinese, French and Japanese*. Users can easily change the language with simple clicks so that they can charge in the most comfortable language. *More languages will be released by time! Optional Parts (not included): Charging cables BD350 Discharger - SK600147-01 PCH-150 Power & Charging Hub - SK600148-01 Parallel Charging Cable - SK600023-19 Pro Parallel Charging Cable - SK600023-20 Specs: Case Material: Plastic Case Size: 116x110x79mm Weight: 602g Display Type: Color X DC Input Voltage: 10-30V AC Input Voltage : 100-240V Charger power: AC: 200W MAX / DC: 800W MAX Discharge power: Main port: 10W Balance port: 37W MAX External discharge: 350W MAX 20W USB-C Power Delivery: QC3.0: 5V⎓3A, 9V⎓2A, 12V⎓1.5A 18W PD: 5V⎓3A, 9V⎓2.2A, 12V⎓1.67A 20W Battery Types/Cells: LiPo/LiHV/LiFe/LiIon: 1-6cells NiMH/NiCd: 4-15cells Pb: 3S/6S/12S Charge current: LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-20.0A Parallel：20.0-35.0A Discharge current: LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-2.0A External discharge：0.1-40.0A (through BD350 - sold separately) Balance current: LiPo/LiFe/LiIon/LiHV：1.5A MAX Operation: LiPo/LiFe/LiIon/LiHV: Balance, Charge, Discharge, Storage, Parallel NiMH/NiCd: Charge, Cycle, Re-peak, Discharge Pb: Normal, AGM Charge, Cold Charge, Discharge    

1.895,-

1.995,-

KJØP
-5%
Hovedbilde RPM 73865 Nerf Bars for Slash 2WD LCG Chassis - ...
RPM 73865 Nerf Bars for Slash 2WD LCG Chassis - ...
RPM Nerf Bars for Slash 2WD LCG Chassis - Blue replacement for Traxxas #5833, #5833A & #5833G nerf bars Quick Notes: Stock replacement for Traxxas #5833, #5833A & #5833G nerf bars Sold in pairs Made in the USA HCG Nerf Bars are also available The chassis layout of the low center of gravity chassis (LCG) Slash 2WD is different than the original high center of gravity chassis (HCG), requiring a different nerf bar design. Our Slash 2WD LCG nerf bars fix that problem and are a direct, perfect fit! RPM Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed with our limited lifetime warranty against breakage. Tech Notes: RPM Nerf Bars are stock replacement parts, sold in pairs and work with all stock Traxxas chassis running Traxxas #5833, #5833A & #5833G nerf bars.

99,-

KJØP
Hovedbilde Traxxas 5831A Lower Chassis Low CG Blue
Traxxas 5831A Lower Chassis Low CG Blue
This is the Lower Chassis for use with the  optional Traxxas #5830 Slash 2WD Low CG Conversion Kit.     FEATURES Plastic construction, blue in color  Fastens under front section of low CG chassis   INCLUDES Lower Chassis in Blue   SPECIFICATIONS  Length: 5.6" (142mm)  Width: 3.1" (79mm) at widest point   COMMENTS Must be used with the #5830 Low CG Conversion Kit. Will not fit on  stock Slash 2WD chassis.

75,-

KJØP
Hovedbilde Traxxas 5830 Chassis Conversion Kit Low CG Slash Hovedbilde Traxxas 5830 Chassis Conversion Kit Low CG Slash
Traxxas 5830 Chassis Conversion Kit Low CG Slash
This is the optional Low CG Conversion Kit for the  1/10 scale 2WD Traxxas Slash.     FEATURES Lowers the chassis 1" (25.4mm) for better handling and greater  cornering speed  Holds battery and electronics as deep in chassis as possible  45% lower battery position   INCLUDES Chassis  Lower Chassis  Two Nerf Bars  Battery Hold Down with Front and Rear Retainers  Two Front Shock Springs  Hardware and Instructions

439,-

499,-

KJØP
-12%
Hovedbilde Traxxas 5182A Ball Bearing Black Rubber Sealed ...
Traxxas 5182A Ball Bearing Black Rubber Sealed ...
These are the 5182A 20 x 27 x 4mm Ball Bearings for the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the inner bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 20 x 27 x 4mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 20mm Outer Diameter: 27mm Thickness: 4mm

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 5106A Ball Bearing Black Rubber Sealed ...
Traxxas 5106A Ball Bearing Black Rubber Sealed ...
These are the 5106A 15 x 24 x 5mm Ball Bearingsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the outer bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

KJØP
-9%
Hovedbilde Traxxas 4683 Spur Gear 48P 83T
Traxxas 4683 Spur Gear 48P 83T
This is a 48P, 83T Spur Gear for models with                   Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           83 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   83

39,-

Ikke på lager
Hovedbilde Traxxas 4676 Spur Gear 48P 76T
Traxxas 4676 Spur Gear 48P 76T
This is a 48P, 76T Spur Gear for models with                     Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           76 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   76

39,-

KJØP
Hovedbilde Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel
Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

Ikke på lager
-20%
Hovedbilde Traxxas 3642X Shoulder Screws Ultra Shocks (6)
Traxxas 3642X Shoulder Screws Ultra Shocks (6)
These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS:    Length: 12mm           Diameter: 3mm    

39,-

Ikke på lager
Hovedbilde Traxxas 3677 Wheelie Bar Mount Stampede/Rustler/Bandit
Traxxas 3677 Wheelie Bar Mount Stampede/Rustler/Bandit
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
Hovedbilde Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png