Hopp til innhold
-7%

RPM 70510 Threaded Hinge Pins for X-Maxx Fits* stock Traxxas A-a

Art.nr: 70510

129,-

139,-

- 7%
RPM

RPM

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RPM Threaded Hinge Pins for X-Maxx Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355


Quick Notes:

  • Manufactured from stainless steel
  • Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355
  • Can be used in place of CEN #GS025*
  • Works in the outer, lower a-arm hinge pin location only


In response to customer demand, we’re proud to release a set of threaded hinge pins for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back!

Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer, lower A-arm hinge pin location only. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).

Produsent

Relaterte produkter

 

Art.nr: 82352
Copied
RPM Upper & Lower A-arms for X-Maxx - Black Replaces the upper a-arm from stock Traxxas #7729 / Replaces the lower a-arm from stock Traxxas #7730 & #7731 Quick Notes: Stronger and lighter than stock Sold with 1 – upper and 1 – lower a-arm in each package 4 packages needed per vehicle Replaces the upper a-arm from stock Traxxas #7729 Replaces the lower a-arm from stock Traxxas #7730 & #7731 Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms to see what we could do to improve both strength and durability. The result… Our new X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, we used our proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! Our lower A-arm has better ground clearance than stock A-arms and has a cross section based off of our proven 1:5 scale HPI Baja A-arms so you know they’re tough! We’ve also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won’t force you into the “walk of shame”. They’re also universal fit, which means they’ll fit on any corner of your truck! No more worrying which arm fits where. RPM X-Maxx A-arms are molded in our trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by our industry-leading limited lifetime warranty against breakage for worry-free performance you can count on! Tech Notes: Each package comes with one upper and one lower A-arm. This kit replaces the upper a-arm from stock Traxxas #7729 and replaces the lower a-arm from stock Traxxas #7730 & #7731. Four packages will be needed to complete one full vehicle. Tip: For most users, any additional parts won’t be necessary. For heavy use, big jumps or extreme power, RPM recommends replacing the lower A-arm hinge pins with RPM #70510 Threaded Hinge Pins (sold separately).

349,-

KJØP

Kunder kjøpte også

Traxxas 77096-4-ORANGE- X-Maxx 8s with Belted Sledgehammer Tires & New Gearing   8s MONSTER TRUCK SUPREMACY Now With Belted Sledgehammer Tires!   NEW Belted Sledgehammer Off-Road Tires NEW 7886 Overdrive Gear Set Installed NEW 15/54 Stock Gearing NEW 17/46 Speed Gearing Included NEW Traxxas 2085X Servo/Digital High-Torque/Metal Gear WP Vehicle Specs: Model Name: X-Maxx 8s Belted Model Type: Monster Truck Model Speed: 80+ kph with two 4s LiPo batteries and optional pinion gear Model Skill Level: 6 Scale: X-Truck Weight: 8.66kg Length: 779mm Width: 540mm Height: 355mm Wheelbase: 480mm Center Ground Clearance: 107mm Drive System: Shaft-driven 4WD Drivetrain: Shaft-driven 4WD Transmission: Single speed Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: 1.0 metric pitch Servo(s): 2085X metal gear ultra-high-torque waterproof Radio System: TQi™ 2.4 GHz 2-channel transmitter with wireless module Battery Compartment Specs: 197x52x44mm Motor Specs: Motor Name: Velineon® 1200XL Motor Type: 1275 kV sensorless brushless Motor Weight: 665g Motor Length: 110mm Motor Diameter: 48mm Motor Shaft Size: 5mm Motor Connector Type: 6.5 mm bullet connectors ESC Specs: ESC Name: Velineon® VXL-8s™ ESC Type: Brushless ESC Case Size: 58x72x46mm ESC Weight: 215.5 g Motor Connectors: 6.5 mm bullet connectors Battery Connectors: Traxxas High-Current Connectors ESC Power Wire: 10 gauge Maxx® Cable What’s In The Box: X-Maxx, Ready-To-Race model with Traxxas Big Block brushless motor VXL-8s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi 2.4 GHz radio system High quality maintenance tools What You’ll Need: Batteries IMPORTANT: X-Maxx requires the use of LiPo batteries equipped with Traxxas High Current Connectors. Traxxas 4-Cell, 6700 mAh Power Cell LiPo batteries with iD® are recommended for optimal performance.(part 2890X). 4s LiPo Completer Pack with iD® The Traxxas Dual 4s Completer Pack is the perfect choice to extract maximum power from your X-Maxx. Two 6700 mAh 4-cell batteries and the Traxxas EZ-Peak® Live Dual charger are included for easy and fast charging performance (part 2997). AA Alkaline Batteries Four AA alkaline batteries for the transmitter.

15.495,-

16.995,-

KJØP
-9%
  Badlands MX43 Pro-Loc All Terrain Tires Mounted for X-MAXX Front or Rear, Mounted on Impulse Pro-Loc Black Wheels with Stone Gray Rings This is a pair of pre-mounted Badlands MX43 tires for X-MAXX®. Pro-Line is ready to unleash the long-awaited tire solution for X-MAXX® owners with the Biggest and Baddest tire and wheel combo ever conceived: the Badlands MX43 mounted on Impulse Wheels! Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the all-new Badlands MX43 tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design. These tires have been developed from the ground up for extreme X-MAXX® punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. The Badlands MX43 features Pro-Line’s ground breaking proprietary Pro-Loc Technology that creates an ultra-secure bond to Pro-Line’s Impulse Pro-Loc X-MAXX® wheels while still being removable when required. The Badlands MX43 is a true All-Terrain tire that will find traction on any surface but is best suited for loose & loamy dirt, mud or grass. Just imagine your X-MAXX® throwing up huge rooster tails with these aggressive looking tires!   Pro-Line has the ultimate Wheel solution for X-MAXX® owners with the all-new Impulse Pro-Loc Wheels!  The Impulse features a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fit into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. The Impulse design is inspired by full-size off-road wheels with a Tough, Blacked-out look and is manufactured at Pro-Line Headquarters in the USA out of extra thick, extremely durable material designed to take some serious abuse. The look of the Impulse Pro-Loc Wheel is finished off with the Stone Gray Bead-Loc Ring that will get your truck noticed wherever you go! If you want to take your X-MAXX® to the next level of Performance and Durability get Pro-Line’s new Badlands MX43 Pro-Loc Tires mounted to Impluse Pro-Loc Wheels!   Tire Features: Incredible Traction on Any Surface All New Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Ground Breaking Proprietary Pro-Loc Technology Tire also available Un-Mounted Foam Inserts Included Made in the USA Wheel Features: Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Wheels also available Un-Mounted Included: Badlands MX43 Pro-Loc Tires pre-mounted to Impulse X-MAXX® Wheels (2 pcs) Fits: Traxxas X-MAXX® Specs: Height: 211 mm Width: 97 mm

1.395,-

1.495,-

KJØP
-7%
Traxxas 7871X - Sledgehammer Tires & Wheels X-Truck Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Sledgehammer® belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts) (left & right) Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. At 8.4" tall, the Sledgehammer’s increased diameter gives your X-Truck™ a more powerful stance with even higher ground clearance. Sledgehammer tires come pre-mounted to massive 6-spoke black chrome X-Maxx wheels with an ultra-tough 8s-rated glue bead for the most extreme high-speed off-road action. Fits 24 mm splined hex, front or rear. Accessory part for these models: X-Maxx® Ultimate X-Maxx® XRT® SPECIFICATIONS: Scale: 1/6 , 1/6 XL Suit: Truck , Truggy Surface: Grass , Gravel Drive: 24mm hex Special: Belted

1.349,-

1.449,-

KJØP
-7%
En pakke med to små flasker gjengelim, begge flaskene er av type blå som er den svakeste teadlocken. Brukes på skruer for å forhindre at de løsner.

69,-

KJØP
These are the 5182A 20 x 27 x 4mm Ball Bearings for the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the inner bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 20 x 27 x 4mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 20mm Outer Diameter: 27mm Thickness: 4mm

129,-

139,-

KJØP
-7%
Suspension arms, upper, blue (left or right, front or rear) (2) (for use with #7895X X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

149,-

KJØP
Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

129,-

139,-

KJØP
-7%
Mottaker til blant annet Flysky FS-GT5, IT4S og Absima CR6P. Egner seg godt til radiostyrt bil og båt. Kompatibel med FlySky AFHDS 2A-radioer, blant annet FS-GT5. Ikke kompatibel med AFHDS 3-radioer som Noble NB4/NB4 Pro/NB4 Pro+. Mottakeren har innebygget gyro på styrekanalen som kan benyttes om ønskelig. Bindekabel følger med. Fra produsenten: Product Model: FS-BS6 PWM channels: 6 Wireless frequency: 2.4GHz Wireless protocol: AFHDS 2A Range: 100 ~ 300m (ground) Antenna type: single antenna (180m) Power: 4.0-6.5V RSSI: Supported Data port: PWM Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online Update: Yes Dimensions: 29 * 22 * 16.2 mm Weight: 7.6 g Certification: CE, RCM, FCC ID: N4ZBS600 Kompatibilitet FlySky FS-BS6 er en 6-kanals mottaker med AFHDS 2A-protokoll og innebygd gyrofunksjon. Mottakeren er kompatibel med FlySky-radiosendere som benytter AFHDS 2A, blant annet: FlySky FS-GT2E FlySky FS-GT5 Andre FlySky-sendere med AFHDS 2A-støtte Viktig: FS-BS6 er ikke kompatibel med AFHDS 3-sendere som FlySky Noble NB4, NB4+, NB4 Pro, NB4 Pro+ og Paladin PL18. Disse radiosenderne krever AFHDS 3-kompatible mottakere.   Informasjon på engelsk: Gyroscope Calibration The gyro has been calibrated at the factory however if it needs to be recalibrated, follow the steps below: 1. Turn off the transmitter and insert power into channel 1 (not the bind port) The receiver’s LED should start to flash slowly 2. Place the receiver on a flat horizontal surface, make sure it cannot move. 3. Insert the bind cable (plug) into the bind port. The receiver’s LED should start to flash rapidly 3 times then return to the previous flash speed if the calibration has been done successfully Note: to ensure the gyro works as expected, install the receiver horizontally at less than 10 degrees from level on your vehicles Binding Please follow the steps below to bind the BS6 receiver to your remote controller 1. Connect the bind plug to the receiver’s port B/VCC 2. Connect power to any other port on the receiver 3. Press and hold the transmitter bind key and turn on the transmitter in the same time. 4. Once binding is complete, the transmitter will exit bind mode. Remove the power and bind plug from receiver, then apply power to the port B/VCC 5. Check to make sure everything functions as expected, if not, please repeat the steps above. Note, if you are quite sure you follow the above steps completely correctly, please consider to update the firmware of your radio controller or receiver. And if you are still having problem, please check and make sure the receiver IS compatible with the brand and model of your transmitter. Size about 29*22*16mm Weight about 10 grams Channels 6 channels Voltage range: 4.0-8.4V DC Receiver sensitivity: -92dBm RF range: 2.408-2.475GHZ

399,-

549,-

KJØP
-27%
Traxxas 7831X - HD Suspension arm Blue, lower (left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Traxxas 7829X - HD Suspension arm Blue, upper (right or left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

119,-

KJØP
Ultimate Handling for Extreme Performance The Traxxas Maxx offers more power than ever before into a 1/10 scale monster truck platform. To take things up another level, the Traxxas WideMaxx kit extends the track width by 20 mm per side, allowing you to bury the throttle in the turns, soak up even more extreme terrain, and come out the other side ready for more.   The WideMaxx kit consists of extended versions of the Maxx’s extreme-duty cold-weather suspension arms, available in 6 total colors to allow you to customize your truck to your style. Additionally, new springs are included for the rear of the truck to dial in the suspension settings, while the original rear springs move to the front for optimum balance and performance. Finally, a set of wider toe links for the front finish out the new widened stance.   Available in six different color options Widens the Maxx by 1.57” (40 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspenson arms (4) WideMaxx toe links (2) Rear springs (1.725 rate)   Installation is simple, thanks to the Maxx’s thoughtful engineering throughout which makes removal and replacement of the included components quick and easy. The option to utilize existing components including the stock axles saves time and gets you back to the action with a whole new driving experience even faster.     Optional WideMaxx Upgrades:   Steel CV Driveshafts Built to take brutal punishment in stride, the Maxx's optional steel CV driveshafts #8996X are extended specifically for the WideMaxx kit. The set features all-steel construction and includes all required bearings. (#8654, #8654G, or #8654R and #7758, #7758G, or #7758R required for a complete set). Shafts also available separately (#8996A).   TUBES Toe Links TUBES lightweight 7075-T6 aluminum toe links are 30% lighter than steel and stronger than titanium. These are the strongest toe links you can buy for your WideMaxx. The secret is in the unique hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight. TUBES are the perfect high-performance upgrade for your WideMaxx and come brilliantly anodized in four different colors: orange (#8997A), green (#8997G), red (#8997R), and blue (#8997X).

639,-

699,-

KJØP
-9%
EC5 PARALLEL CONNECTOR, 12AWG, 100MM MERKE Radient PRODUKT Adapter KONTAKT EC5

119,-

129,-

KJØP
-8%
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 4s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 4s

159,-

KJØP
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

KJØP
Radient 010069 EC5 Serie-kontakt, 12AWG, 100mm Engelsk: Radient 010069 EC5 Series Connector, 12AWG, 100mm

109,-

119,-

KJØP
-8%
Traxxas 7830X - HD Suspension arm Blue, (right lower, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
EC5 PAIRS (10PCS)

419,-

439,-

KJØP
-5%
Wheel washers, green (4)

29,-

39,-

KJØP
-26%
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
Wheel hubs, hex, aluminum (red-anodized) (4)   Replaces the stock plastic wheel hexes with the ruggedness and good looks of red-anodized aluminum.

235,-

KJØP
These are the Shock Caps for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction  Steel ball link inserts in shock caps   INCLUDES Two each;  Caps  Spring Perches  Adjusters  2.5x14mm Cap Screws

69,-

KJØP
This is the 50T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1

39,-

49,-

KJØP
-20%
Seal kit receiver box

49,-

Ikke på lager
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

KJØP
-10%
This is a pair of optional Center Driveshafts for the Traxxas E-Maxx. FEATURES: Outside U-joint is lubricated and sealed by a rubber boot to             protect it from dirt and grime           U-joint pins are held captive by the ball bearings so you never             have to worry about losing a pin           Traxxas metal CV shafts do not require you to limit your suspension             travel INCLUDES: Two driveshafts with protective CV boots REQUIRES: Traxxas E-Maxx

469,-

Ikke på lager
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png