Hopp til innhold

Robinson Racing 1118 Pinion Gear Metric 18T

Art.nr: 1118

89,-

Robinson Racing

Robinson Racing

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are .6 mod pinion gears. These are used on cars such as the Tamiya
touring cars (this works on the TA01 and the TA02, but NOT on the TA03). They
also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the
Ultima Pro XL.
These gears are available in sizes from 12 to 24 teeth.
Includes a pinion set screw.

 

 

SPECIFICATIONS

Number of Teeth: 18
Pitch: .6 Mod
Bore: 1/8" 0.125" (3.2mm)

Produsent

Kunder kjøpte også

Robinson Racing Mod 0.6 Metric Pinion Gears are precision cut from hard alloy steel and lightened to reduce weight. The Gear has an 1/8 inch bore so it fits any motor with a standard 1/8" motor shaft, and one 5-40 set screw has been included. Features: Precision cut from hard alloy steel Lightened for reduced weight 1/8" bore fits standard 1/8" motor shafts Includes one 5-40 set screw Choose from multiple tooth count options to fine tune the gear ratio of your vehicle

89,-

KJØP
Shock Big Bore Short Complete (2) Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm shafts, 29mm shafts included) BIG BORE ALUMINUM SHOCKS: Traxxas Big Bore shocks provide ultimate dampening control. They’re hard-anodized, PTFE-coated and have large cylinders for greater oil capacity. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

389,-

419,-

KJØP
-7%
Robinson Racing 1114 Mod 0.6 Metric Pinion Gear (14T) Robinson Racing Mod 0.6 Metric Pinion Gears are precision cut from hard alloy steel and lightened to reduce weight. The Gear has an 1/8 inch bore so it fits any motor with a standard 1/8" motor shaft, and one 5-40 set screw has been included. Features: Precision cut from hard alloy steel Lightened for reduced weight 1/8" bore fits standard 1/8" motor shafts Includes one 5-40 set screw Choose from multiple tooth count options to fine tune the gear ratio of your vehicle

89,-

KJØP
These are .6 mod pinion gears. These are used on cars such as the Tamiya touring cars (this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.     SPECIFICATIONS Number of Teeth: 16 Pitch: .6 Mod Bore: 1/8" 0.125" (3.2mm)

89,-

KJØP
Replacement PISTON HEAD SET for Traxxas Big Bore Shocks. PACKAGE INCLUDES:   2- Pistons (2-hole)   2- Pistons (3-hole)   2- Shock Mounting Bushings   2- Washers   FEATURES:   All parts are constructed of black plastic

39,-

KJØP
These are LONG BIG BORE SHOCKS by Traxxas.  They may be used with the        many Taxxas cars. FEATURES: Pre-assembled shocks only require filling with included oil,             attaching included spacers and (not included) springs.           Big-bore long shocks are hard-anodized and teflon coated T-6             aluminum. INCLUDES: Two Shock Caps (aluminum)          One Silicone Oil Bottle           Two Cylinders (aluminum) 1-1/2"    Three Diaphragms (black rubber)           Three Large C Clips                Two Ball Ends (white plastic)           Three Flat Washers (nylon) 6mm     Two Bushings (metal)           Two Spacers (teflon) 5mm           Four Pistons (black plastic)           Six "O" Rings (blue)               Two Spring Retainers (plastic)           Two Flat Washers (nylon) 5mm       Two Spring Spacers (black plastic)           Five Small E Clips           Two Shock Shafts (1-3/4"x1/8") approximately           Twelve Spring Adjusters (various size) REQUIRES: Springs           C ring or needle nose pliers           Tweezers

389,-

419,-

Ikke på lager
-7%
DynoMAX B9667 - XT90 Charging Lead for Chargers with XT60 Output This is a charging lead for batteries with a XT90 connector. It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: XT90 Charger Connector: XT60 Wires: 14AWG Length: 500mm

139,-

KJØP
is is the stock 32P 11 Tooth Pinion Gear for the Traxxas Stampede 4x4 VXL. FEATURES: Steel construction INCLUDES: 32P 11 Tooth Pinion Gear with Set Screw REQUIRES: Fastening to motor shaft SPECS:    Number of Teeth: 11           Pitch: 32

49,-

59,-

KJØP
-17%
  This is a Hitec Programmable Standard Digital Servo                         with Hitec "S" Type Connector. FEATURES: Four heavy duty Karbonite gears           Top ball bearing           Programmable Digital           Designed for .20-.60 Airplanes, Steering & Throttle Servo, and            Trucks and Boats INCLUDES: One servo with pre-installed round (disk) servo horn           Four grommets           Four brass eyelets           Four round, flanged, phillips head screws 1.5 x 14mm           One adjustable servo horn           One large X servo horn  1.7" (43mm) end to end           One small X servo horn  1.2" (30mm) end to end           One straight servo horn 1.3" (33mm) end to end SPECS:    Speed:  0.20sec/60 degrees at 4.8V           Torque: 5.2 kg-cm (72 oz-in) at 4.8V           Length: 39.8mm (1.57")           Width:  19.8mm (0.78")           Height: 38.0mm (1.49")           Weight:    45g (1.59oz)

399,-

KJØP
This is the Tamiya 25 Turn RS-540 Torque Tuned Brushed Motor. FEATURES: Ideal upgrade for 1/10 scale RTR Tamiya electric vehicles           May be used in official Tamiya races INCLUDES: Tamiya 25 Turn RS-540 Torque Tuned Motor with presoldered Leads and            3.5mm Male Bullet Connectors SPECS:    Can Diameter: 1.4" (35.8mm)           Length: 2" (51mm)           Shaft Diameter: 0.12" (3mm)

199,-

KJØP
This is a Radient 32 Pitch Steel Pinion Gear. Made from strong steel material with a 32 tooth pitch

99,-

KJØP
Carson Adapter Mini-Tamiya male To Tamiya Female.

69,-

KJØP
DynoMAX B9665 - TRX Charge Lead for Chargers with XT60 Output This is a charging lead for batteries with a TRX connector. It fits the latest SkyRC chargers that are eqipped with a XT60 male output/charging connector. Don't use this for charging Traxxas LiPo batteries! Specs: Battery Connector: TRX Charger Connector: XT60 Wires: 14AWG Length: 500mm

125,-

KJØP
Yeah Racing RC Ball Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014MS/10) RC Ball Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Yeah Racing Performance Motor Brush 2 Pairs Description: This is Yeah Racing Performance Motor Brush. Motor brushes wear out over time resulting in decreased motor performance. Spraying out the motor with motor cleaner and installing new brushes can help maintain the performance of a brushed motor. Yeah Racing exquisitely use the premium quality of compound for this product. Compound is carefully formulated to achieve both great performance and durability. Also these brushes used the heat treatment in the production process. These brushes is also sintered for its optimal performace. These brushes are intended to use with high quality brushed motor such as Hackmoto v2. *Photos for reference only. Feature: For: Brushed Motor Material: Copper Color: Brown Include: Performance Motor Brush 2 (prs)

69,-

79,-

KJØP
-13%
Tamiya 47419 Monster Beetle Black Edition. The Monster Beetle is back…in black! This is a cool Black Edition of the Tamiya classic. It features dedicated body and chassis colors that endow a true Tamiya classic with a brand-new look. • 1/10 scale 2WD R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm, wheelbase: 247mm. • Black molded polystyrene resin body. It depicts a customized Beetle with gaping fenders, triple auxiliary lights and a shortened rear end, plus metal-plated parts for headlights and handles, etc. • Classic stickers have a brand-new color scheme. • ABS space frame is molded in a dark gray. • Superlative cushioning and grip are provided by 130mm diameter, 58mm width lug pattern pin-spike tires on gold color plated wheels, cushioned by high-performance CVA oil dampers on front double wishbone and rear trailing arm suspension setups. • Efficient and durable universal shafts come with rubber boots. • Includes 540-type motor. Requires: 2-Channel Radio servo 7.2-7.4volt battery pack & compatible charger. SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya TS paint. Scale 1/10 Shock Damper Oil-filled damper Suspension Fully Independent Terrain Use Multi-Purpose  

3.295,-

This new spray paint for clear polycarbonate bodies is designed for the 1/10 R/C Toyota 86 R/C car. It contains fine metallic particles to accurately recreate the unique orange paint finish on a polycarbonate body.   FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

99,-

119,-

KJØP
-17%
hese are .6 mod pinion gears. These are used on cars such as the Tamiya touring cars(this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.   SPECIFICATIONS Number of Teeth: 21 Pitch: .6 Mod Bore: 18 0.125 (3.2mm)

89,-

KJØP
KJØP
FlySky FS-GR3E receiver The FS-GR3E 3-channel receiver operates in the AFHDS system at 2.4 GHz. The receiver is compatible with FlySky GT2, GT2B, GT3, GT3B, GT3C, T6, CT6B, GR3E and TH9X transmitters. The receiver is designed for RC trucks, buggies, and boats.

219,-

249,-

KJØP
-12%
This is the Tamiya Cutting Mat A3 Size.     FEATURES Three layer design features a harder outer layer on the top & bottom  of the mat with a softer center layer  Perfect for cutting parts off of trees, cutting decals or any cutting  with a hobby kife that would damage your table  Metric rulers printed on the face make it easy to measure parts you  are cutting   INCLUDES One Cutting Mat   REQUIREMENTS Nothing is required   SPECIFICATIONS  Length: 17.75" (450mm)  Width: 12.75" (322mm)  Thickness: .80" (2mm)

259,-

279,-

KJØP
-7%
This is the PS-57 Pearl White Spray from Tamiya. FEATURES: Extremely useful for painting large surfaces           The color of the lid represents the color of paint           For use on polycarbonate surfaces INCLUDES: One 3.4oz (100ml) Spray Can of Pearl White Tamiya Color REQUIRES: Removing protective film from body before spraying COMMENTS: Highly Flammable

129,-

KJØP
 This is Tamiya Color for Aircraft Spray Paint                   (PS-52 Champagne Gold Anodized Aluminum).                           For Adult Modelers Only. FEATURES: Specially developed for finishing aircraft models. The color is             formulated to provide the authentic tone to 1/32 & 1/48 scale             model aircraft           The paint is a synthetic lacquer that cures in a short period             of time           Extremely useful for painting large surfaces           The color of the lid represents the color of paint INCLUDES: (1) Spray Can of Paint SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Highly flammable.

179,-

KJØP
This is Tamiya Color Spray Paint for Polycarbonate Bodies                             (PS-49 Metallic Blue)                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling           An appropriate amount of paint for finishing one R/C model           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies           The color of the lid represents the color of paint INCLUDES: One Tamiya PS-49 Metallic Color Spray Paint SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.           Highly flammable.

179,-

199,-

KJØP
-10%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png