Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Skruer / Skruesett / RC Screwz 081 Stainless Steel Screw Kit Traxxas TRX-4

RC Screwz 081 Stainless Steel Screw Kit Traxxas TRX-4

Art.nr: tra 081

899,-

RCScrewZ

RCScrewZ
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the optional RC Screwz Stainless Steel Screw Set for
use with the Traxxas TRX4 Trail Crawler.

 

 

FEATURES

Stainless steel construction
Polished natural finish
Replaces all screws and nuts used on the Traxxas TRX4 Trail Crawler

 

 

INCLUDES

All replacement screws for the TRX4 Trail Crawler with six
compartment plastic storage case

Produsent

RCScrewZ

RCScrewZ

Kunder kjøpte også

Hovedbilde Zap PT19 Adhesives Plastic Zap CA 1/3 oz
Zap PT19 Adhesives Plastic Zap CA 1/3 oz
 This is a 1/3oz Bottle of Plasti-Zap CA Glue from Pacer. FEATURES: Medium viscosity formula.           Cures clean and clear.           Will not attack paint.           Works on most plastics and vinyl.           Non-flammable and non-sniffable.           Permits rapid kit assembly in seconds. INCLUDES: One 1/3oz Bottle of Plasti-Zap CA Glue. SPECS:    1/3oz (9.47g)

69,-

KJØP
Hovedbilde Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz
Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gloss Aluminum Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 85049 Spray Lacquer TS-49 Bright Red 3 oz
Tamiya 85049 Spray Lacquer TS-49 Bright Red 3 oz
  This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Bright Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 87095 Putty White
Tamiya 87095 Putty White
  This is a tube White Plastic Model Putty from Tamiya. FEATURES: For repairing and modifying plastic models and repairing and covering             the surfaces of metal and wooden models           Can be diluted with Tamiya lacquer thinner before curing INCLUDES: Tube of White Plastic Model Putty REQUIRES: Applying with spatula type tool SPECS:    Contents: 1.1oz (32g)  

59,-

KJØP
Hovedbilde Traxxas 8356 Wheel Hubs Hex (disc brake rotors) (4)
Traxxas 8356 Wheel Hubs Hex (disc brake rotors) (4)
Wheel hubs, hex (disc brake rotors) (4)

49,-

KJØP
Hovedbilde RC4WD S0445 Scaler/Crawler Screws/Support Bag Hovedbilde RC4WD S0445 Scaler/Crawler Screws/Support Bag
RC4WD S0445 Scaler/Crawler Screws/Support Bag
Scaler & Crawler Screws & Support Bag Must have for serious scaler and rock crawlers! Included 100+ parts! Almost everything you will need on the field!   What you will get: 20x M3x6mm SHCS(Silver) 20x M3x8mm SHCS(Silver) 20x M3x10mm SHCS(Silver) 20x M3x12mm SHCS(Silver) 20x M3x14mm SHCS(Silver) 20x M3x16mm SHCS(Silver) 20x M3x20mm SHCS(Silver) 20x M3x25mm SHCS(Silver) 16x M3x30mm SHCS(Silver) 10x M3x34mm SHCS(Silver) 10x M3x3mm Set screw(Black) (Z-S0124) 20x M3x10mm Set screw(Black) (Z-S0308) 20x M3x20mm Set screw(Black) (Z-S0010) 30x 3mm Con washers(Silver) (Z-S0385) 10x M3 Nuts (Silver) 10x M4 E-clips(Silver) 40x M3 Lock nuts(Silver) 10x M4 Lock nuts(Silver) 5x 12mm Steps spacers(Silver) 20x 6mm Washers(Silver) 8x Sholder screws SHCS(Silver)     What's Included: 1x Scaler & Crawler Screws Box

699,-

779,-

KJØP
-10%
Hovedbilde Traxxas 6491X Gear 18T Pinion X-Maxx
Traxxas 6491X Gear 18T Pinion X-Maxx
Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

69,-

79,-

KJØP
-13%
Hovedbilde Hot Racing Steel Spur Gear 54t 1 Mod: X-Maxx Xo-1 Hovedbilde Hot Racing Steel Spur Gear 54t 1 Mod: X-Maxx Xo-1
Hot Racing Steel Spur Gear 54t 1 Mod: X-Maxx Xo-1
The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options.   NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features:   Specifications: Overall diameter: 52.8mm Gear face width: 8mm  Includes: One (1) mod 1 steel spur gear CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear

599,-

639,-

KJØP
-6%
Hovedbilde Traxxas 8215 Body Mounts and Posts Front and Rear ...
Traxxas 8215 Body Mounts and Posts Front and Rear ...
Body mounts & posts, front & rear (complete set)

99,-

KJØP
Hovedbilde Traxxas 8013 Grill and details Land Rover Defender ...
Traxxas 8013 Grill and details Land Rover Defender ...
Grill and details Land Rover Defender (set)

119,-

KJØP
Hovedbilde Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)
Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)
Disse lagerene er samme størrelse som Tamiya 1260 This is a 6X12x4mm Ball Bearing Set from Traxxas. FEATURES: Steel construction           Blue rubber dirt shields INCLUDES: (2) ball bearings, Part #5117 SPECS:    Inside diameter:      6mm           Outside diameter:    12mm           Width:                4mm COMMENTS: This bearing set is used in the transmission and differentials of             the Revo.  

55,-

KJØP
Hovedbilde Traxxas 1647 Silicon Grease
Traxxas 1647 Silicon Grease
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear
Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear
Savox SC-0254MGPLUS - Standard Sized Digital Servo with Soft Start 0.14sec 7.2kg/cm @ 6V The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Higher torque output than standard servos Ideal for 30-60 size aircraft, and some car applications Leading edge digital servo technology Strong 3-Pole Brushed motor Accurate and fast response Fine resolution Composite case Ball bearings Specifications: Torque @ 4.8v: 6.9kg/cm Torque @ 6v: 7.2kg/cm Speed @ 4.8v: 0.19s/60deg Speed @ 6v: 0.14s/60deg Dimensions: L40.7 x W20 x H39.4mm Weight: 49g Operating Temperature: -10° to 50°C Running Current (no load): 220mA @4.8V, 240mA @6.0V Stall Current (at locked): 1300mA @4.8V, 1500mA @6.0V Idle Current: 6mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

389,-

419,-

KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png