Hopp til innhold
Hjem / Dekk & felg / Traxxas El-Biler / 4wd / Summit 1/10 / Pro-Line 118411 Trencher 3.8" Mounted Front/Rear All-Terrain
-7%

Pro-Line 118411 Trencher 3.8" Mounted Front/Rear All-Terrain

Art.nr: 118411

699,-

749,-

- 7%
Proline

Proline
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a pair of 3.8" Pro-Line Monster Truck M2 Trencher Tires Mounted
                     on Desperado 1/2" Offset Black Wheels.

FEATURES: Fits the front or rear of monster trucks with 17mm hex
          Horizontal H-shaped tread nearly 1/4" (6.5mm) high for huge amounts
            of forward bite with high degree of longevity and durability
          Increased sidewall thickness to resist tearing at the bead
          M2 medium compound
          1/2" offset wheel for Traxxas Summit fans or any monster trucks that
            need greater stability
          Six-spoke nylon wheels, black in color

INCLUDES: Two 3.8" M2 Trencher Tires and two Desperado 1/2" Offset Black Wheels

REQUIRES: Mounting to vehicle

SPECS:      Tires-
          Diameter: 6.50" (165mm)
          Width: 4.15" (105mm)
            Wheels-
          Mounting Dia.: 3.82" (97mm)
          Width: 2.75" (70mm)
          Hex Size: 17mm
          Offset: 1/2" (12.5mm)

Produsent

Proline

Proline

Kunder kjøpte også

Hovedbilde Traxxas 2869X LiPo 2S 7.4V 7600mAh 25C w/iD Connector Hovedbilde Traxxas 2869X LiPo 2S 7.4V 7600mAh 25C w/iD Connector
Traxxas 2869X LiPo 2S 7.4V 7600mAh 25C w/iD Connector
This is the Traxxas Power Cell 7.4V 7600mAh 25C 2S LiPo Battery with iD Connector. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 7.4V 7600mAh 25C LiPo 2S Battery with iD Connector and Integrated Balance Connector REQUIREMENTS Balancer and LiPo compatible charger such as the Traxxas AC Powered EZ-Peak Plus Battery Charger, TRX2970 LiPo charging bag SPECIFICATIONS Configuration: 2S2P Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 6.1 x 0.98 x 1.8" (155 x 25 x 45mm) Weight: 13.2oz (375g)

995,-

1.095,-

KJØP
-9%
Hovedbilde Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

139,-

KJØP
Hovedbilde Traxxas 8651 Rebuild Kit for Driveshaft (2)
Traxxas 8651 Rebuild Kit for Driveshaft (2)
Rebuild kit, driveshaft (cross pin (2)/ 16mm pin (2)) (metal parts for 2 driveshafts)

49,-

KJØP
Hovedbilde Traxxas 5411 Wing Mount Revo
Traxxas 5411 Wing Mount Revo
This is the Wing Mount for the Traxxas Revo FEATURES: Nylon Construction           Black in Color INCLUDES: Two Wing Supports           One Wing Mount           Four 4mm x 8mm Cap Head Socket Screws           Four 3mm x 12mm Cap Head Socket Screws           One Instruction Sheet REQUIRES: Installation

119,-

KJØP
Hovedbilde Traxxas 5480X Wheel Wrench Splined 17mm
Traxxas 5480X Wheel Wrench Splined 17mm
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

KJØP
Hovedbilde Traxxas 5129 Driveshaft Assembly Rebuild Kit ...
Traxxas 5129 Driveshaft Assembly Rebuild Kit ...
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

KJØP
Hovedbilde Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)
Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

KJØP
Hovedbilde Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)
Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)
Disse lagerene er samme størrelse som Tamiya 1260 This is a 6X12x4mm Ball Bearing Set from Traxxas. FEATURES: Steel construction           Blue rubber dirt shields INCLUDES: (2) ball bearings, Part #5117 SPECS:    Inside diameter:      6mm           Outside diameter:    12mm           Width:                4mm COMMENTS: This bearing set is used in the transmission and differentials of             the Revo.  

55,-

KJØP
Hovedbilde Traxxas 5684 LED Lightbar w/Harness & Adapter Summit
Traxxas 5684 LED Lightbar w/Harness & Adapter Summit
This is the LED Lightbar with Harness and Adapter for use on the                   Traxxas Summit Truck RTR. FEATURES: Plastic construction           Chrome in color           JST Connectors           Clear LED Lights INCLUDES: Four LED Lights           Two Zip Ties           One Y-Harness           Instructions REQUIRES: Installation on the vehicle

185,-

KJØP
Hovedbilde Traxxas 5157 Cover Plates/Seals Revo
Traxxas 5157 Cover Plates/Seals Revo
  This is a package of replacement Cover Plates and Seals for use with    the Traxxas Revo 3.3 equipped with the forward only conversion. FEATURES: Black plastic construction INCLUDES: One sensor cover (one black plastic plastic construction)           One black plastic cover (covers the spot that the optidrive was)           One blue rubber plug REQUIRES: Installation COMMENTS: These are used on the Revo 3.3 equipped with the forward only           conversion.

29,-

KJØP
Hovedbilde Traxxas 5381X Steel Differential Spool
Traxxas 5381X Steel Differential Spool
This is the optional Differential Spool for the Traxxas Revo, E-Maxx. FEATURES: Constructed of steel           Installs in diff housing on either front or rear wheels INCLUDES: One Differential Spool for the Traxxas Revo,E-Maxx with instruction sheet SPECS:    Length: 2.3" (58.4mm) COMMENTS: Use only on off-road low-traction conditions to avoid damage to             driveline components  

149,-

KJØP
Hovedbilde Traxxas 5620 ExoCage Summit
Traxxas 5620 ExoCage Summit
This is the ExoCage for use on the                    Traxxas Summit 1/10 Truck RTR. FEATURES: Nylon construction           Black in color INCLUDES: All parts and hardware for one complete roll cage REQUIRES: Installation on the body

295,-

KJØP
Hovedbilde Traxxas 5617 Fender Flairs Front/Rear Summit (4)
Traxxas 5617 Fender Flairs Front/Rear Summit (4)
These are the Front and Rear Fender Flairs for use on the                    Traxxas Summit 1/10 Truck RTR. FEATURES: Nylon and rubber construction           Black in color INCLUDES: Two Front Fender Flairs           Two Rear Fender Flairs           Two Front Fender Flair Retainers           Two Rear Fender Flair Retainers           Twenty Two 2.6x6mm Cap Screws REQUIRES: Installation on the vehicle

169,-

KJØP
Hovedbilde Traxxas 5678 Gear Locking Differentail Output Summit
Traxxas 5678 Gear Locking Differentail Output Summit
This is the Locking Differential Ouput Gear for use on the                      Traxxas Summit Truck RTR. FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear           One Differential Slider           One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

149,-

169,-

KJØP
-12%
Hovedbilde Traxxas 5681 Carrier Diff Heavy Duty/Linkage ...
Traxxas 5681 Carrier Diff Heavy Duty/Linkage ...
This is the Heavy Duty Carrier Differential for use on the                      Traxxas Summit Truck RTR FEATURES: Nylon construction           Black in color INCLUDES: One Heavy Duty Differential Carrier           One Front and Rear Linkage Arm           One Differential Fork           Two X-Ring Gaskets           One Ring Gear Gasket           Two Bushings           One 6.5x10x0.5mm Washer REQUIRES: Installation on the vehicle

79,-

KJØP
Hovedbilde Absima 2440014 Body Clips Large/Silver (10 PCS)
Absima 2440014 Body Clips Large/Silver (10 PCS)
BODY CLIPS LARGE/SILVER (10 PCS)       (14)

49,-

KJØP
Hovedbilde Traxxas 1815 Body Washers (8)
Traxxas 1815 Body Washers (8)
This is the Traxxas replacement Body Washers. FEATURES:  Nylon construction            Helps prevent the body mount hole from cracking prematurely            White in color SPECS:     Outer Diameter: 0.87" (22mm)            Inner Diameter: 0.26" (6.7mm) INCLUDES:  Eight large body mount washers

29,-

Ikke på lager
Hovedbilde Traxxas 5460A Aluminum GTR Shocks Blue ... Hovedbilde Traxxas 5460A Aluminum GTR Shocks Blue ...
Traxxas 5460A Aluminum GTR Shocks Blue ...
This is a set of four optional Traxxas Aluminum Body GTR Shocks in Blue. FEATURES: Fits the Traxxas Revo, E-Revo, Summit, Slayer and Jato           Machined threaded aluminum body with oversized spring collar for             precise preload adjustments           Vented spring perches help prevent dirt from packing around the             X-ring seals           Exclusive X-ring seals for better sealing with less friction           Volume-compensating bladders ensure perfect damping throughout the             damping range INCLUDES: Four Shocks with Silicone Fluid REQUIRES: Springs depending on vehicle and desired damping action

729,-

KJØP
Hovedbilde Traxxas 5380 Front & Rear Differential Housing Revo
Traxxas 5380 Front & Rear Differential Housing Revo
This is the Front and Rear Differential Housing                        for the REVO from Traxxas. FEATURES: Durable black nylon construction INCLUDES: One diff housing (2 pieces)

49,-

KJØP
Hovedbilde Traxxas 5632 Chassis Brace Rear E-Revo/Summit
Traxxas 5632 Chassis Brace Rear E-Revo/Summit
This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.     FEATURES Aluminum construction, blue in color   INCLUDES Rear Chassis Brace  Two 3x35mm Socket Head Screws  One 4x14mm Button Head Screw  Instruction Sheet   SPECIFICATIONS  Length: 5.1" (129mm)

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 5330 Front Bulkhead Revo
Traxxas 5330 Front Bulkhead Revo
This is the Front Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo

185,-

KJØP
Hovedbilde Traxxas 5329 Rear Bulkhead Revo
Traxxas 5329 Rear Bulkhead Revo
This is the Rear Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Rear bulkhead halves Part #5329           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo  

199,-

219,-

KJØP
-9%
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Hovedbilde Traxxas 5337 Skid Plate Set Revo
Traxxas 5337 Skid Plate Set Revo
This is the Front and Rear Skid Plates for the Traxxas Revo. FEATURES: Black plastic construction           Front skid plate is a two-piece design           Rear skid plate is a one-piece design INCLUDES: Front and read skid plates          Part #5337           (8) 3X10mm button head screws       Part #2577           (1) 3X30mm button head screws       Part #2582 REQUIRES: Installation on the Traxxas Revo

99,-

KJØP
Hovedbilde Traxxas 5351 Slipper Pressure Plate & Hub Alloy
Traxxas 5351 Slipper Pressure Plate & Hub Alloy
This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.                  These are part of the slipper assembly. FEATURES: Aluminum construction INCLUDES: One slipper pressure plate           One slipper hub REQUIRES: Installation onto vehicle.

99,-

Ikke på lager

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png