Hopp til innhold

Multiplex 75888 MULTIswitch Flexx

Art.nr: 75888

299,-

Multiplex

Multiplex

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Multiswitch som kan kombles sammen med f. eks 55837 for å oppnå extra funksjoner.

Ett revlusjonerende system for å oppnå flere "kanaler" enklere.

Kan brukes på f.eks Tamiya lastabiler.

Produsent

Kunder kjøpte også

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
Tractor trucks rolling along highways worldwide are often seen with tough, protective equipment (known as "animal guards") on their front grilles.  This is a scale reproduction of these guards designed for the Tamiya 1/14 scale R/C tractor trucks (the King Hauler, and the Globe Liner). FEATURES:    Hard anodized aluminum bars              Metal plated ABS supports INCLUDES:    Three "A" shafts (5mm x 162mm)           Sixteen 2x5mm screws    One   "B" shaft   (5mm x 62mm)           One guard bracket    Two   "C" shafts  (5mm x 48mm)           Illustrated instructions    Four support brackets SPECS:    Width:  170mm (6.7")    Height:  120mm (4.7")     Depth:  23mm (.9")       (D2)

349,-

KJØP
This motor is appropriate for Tamiya 1/14 Trucks and similar sized models. No-load Rpm = 6,500 at 7,2 Yolts, 220 Nmm, 7,2 - 9,6 Volts

499,-

539,-

KJØP
-7%
Hitec 57344 Servo Extension 6"  This is a 6" Servo Extension by Hitec. FEATURES:            This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Installation SPECS:    Length: 6" (152mm) COMMENTS:                            Wire color code: Hitec-                            Black:  negative                            Red:    positive                            Yellow: signal

49,-

59,-

KJØP
-17%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png