Hopp til innhold
-5%

LouiseRC 3298B Tires & Wheels X-CYCLONE X-Maxx (MFT) (2)

Art.nr: 3298B

689,-

729,-

- 5%
LOUISERC

LOUISERC

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Louise X-CYCLONE - X-MAXX Tires - FRONT & REAR

Truck tires for the high performance Traxxas X-MAXX. The new X-CYCLONE tire has the new incorporated MFT technology that is engineered to limit tire expansion (normally refered to as "balooning"). They are mounted on a new very sturdy black nylon 7-spoke wheels with a X-Maxx specific 24 mm hex. The X-CYCLONE tire has a classic tread with plenty of rubber to withstand hard driving on multiple surfaces as long as it's not too rough!

Micro Fiber Tech Features (MFT):

  • New innovation and technlogy
  • Reduces over balooning
  • More ridgid overall tire structure
  • Less distorsion/flex
  • Stable and even contact with the road surface - more grip and longer tire life


Fits:

  • Traxxas X-MAXX 6s
  • Traxxas X-MAXX 8s
  • (Also may fit other trucks with 24 mm hexes)


Specs:

  • Micro Fiber Tech system (MFT)
  • Wheel diameter:
  • Tire Diameter: 212.9 mm
  • Tire Width: 98.2 mm
  • Weight (each):
  • Hex: X-Maxx 24 mm
  • Tire Compound: Sport
  • Wheel finish: Black Nylon

Produsent

Kunder kjøpte også

This is the Rear Bumper for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   SPECIFICATIONS  Length: 7.9" (202mm)  Height: 1.6" (41mm)

79,-

KJØP
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

KJØP
Skidplate Set Front & Rear with Rubber Impact Cushion XRT Skid plate, front (1), rear (1)/ rubber impact cushion (1) Front and rear skid plates with rubber impact cusion

119,-

149,-

KJØP
-20%
Skidplate Center XRT Skid plate, center Center skid plate

169,-

199,-

KJØP
-15%
Bumper Front w. Mount XRT Bumper, front/ bumper mount, front Front bumper with bumper mount

139,-

179,-

KJØP
-22%
Driveshaft assembly, center, aluminum

159,-

169,-

KJØP
-6%
These are the Chassis Nerf Bars for the Traxxas X-Maxx Monster Truck FEATURES Molded composite plastic construction Fastens to each side of the chassis to help reduce damage from sideimpacts INCLUDES Left and Right Chassis Nerf Bars SPECIFICATIONS Length: 8.2" (209mm) Height: 1.2" (31mm)

79,-

89,-

KJØP
-11%
Bulkhead Front Upper XRT and X-maxx Bulkhead, front (upper) Replacement front upper bulkhead

69,-

79,-

KJØP
-13%
MERKE Radient   KONTAKT XT90

799,-

859,-

KJØP
-7%
   This is a 1oz Bottle of Zap-A-Gap CA+ Glue from Pacer.       Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Superior gap filling formula.           Medium viscosity.           Allows approximately 7-10 seconds for part positioning.           Average of 20 seconds curing.           Works on oily surfaces also.           Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Zap-A-Gap CA+ Glue. SPECS:    1oz (28.4g)

129,-

139,-

KJØP
-7%
M-DRIVE Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm Straight Hex High quality hex/allen wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. The wrenches are also available separately plus also spare tips/bits. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head

219,-

239,-

KJØP
-8%
M-DRIVE Hex/Allen Wrench Spare Tip - 2.5mm Ball Hex High quality hex/allen wrench spare HSS steel ball tip. Specs: Length: 100mm Tip/Bits Hex Size: 2.5mm (ball) Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head Note that a ball head hex/allen tool tip always wear faster that a straight hex. They are also more easy to brake when dropping them on the floor or using too much force while tightening/losening a screw.

39,-

KJØP
M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Ball Hex High quality hex/allen wrench spare HSS steel ball tip. Specs: Length: 100mm Tip/Bits Hex Size: 2mm (ball) Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with countersunk head M3 hex screws with button head Note that a ball head hex/allen tool tip always wear faster that a straight hex. They are also more easy to brake when dropping them on the floor or using too much force while tightening/losening a screw.

39,-

KJØP
M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 1.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 electric motor pinions (most 1/10 cars)

39,-

KJØP
Traxxas 7880 - Pro-Built X-Maxx 8s Front Differential Differential, front, complete (fits X-Maxx® 8s) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas.

699,-

799,-

KJØP
-13%
Traxxas 7881 - Pro-Built X-Maxx 8s Rear Differential Differential, rear, complete (fits X-Maxx® 8s) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: X-Maxx®

649,-

749,-

KJØP
-13%
Features: Viscosity 150000CPS/5014WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml  

169,-

KJØP
Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

129,-

139,-

KJØP
-7%
This is the Differential Gear Set  for the Traxxas X-Maxx Monster Truck     FEATURES Hardened steel construction   INCLUDES Two Output Gears  Four Spider Gears  Two Aluminum Spacers

229,-

KJØP
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
  These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck       FEATURES Steel construction Secures the toe links to the steering blocks     INCLUDES Six 4x35mm Button Head Machine Screws     REQUIREMENTS 2.5mm Hex Wrench     SPECIFICATIONS Diameter: 4mm Length: 35mm

39,-

KJØP
RPM Adjustable Rear Body Mounts – 2WD Slash, Nitro Slash, Stampede & Nitro Stampede Replaces Traxxas #1914X. Also replaces Traxxas #1914R but does not contain provisions for long posts Quick Notes: Replaces Traxxas #1914X. Also replaces Traxxas #1914R but does not contain provisions for long posts Immediately after releasing our Adjustable Body Mounts for the Traxxas Slash 4×4 (#73932), RPM customers with the 2wd version of the Slash wanted adjustable, more durable body posts too. RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck. Our unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” (6-9.5mm) simply by moving the posts up or down on the mounts. This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about our body mounts and posts are beefier than stock – from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. We also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings. Tech Notes: These body mounts and posts are fully height adjustable on the Traxxas Slash 2wd. For vehicles listed above other than the Slash 2wd, each part number may be used although adjustability may be limited based on the vehicle.

109,-

KJØP
RPM Adjustable Front Body Mounts – 2WD Slash, Nitro Slash, Rustler & Nitro Rustler Replaces Traxxas #1914X. Also replaces Traxxas #1914R but does not contain provisions for long posts. Quick Notes: Replaces Traxxas #1914X. Also replaces Traxxas #1914R but does not contain provisions for long posts. Does not work with Traxxas #5803 -MacCachren Edition Slash 2WD VXL (or #6833 MacCachren body only) Adjustable Rear Body Mount is also available Front Shock Tower is also available Immediately after releasing our Adjustable Body Mounts for the Traxxas Slash 4×4 (#73932), RPM customers with the 2wd version of the Slash wanted adjustable, more durable body posts too. RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck. Our unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” simply by moving the posts up or down on the mounts. This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about our body mounts and posts are beefier than stock – from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. We also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings. Tech Notes: These body mounts and posts are fully height adjustable on the Traxxas Slash 2wd. For vehicles listed above other than the Slash 2wd, each part number may be used although adjustability may be limited based on the vehicle.

109,-

KJØP
Driveshaft, steel constant velocity (shaft only, 109.5mm) (1) (replacement shaft for #8996X)

145,-

KJØP
Replacement steel drive cup with 4x15.8 mm screw pin. Fits 8950X or 8996X steel CV driveshafts.

89,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png