HPI Racing 86896 Ball Stud 4.8x12mm (10)

Bronto XT60 w/cap - 3x Female - Praktisk koblingslokk - Pakke med 3 kontakter Pakke med 3 stykk Bronto XT60 med koblingslokk. Typen som benyttes på batterisiden av koblingene. Pluggen er utstyrt med koblingslokket som gjør at du slipper krympestrømpe på ledningene. Før ledningene gjennom koblingslokket og lodde de fast i kontakten. Koblingslokket klipses så fast i kontakten og du er ferdig.

På lager 8

Bronto XT60 w/cap - 3x Male - Praktisk koblingslokk - Pakke med 3 kontakter Pakke med 1 stykk Bronto XT60 med koblingslokk. Typen som benyttes på regulatorsiden av koblingene. Pluggen er utstyrt med koblingslokket som gjør at du slipper krympestrømpe på ledningene. Før ledningene gjennom koblingslokket og lodde de fast i kontakten. Koblingslokket klipses så fast i kontakten og du er ferdig.

På lager 8

Suspension pin set, complete (hardened steel), 4x64mm (4), 4x22mm (4), 4x38mm (4), 4x33mm (4), 4x47mm (4)/ 3x8mm BCS (14)/ 3x6mm BCS (4)/ retainers (8)

På lager 1

Traxxas 10295 - Maxx® Slash® Swaybar Set Sway bar kit, Maxx Slash® (front and rear) (includes front and rear sway bars and linkage) Sway bars are a powerful tool to change up the handling of your Maxx® Slash®. Sway bars allow you to dial in more or less understeer depending on the type of terrain and the level of grip available. The Maxx Slash sway bar kit includes front and rear sway bars with different levels of stiffness and all the necessary installation hardware. Accessory part for these models: Maxx® Slash®

** Ikke på lager

Dekk til en rekke Tamiya chassis. Passer blant annet F103GT, MF-01X, TT-02RR, TT-02, TT-01 Type-E, XV-01 og XV-01 Pro. 

** Ikke på lager

Tamiya 53113 RACING R/S INNER SPONGE This inner sponge set provides an even contact of the tire surface to the ground and extra high grip. Effect Of Inner Spronge   Feature:   For: 50419/50454/50476/53214/53220/53224/53227/53293/53294 Material: Sponge Color: Gray Qty: 4Pcs Without sponge, the tire may deform uner excessive pressure. Inner sponge minimizes deformation to maintain positive grip.

** Ikke på lager

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is the High-Torque Digital Waterproof Steering Servofor the Traxxas X-Maxx Monster Truck. FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo with Wire Lead and Connector SPECIFICATIONS Torque: 365oz/in Speed: 0.17 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink Weight: 3.6oz (103g) including heat sink

Bulkvarer kan kun kjøpes når de er på lager

This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,           4 of the shock C-clips and 3 body clips.

På lager 3

This is the Front Linkage Sway Bar Set for the Slash 4x4 from Traxxas and Stampede 4x4. FEATURES: Nylon and steel construction INCLUDES: 2 Rod ends           2 Ball studs           2 Hollow balls REQUIRES: Installation on front suspension

Ikke på lager

This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

På lager 2

This is the Arrma BLX 3600kV 540 size Brushless Motor.     FEATURES For on and off-road operation in 1/10 scale buggies, short course trucks and monster trucks     INCLUDES BLX 3600kV 540 size Brushless Motor with 12AWG Wire Leads, and 3.5mm Male Bullet Connectors     REQUIREMENTS ESC and Pinion Gear of modeler's choice     SPECIFICATIONS Dimensions: 1.4 x 2.1" (35.8 x 52.4mm) Shaft Length: 0.59" (15mm) Shaft Diameter: 0.125" (3.18mm)

På lager 1

This is the Flange Pipe (4pcs)  For the HPI Racing WR8     FEATURES Steel construction   INCLUDES Four flange pipes   COMMENTS This part is for the  1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

På lager 3

This is a package of 3x10mm Caphead Machine Screws. FEATURES Plain black steel construction. High round cap head screw with a hexagon socket drive insert. These screws can be used anywhere this size is needed. INCLUDES (6) Caphead Machine Screws REQUIREMENTS 2.5mm Allen/Hex Wrench SPECIFICATIONS Diameter: 3mm Length: 10mm

** Ikke på lager