Hopp til innhold
-11%

Hitec HS-65MG Mighty Metal Gear Feather Micro Servo U

Art.nr: 32065S

469,-

529,-

- 11%
Hitec

Hitec

** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Hitec HS-65MG Mighty Feather Metal Gear Micro Servo with
          Universal Futaba J, Hitec S, JR and Airtronics Z Connector.

FEATURES: HS-65MG has long lasting and durable metal gears
          One of the slimmest micro servos available
          High efficiency Neodymium magnet motor
          The HS-65MG was created for fast Park Flyer models, electric micro
            planes, MAVs and 1/18 scale cars, and features a top ball-bearing
            for long life and positive centering

INCLUDES: (1) HS-65MG Micro Servo
          (4) M1.7x7 servo mounting screws
          (1) Two-sided servo horn
          (1) One-sided servo horn
          (1) M1.7x3 servo horn screw
          (1) Four-sided servo horn

SPECS:    Length:    0.92" (23.6mm)
          Width:    0.45" (11.6mm)
          Height:    0.94" (24mm)
          Weigth:    0.44oz (12.5g)
          Speed: 0.14sec/60° @ 4.8V
                 0.11sec/60° @ 6V
          Output Torque: 24.99 oz-in (1.8 kg-cm) @ 4.8V
                         30.55 oz-in (2.2 kg-cm) @ 6V

Produsent

Kunder kjøpte også

  This is 2oz bottle of Pacer Foam Safe Kicker with Pump. FEATURES: Safe on most foam products           Compatible with most other Foam Safe CAs           Works on Balsa, Spruce, Plywood, Plastic and Metals, etc           Forces most CAs to cure in 10 seconds or less           Increases Gap filling and fillet forming compability           None-fuming formula INCLUDES: One bottle of Pacer Foam Safe Kicker           One pump REQUIRES: Use with CA glues SPECS:    2oz (59.1ml)

139,-

På lager 7
KJØP
The ZAP CA Glues are clog-resistant with and have an extra, long tip to reach into tight spots. Easy-to-squeeze bottles aid in applying just the right amount of glue for easier sanding and less mess. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Wicks quickly for instant bonds on tight-fitting parts. INCLUDES One ZAP CA Glue 1/2oz Thin COMMENTS Thin is instant setting: CA Thick is gap filling: CA+

79,-

** Ikke på lager
KJØP
HS–53 er Hitec sitt nyeste økonomiske servo, denne feather-servo er designet for å konkurreredårlige lavpris servoersamtidig opprettholde Hitec sin velkjente kvalitet. Designet med et slitesterk drevsett og en effektiv tre–polet motor, er dette en super lett og liten servo som er beregnet for små elektro fly og seilfly. Denne servoen er en vinner i klassen. Rimelig, men med Hitec sin kjente HØYE kvalitet.   Funksjoner Nylon drev Tre–Polet Motor 4,8 & 6.0V spenning økonomisk priset Meget lav vekt   Spesifikasjoner Motortype:                  3 Pole Speed :                       0,16 / 0,13 ??(4.8V/6.0V): Torque kg. / Cm.        1.2 / 1.5 ??(4.8V/6.0V): Størrelse i millimeter: 22,8 x 11,6 x 22,6  Vekt gram:                 8,0

259,-

** Ikke på lager
KJØP
Servo, digital high-torque, metal gear (ball bearing), waterproof     Length: 41 mm Height: 42 mm Width: 20 mm Max Voltage: 6,0 V Features: Water Proof, Digital, Metal Gears

699,-

749,-

På lager 1
KJØP
-7%
This is a 12x6E Thin Composite propeller from Advanced Precision Composites. For use on Electric powered aircraft only (not for glow engines). FEATURES Gray composite propeller blades that assemble onto a propeller hub. Comes with five adapter rings that adapt to different motor shafts. Comes in a bag attached to a header card. INCLUDES One composite propeller Five composite adapter rings REQUIREMENTS ALL props require balancing, this is VERY important, use top flite power point propeller balancer May need prop reamer, use great planes 4-Step standard prop shaft reamer or great planes precision prop reamer metric SPECIFICATIONS Diameter: 12" Pitch: 6 Hub inner diameter: 0.25"

95,-

På lager 1
KJØP
This is the Differential Gear Set for the Traxxas Revo and E-Maxx. And Summit. FEATURES: Steel construction INCLUDES: Two Output Gears           Two Spider Gears           Spider Gear Shaft and Diff Carrier Support           Instruction Sheet REQUIRES: Diff lube;           10K weight TRX 5135           50K weight   TRX 5137                    30K weight TRX 5136           Multi-weight set  TRX 5136X

199,-

219,-

På lager 2
KJØP
-9%
This is the Locking Differential Ouput Gear for use on the                      Traxxas Summit Truck RTR. FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear           One Differential Slider           One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

149,-

169,-

På lager 2
KJØP
-12%
This is a Heavy Duty 36" Servo Extension with                     Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer.              On one end of the wire is a male connector and on the                  other end of the wire is a female connector.   FEATURES: Gold-plated teminals improve conductivity and prevent oxidation for             longer lifespan.           Heavier, 20-gauge wire handles higher current loads.   INCLUDES: One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style             Connectors   SPECS:    Wire Gauge: 20           Wire Color Codes-             JR-                             Hitec-              Airtronics Z-             Brown:  ground      Black:  ground      Black: ground             Red:    positive    Red:    positive    Red:   positive             Orange: signal      Yellow: signal      Blue:  signal

65,-

** Ikke på lager
KJØP
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

På lager 4
KJØP
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

På lager 5
KJØP
This is a set of Traxxas 6x13x5mm Ball Bearings                    for use on the E-Revo FEATURES: Stainless Steel bearing construction           Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings  Part #5180 SPECS:    Inside diameter: 6mm (0.24")           Outside diameter: 13mm  (0.51")           Width: 5mm (0.20")

65,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png