Hopp til innhold
Hjem / Batteri & lader / Batteri / Lipo / Lipo 2 celler 7,4 volt / Gens Ace 2S 5300mAh - 60C - Hardcase Multiplugg

Gens Ace 2S 5300mAh - 60C - Hardcase Multiplugg

Art.nr: GEA53002S60T3

439,-

Gens Ace

Gens Ace
Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Gens Ace 2S 5300mAh - 60C - Hardcase Multiplugg

2S LiPo-pakke i laget for opp til 60C kontinuerlig utlading, passer godt til 1/10 biler som Slash og E-Revo. Dette batteriet er multiplugg-variant som betyr at batteriet leveres med EC3 og Deans (T-Plugg) adaptere så du slipper å kjøpe overgang.

 

Spesifikasjoner:

Kapasitet: 5300mAh
Spenning: 2S 7.4V
Vekt: 269gram
Størrelse: 139x46x25mm
Strømplugg:    EC3 og Deans (T-Plugg)

 

Gens ace Lipo 5300mAh 2S1P 7.4V 60C hardcase battery is suited for the following models: HPI 1/8 savage flux, VORZA FLUX HP, TRAXXAS 1/10 E-MAXX/E-REVO, 1/10 SLASH, XRAY 1/8 808E, SERPENT 1/8 811E etc. 

 

Specs

- Product Type:lipo battery pack

- Capacity: 5300mAh

- Voltage: 7.4V

- Max Continuous Discharge: 60C

- Weight: 269g

- Dimensions: 139*46*25mm 

- Balance Plug: JST-XHR

- Discharge Plug: T-plug

 

Caution:

Don't over-charge, or over-discharge batteries.
Don't put it besides the high-temperature condition.
Don't throw it into the fire.
Don't throw it into the water.

Produsent

Gens Ace

Gens Ace

Relaterte produkter

 

Hovedbilde Vant 5000352 7,4V 5000mAh 35C Wire Lead Hard Case ...
Vant 5000352 7,4V 5000mAh 35C Wire Lead Hard Case ...
Art.nr: 77-H5000352
Copied
Merke     Vant Spenning     7.4V Form     Hardcase Type     LIPO Kontakt     Deans/T-plugg Størrelse 140*48*26mm  

459,-

499,-

KJØP
-8%
Hovedbilde Vant 7.4V 7200mAh 30C DEANS – XH
Vant 7.4V 7200mAh 30C DEANS – XH
Art.nr: 77-7200302
Copied
7.4V 7200mAh 30C DEANS – XH   22x43x127

769,-

849,-

KJØP
-9%

Kunder kjøpte også

Hovedbilde Radient 010061 Charge Lead, 4mm Bullet To EC3 Male, ...
Radient 010061 Charge Lead, 4mm Bullet To EC3 Male, ...
Radient Charge Lead, 4mm Bullet To EC3 Male, 14AWG, 150mm (ESC End)

89,-

KJØP
Hovedbilde Radient 0259 4MM CHARGE ADAPTER DEANS (HCT)
Radient 0259 4MM CHARGE ADAPTER DEANS (HCT)
Ladekabel for DEANS, med 4mm bananstikker i enden.

99,-

KJØP
Hovedbilde Zap Adhesives Red Thread Locker .20 oz
Zap Adhesives Red Thread Locker .20 oz
This is the Pacer Red Z-71 Thread Locker. FEATURES: High-strength, premium grade red liquid locks and seals metal nuts,              bolts, and studs or metal fasteners up to 1" (26mm) in diameter           Holds in temperature ranges from -65°F - 300°F (-54°C - 149°C)           Resistant to gasoline and oil INCLUDES: One bottle .20oz (6ml) Pacer Red Z-71 Thread Locker REQUIRES: Applying bead around part to be bonded and assemble with a twisting             motion to spread adhesive. Allow to cure 24 hours for maximum             strength COMMENTS: Avoid contact with eyes and skin.  In case of eye contact, rinse             immediately with plenty of water and seek medical advice.  Wash             skin thoroughly with soap and water after use. Seek medical advice             if irritation persists.

59,-

KJØP
Hovedbilde Traxxas 7780 Housing Differential Front/Rear X-Maxx
Traxxas 7780 Housing Differential Front/Rear X-Maxx
This is the Front and Rear Differential Housing for the Traxxas X-Maxx Monster Truck. FEATURES Molded composite plastic construction Fastens to front and rear bulkheads and protects differential assembly from dirt INCLUDES One Differential Housing

39,-

KJØP
Hovedbilde Traxxas 8691 Gearbox Halves
Traxxas 8691 Gearbox Halves
Gearbox halves (front & rear)/ idler gear shaft

95,-

KJØP
Hovedbilde Hobbywing Motor EzRun 5687 1100kV Sensorless Hovedbilde Hobbywing Motor EzRun 5687 1100kV Sensorless
Hobbywing Motor EzRun 5687 1100kV Sensorless
Hobbywing EzRun 5687 Brushless 1100KV Sensorless Motor Features: 4 pole rotor for high torque, fast acceleration response and stable power output Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%) CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearings for high durability and smoothness Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency This EZRUN motor is a perfect match for the HOBBYWING EZRUN MAX6/5 ESC Temperature sensor port provides all-round protection to the power system (Hobbywing will develop some ESCs with the motor thermal protection function to pair these motors in future) Specs: Type: Brushless Sensorless Poles: 4 KV: 1100 LiPo: 3-8S Resistance: 0.0041Ohm No Load: 4.1A Max Current: 200A Power: Max 5800W Outer Dia: 56mm Length: 87mm Shaft Dia: 8mm Shaft Length: 31mm Weight: 916g Application: 1/5 & 1/6 Light-Duty Vehicles

2.095,-

2.195,-

KJØP
-5%
Hovedbilde Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10
Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10
QuicRun 1060, 60A børsteregulator som er vann og støv beskyttet. Passer til de fleste 1:10 biler med børsteoppsett, leveres med Tamiya batterikontakt og programmeres enkelt via jumper. Kan brukes med 2-3s LiPo eller 7,2V - 10,8V NiMh batterier.   Størrelse 35,5 x 32,18 x 18mm Vekt 39g

389,-

429,-

KJØP
-9%
Hovedbilde Yeah Racing YB6022B/S10 RC PTFE Bearing (8x16x5mm) ... Hovedbilde Yeah Racing YB6022B/S10 RC PTFE Bearing (8x16x5mm) ...
Yeah Racing YB6022B/S10 RC PTFE Bearing (8x16x5mm) ...
Yeah Racing RC PTFE Bearing (8x16x5mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6022BS/10) RC Telfon Bearing (8x16x5mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

79,-

KJØP
Hovedbilde Yeah Racing YB6039BS/10 RC PTFE Bearing (15x24x5mm) ...
Yeah Racing YB6039BS/10 RC PTFE Bearing (15x24x5mm) ...
RC PTFE Bearing (15x24x5mm) 10pcs FEATURE: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision SPECIFICATION: Yeah Racing (#YB6039BS/10) RC Telfon Bearing (15x24x5mm) Material: Metal INCLUDE: Bearing (10Pcs) * Photo for Reference Only TIPS ON CLEANING & LUBRICATING BALL BEARINGS (RC BEARING TIPS) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

KJØP
Hovedbilde Yeah Racing YB6048B/S10 RC PTFE Bearing 15x21x4mm ...
Yeah Racing YB6048B/S10 RC PTFE Bearing 15x21x4mm ...
Yeah Racing RC PTFE Bearing 15x21x4mm 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing RC PTFE Bearing (5x10x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

129,-

KJØP
Hovedbilde Traxxas 2262 BEC HV for TRX-4
Traxxas 2262 BEC HV for TRX-4
High Voltage BEC kit for all TRX-4 chassis Traxxas new High-Torque servos represent a huge power upgrade for the TRX-4. When installing a high-torque servo from Traxxas, it is required that you use the High-Voltage BEC kit (#2262) and a steel servo horn (#8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Note: When used with Traxxas 2250 servo the maximum voltage is 2S LiPo When used with Traxxas 2255 servo the maximum voltage is 3S LiPo

429,-

459,-

KJØP
-7%
Hovedbilde Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...
Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...
High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Hovedbilde DynoMax B9503 Connector BEC (JST-RCY) Pair
DynoMax B9503 Connector BEC (JST-RCY) Pair
Connector BEC (JST-RCY) Pair

25,-

35,-

KJØP
-29%
Hovedbilde Traxxas 8712 Speed Bit Master Set Hex & Nut Driver ... Hovedbilde Traxxas 8712 Speed Bit Master Set Hex & Nut Driver ...
Traxxas 8712 Speed Bit Master Set Hex & Nut Driver ...
Traxxas 7-Piece Metric Hex and Nut Driver Essentials Set Maximum Durability Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™. 7-Piece Metric Hex and Nut Driver Essentials Set (#8712): Precision-ground, hardened steel metric hex drivers Machined, hardened steel nut drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm Nut drivers: 5.0 mm, 5.5 mm, 7.0 mm, 8.0 mm

949,-

1.049,-

KJØP
-10%
Hovedbilde Traxxas 8715-30 Speed bit, hex driver, straight, 3.0mm ...
Traxxas 8715-30 Speed bit, hex driver, straight, 3.0mm ...
Speed bit, hex driver, straight, 3.0mm (120mm length)

119,-

129,-

KJØP
-8%
Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png