Traxxas

Dusty Motors 2011 Arrma Kraton/Talion protection cover (shock co

Art.nr: DMC2011

349,-

Dusty Motors

Dusty Motors

** Ikke på lager

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Arrma Kraton/Talion protection cover (shock covers not included)

Fits: Arrma Kraton/Talion only.

Scale: 1/8

Produsent

Dusty Motors

Dusty Motors

Range of shroud covers by model:

Traxxas models: Stammpede 4×4 VXL, Telluride 4×4, Slash 4×4, Slash 2WD, E-Revo/Summit, 1/10 Rally, E-Maxx, Rustler/Bandit and all 1/16 scale models
Thunder Tiger models: 1/8 scale MT4-G3, ER4-G3, ST4-G3
HPI models: 1/8 Savage Flux HP

Kunder kjøpte også

Hovedbilde M-DRIVE MD50200 - Wheel Nut Wrench Tool - 17mm

Hovedbilde M-DRIVE MD50200 - Wheel Nut Wrench Tool - 17mm

M-DRIVE MD50200 - Wheel Nut Wrench Tool - 17mm

M-DRIVE Wheel Nut Wrench Tool - 17mm High quality 17mm wheel nut wrench tool made of red/black anodized aluminium. The perfect tool for removing and tightening your 1/8 Buggy, 1/8 Truggy or 1/8 GT wheel nuts. It also fits Traxxas E-Revo, Summit, T-Maxx 3.3, Revo 3.3 & other brands of bigger monster trucks with 17mm wheel nuts. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Size: 9x29x110mm Nut Wrench Socket: 17mm hex Nut Wrench Socket Size: D23 x L53mm Suitable for: 17mm Wheel Nuts

149,-

Hovedbilde DynoMAX B9664 Charging Lead EC5 Male to XT60 14AWG ...

Hovedbilde DynoMAX B9664 Charging Lead EC5 Male to XT60 14AWG ...

DynoMAX B9664 Charging Lead EC5 Male to XT60 14AWG ...

DynoMAX B9664 - EC5 Charging Lead for Chargers wth XT60 Output This is a charging lead for batteries with a EC5 connector. It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: EC5 Charger Connector: XT60 Wires: 14AWG Length: 500mm

99,-

Hovedbilde Traxxas 8722 Speed Bits Premium Handle Medium

Traxxas 8722 Speed Bits Premium Handle Medium

Speed bit handle, premium (rubber overmold), medium size

109,-

119,-

-8%

Hovedbilde Traxxas 8715X Speed Bit Set Hex Drive ...

Traxxas 8715X Speed Bit Set Hex Drive ...

Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive

469,-

549,-

-15%

Hovedbilde Hitec 54609 Heavy-Gauge Twisted Wire Aileron Extension ...

Hitec 54609 Heavy-Gauge Twisted Wire Aileron Extension ...

This is a Hitec 6" Heavy Twisted Wire Servo Extension with JR, Hitec and Airtronics Z Style Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Heavier wire handles higher current loads with ease INCLUDES One 6" Long Servo Extension w/ JR, Hitec and Airtronics Z Style Connectors SPECIFICATIONS Length: 6" (152mm)

69,-

Hovedbilde Pro-Line 1015510 Trencher HP 3.8

Hovedbilde Pro-Line 1015510 Trencher HP 3.8

Pro-Line 1015510 Trencher HP 3.8" Belted MTD Raid 17mm ...

This is a pair of pre-mounted Trencher HP 3.8" Belted All Terrain Tires. Pro-Line is proud to introduce the History-making Trencher HP 3.8" BELTED All Terrain Truck Tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the new Trencher HP. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 3.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Like the original Trencher X 3.8" tire, the next generation Trencher HP 3.8" is destined to become the ultimate, go-to Bash tire for your truck! Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The new Belted Trencher HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately .(6345-00) The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Trencher HP 3.8" Belted tires now! COMPATIBILITY: Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Tekno RC MT410 Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx

1.049,-

1.099,-

-5%

Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz

Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

119,-

-8%

Hovedbilde DynoMax B9589 Connector EC5 5mm pair

DynoMax B9589 Connector EC5 5mm pair

Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Max load: 100-150A Size (together) : L: 33.5 x W20 x H10 mm Weight: 12.7 g (pair) Bullet Connector Diameter: 5 mm Stripped Wire Max dia: 4.3 mm (10AWG) Package includes: 1 pair of EC5 connectors

55,-

Hovedbilde Ezrun Max 6 Hobbywing ESC

Hovedbilde Ezrun Max 6 Hobbywing ESC

Ezrun Max 6 Hobbywing ESC

High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles. Advanced and Secure Electronic Switch The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available. Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces. Built-in Anti-Spark System The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S). Wide Range of Applications MAX6 Applications: This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It's the ideal option for high-end aggressively powered builds. Specifications Scale: 1/6th 1/7th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A Wires & Connectors Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB) Fan Size: 35.0x35.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Firmware Upgrade: Supported Size & Weight Size: 70.0x56.0x46.5mm Weight: 240g Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/6th 1/7th Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV≤1500/8S LiPo: KV≤1200(5892 Size Motors) Click here to look at the FAQ and Software Updates for EzRun MAX6 This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.

1.795,-

2.195,-

-18%

Hovedbilde LouiseRC LT222 Silicone Oil 50000cSt 75ml

LouiseRC LT222 Silicone Oil 50000cSt 75ml

Louise Silicone 50.000cSt Differential Fluid - 75 ml Content: 75 ml Viscocity: 50.000cSt

89,-

Hovedbilde Traxxas 5036 Silicon Shock Oil Premium 70WT (900cSt) ...

Hovedbilde Traxxas 5036 Silicon Shock Oil Premium 70WT (900cSt) ...

Traxxas 5036 Silicon Shock Oil Premium 70WT (900cSt) ...

Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

-9%

Hovedbilde Arrma 406147 1/8 Painted Body, Black Real Steel: ...

Arrma 406147 1/8 Painted Body, Black Real Steel: ...

1/8 Painted Body, Black Real Steel: Notorious 6S BLX

719,-

Hovedbilde Absima 13845WT/500000CPS Silicone Differential Oil ...

Absima 13845WT/500000CPS Silicone Differential Oil ...

Features: Viscosity 500000CPS/13845WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

179,-

Hovedbilde Traxxas 1647 Silicon Grease

Traxxas 1647 Silicon Grease

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Hovedbilde Arrma 310476 Steel Pinion Gear 15T Mod1 5mm

Arrma 310476 Steel Pinion Gear 15T Mod1 5mm

Steel Pinion Gear 15T Mod1 5mm OVERVIEW: This super-tough steel 15T MOD1 Pinion Gear provides a direct replacement for your stock item. FEATURES: Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured tooth profile for smooth operation - Precision manufactured double set screw holes for the fitment of set screws either side of the motor shaft for extra secure fitting - For fitment to 5mm motor shaft INCLUDES: 1 x Steel 15T MOD1 Pinion Gear 2 x M4x4mm Set Screw

129,-

Hovedbilde Arrma 310473 Steel Pinion Gear 12T Mod1 5mm

Arrma 310473 Steel Pinion Gear 12T Mod1 5mm

Steel Pinion Gear 12T Mod1 5mm

139,-

Hovedbilde Arrma 330338 Shock Rod End Set: Nero (2)

Arrma 330338 Shock Rod End Set: Nero (2)

Shock Rod End Set: Nero (2)

95,-

Hovedbilde Robinson Racing 1217 Pinion Gear Xtra Hard 5mm 17T

Robinson Racing 1217 Pinion Gear Xtra Hard 5mm 17T

Extra Hard High Carbon Steel Motor Pinion 5mm/1 module 17 This is the optional Robinson Racing 17 Tooth Pinion Gear for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3. FEATURES Extra hardened steel construction for durability Precision made For use in extreme conditions INCLUDES One 17 tooth pinion gear One 4x4mm set screw REQUIREMENTS Installation onto the motor shaft SPECIFICATIONS Length: .48" (12.12mm) Mounting hole diameter: 5mm

259,-

Hovedbilde Traxxas 3767G Shock Caps Green

Traxxas 3767G Shock Caps Green

These are the Green Aluminum Shock Caps from Traxxas. FEATURES: Aluminum construction, green in color Fits all Traxxas Ultra Shocks INCLUDES: Four Shock Caps REQUIRES: Installation on the shocks

179,-

189,-

-5%

Hovedbilde Traxxas 7727X Bulkhead Rear Upper/Lower Center Diff ...

Traxxas 7727X Bulkhead Rear Upper/Lower Center Diff ...

X-Maxx rear upper and lower bulkhead for use with 8s Torque-Biasing Center Drive™. Replaces #7727 and #7728, and requires (2) #5108 ball bearings to complete installation.

239,-

269,-

-11%

Hovedbilde Traxxas 7787 Gear covers (3)

Traxxas 7787 Gear covers (3)

Denne er gått ut, og er erstattet med TRX 7887 Covers, gear (3)

Hovedbilde Traxxas 7786X Input Shaft Transmission X-Maxx

Traxxas 7786X Input Shaft Transmission X-Maxx

TRX 7786X Input shaft, transmission (cush drive)

69,-