Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Rally 1/10 Brushless 4WD / Dusty Motors 0051 Slash 4×4/Rally LCG Chassis Protection Cover B

Dusty Motors 0051 Slash 4×4/Rally LCG Chassis Protection Cover B

Art.nr: DMC0051

379,-

Dusty Motors

Dusty Motors
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Fits: Traxxas Slash 4x4 with LCG chassis and 1/10 Rally only.

Scale: 1/10

Color: Black

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool.


Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

 

DMC 0051

TRX0051

Produsent

Dusty Motors

Dusty Motors

Range of shroud covers by model:

  • Traxxas models: Stammpede 4×4 VXL, Telluride 4×4, Slash 4×4, Slash 2WD, E-Revo/Summit, 1/10 Rally, E-Maxx, Rustler/Bandit and all 1/16 scale models
  • Thunder Tiger models: 1/8 scale MT4-G3, ER4-G3, ST4-G3
  • HPI models: 1/8 Savage Flux HP

Kunder kjøpte også

Hovedbilde Gens Ace 3S 6500mAh - 60C - EC5 Bashing Series Hovedbilde Gens Ace 3S 6500mAh - 60C - EC5 Bashing Series
Gens Ace 3S 6500mAh - 60C - EC5 Bashing Series
Gens Ace 3S 6500mAh - 60C - EC5 Bashing Series 3s 6500mAh - 60C - Gens Ace XT90 Bashing Series levers ferdig med EC5 batteriplug og XH balanseringplugg. Spesifikasjoner: Kapasitet: 6500mAh Spenning: 3S 11.1V Vekt: 418gram Størrelse: 154x46x26mm Strømplugg:    EC5   Specs: - Product Type: Soft Case Lipo Battery Pack - Bashing Series - Capacity: 6500mAh - Voltage: 11.1V - Net Weight: 418g - Dimensions: 154*46*26mm - Balance Plug: JST-XHR, 4 pin - Discharge Plug: EC5 - Charge Rate: 1-3C Recommended   Usage: Gens ace lipo 6500mah 3S1P 60C battery packs are suited for 1/8 SLEDGE, 1:7 FELONY 6S BLX/LIMITLESS/INFRACTION 6S BLX/MOJAVE 6S/Kraton Roller/MOJAVE ROLLER;1:8 TYPHON 6S/3S, KRATON 6S BLX/TALION 6S BLX/OUTCAST 6S BLX/NOTORIOUS 6S;1:10BIGROCK 4x4 3S BLX/OUTCAST/Kraton

949,-

KJØP
Hovedbilde Radient 010068 CHARGE LEAD, 4MM BULLET TO EC5 ...
Radient 010068 CHARGE LEAD, 4MM BULLET TO EC5 ...
CHARGE LEAD, 4MM BULLET TO EC5 MALE,12AWG, 150MM (ESC END)

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 1985 Fiber Washers 5x8mm (20)
Traxxas 1985 Fiber Washers 5x8mm (20)
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

Ikke på lager
Hovedbilde Traxxas 6928 Conversion Kit Clipless Body Slash 4x4 Hovedbilde Traxxas 6928 Conversion Kit Clipless Body Slash 4x4
Traxxas 6928 Conversion Kit Clipless Body Slash 4x4
Traxxas 6928 Body conversion kit, Slash 4X4 (includes front & rear body mounts, latches, hardware) (for clipless mounting) The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide a secure mounting point that helps prevent pull-through damage. The kit includes all mounting hardware and adhesive templates. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash® 4X4 Brushless Slash 4X4

399,-

419,-

KJØP
-5%
Hovedbilde Dualsky 2s 520mAh - 25C - Dualsky XPower ECO-S - JST
Dualsky 2s 520mAh - 25C - Dualsky XPower ECO-S - JST
2s LiPo på 520mAh med JST batterikontakt og XH balanseringskontakt. Antall celler 2 Spenning 7,4V Kapasitet 520mAh C-Rating 25C Størrelse 58 x 18 x14mm (LxBxH) Vekt 25,6g Maks ladestyrke 5C (1C anbefalt)

119,-

KJØP
Hovedbilde Pro-Line 323863 VW Full Fender Baja Bug Clear Body ... Hovedbilde Pro-Line 323863 VW Full Fender Baja Bug Clear Body ...
Pro-Line 323863 VW Full Fender Baja Bug Clear Body ...
This is the Pro-Line Volkswagen Full Fender Baja Bug Clear Body For use on Traxxas Slash or Slash 4x4 FEATURES:           Made from durable/genuine .040" (1.5mm) thick Lexan           Classic VW Bug style with Baja flair           Simulated rear engine detail just like the stock motor           Achieve a new look with optional add on spoiler           Paint-then-peel overspray film included           Officially licensed by Volkswagen INCLUDES:           Clear VW Baja body           Spoiler (molded into lexan)           Spoiler mounting hardware           Decal Sheet           Window Mask REQUIRES:           Lexan safe paint for painting the inside of the body. The color choice is up to the modeler.           Hobby knife or scissors to cut out the decals SPECS:              Length:    19.7" (500mm)           Width:      7.0" (178mm)           Height:     6.0" (152mm)           Wheelbase: 12.5" (318mm) COMMENTS:            Tape inside of body at chassis sides to better protect against paint damage           Side bars will need to be removed if you want to run the Baja Buggy body       (B1)

549,-

KJØP
Hovedbilde Traxxas 6511 Link Bluetooth Wireless Module TQi
Traxxas 6511 Link Bluetooth Wireless Module TQi
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8 Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE - Car and Truck Stand Work Like a Pro with the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addition to your workbench. Made from high-quality aluminum and anodized with a brilliant blue finish, the RC stand is built for years of dependable service. The stand swivels a full 360° on dual ball bearings for smooth, precise action. A handy locking lever secures the stand in one of 16 different positions for maximum stability. Pick up your Traxxas RC stand today and start working like a pro! RC Stand Features: Engineered for the full range of Traxxas 1/10 to 1/8 scale vehicles Use with TRX-4M foam stand (9794) for 1/18 scale models Use with Foam Inserts (8794) for LaTrax 1/18 scale and Traxxas 1/16 Scale models Tough aluminum construction with a brilliant blue finish Dual ball bearings for smooth 360° rotation Locking lever with 16 positions Non-slip foam pads on top and bottom Perfect for maintaining and storing vehicles Prevents flat-spotting of tires Compatible with 1/18 TRX-4M™ The Traxxas RC stand features cutouts for the TRX-4M display stand (9794, sold separately) to securely hold 1/18 scale models for storage and maintenance. Compatible with LaTrax 1/18 Scale and Traxxas 1/16 Scale Models The foam insert set for the Traxxas RC Stand (8794, sold separately) accommodates smaller scale models.

479,-

519,-

KJØP
-8%
Hovedbilde RPM 80022 Front Bumper & Skid Plate Black Slash 4x4
RPM 80022 Front Bumper & Skid Plate Black Slash 4x4
Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We’re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection. Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!    

219,-

239,-

KJØP
-8%
Hovedbilde RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4 Hovedbilde RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4
RPM 81012 Mud Flap System for Slash 2WD & Slash 4×4
RPM Mud Flap System for Slash 2WD & Slash 4×4 Quick Notes: For use with RPM Slash 2WD and Slash 4×4 Rear Bumpers only The Traxxas Slash is arguably one of the best and most authentic replicas of a modern Short Course Truck. Unfortunately, it lacks in a critical detail that many other manufacturers have incorporated into their trucks – mud flaps! That is no longer an issue! RPM now has a mud flap system that integrates with our Rear Bumper for the Traxxas Slash 2wd (RPM #81002, #81003 & #81005) and Slash 4×4 (RPM #80122, #80123 & #80125). The RPM Mud Flap System uses a pair of molded nylon support arms that bolt to pre-existing holes in the RPM bumper supports of our Slash rear bumpers. These support arms hold a set of well-designed rubber mud flaps that incorporate the molded RPM Logo on one side and are blank on the other. One final touch is a pair of molded screw supports that help prevent the screws from pulling through the soft rubber of the mud flaps. Tech Notes: The RPM Mud Flap System is designed to work with RPM Rear Bumpers for the Traxxas Slash 2wd (RPM #81002, #81003 & #81005) & Slash 4×4 only (RPM #80122, #80123 & #80125). They will not work with stock or other aftermarket rear bumpers.

149,-

Ikke på lager
Hovedbilde RPM 80982 Light Canister Set Black Slash Hovedbilde RPM 80982 Light Canister Set Black Slash
RPM 80982 Light Canister Set Black Slash
RPM Light Canister Set for RPM Front Bumpers - Black Quick Notes: Fits most RPM Front Bumper kits LED's are not included Our Light Canister Set for RPM Slash 2wd Front Bumpers #80952, #80953 or #80955, Slash 4×4 Bumper #80022, #80023 & #80025, Associated SC10 Front Bumpers #70902 or #70905 and Losi SCTE Front Bumpers #73042 (bumpers not included) is designed to give the appearance of a Baja Desert Truck with its scale off-road light design. Each of its four lights is modeled after a full-sized, 6” off-road light. Each individual light comes with a light canister (or housing), a clear lens and a light guard. Our 4-light set also comes with a unique mounting plate that allows all four lights to sit centered in perfect symmetry within the upper and lower bars of our custom bumpers. The mounting plate uses the same three screws that attach the bumper to the bumper skid plate while keeping the lights recessed and protected by the upper and lower bumper bars. Yes, the lights look simply awesome on the front of the truck but why did we make them? Well, we wanted to light up the night! That’s right, each of the four light canisters come set-up for a 3mm LED light (not included). Our instructions detail a very simple method to install a set of 4 LEDs in our canisters to carry the fun long into the night. Our calculations show that adding 4 – 3mm LEDs and tying the power source directly into the main battery pack creates a minimal draw of power (only 40mAh) but throws out a nice amount of light to keep the fun going as daylight draws to an end! For the ultimate in scale-realism, there is nothing better than the RPM Light Canister set. They are available in classic black or bright chrome. Either looks incredible on the truck and adds the finishing touch to any concourse winning paint job! What’s Included:The RPM Light Canister Set includes: 4 – Light Canisters, 4 – Light Guards, 4 – Clear Lenses, 1 – Light Mount, 4 – M3 x 8mm Flathead Screws & complete instructions. Tech Notes: LED lights are not included. The RPM Light Canister Set will not work with a stock Slash, SC10 or SCTE front bumper. You must use an RPM front bumper for the Slash 2wd, Slash 4×4, SC10 or SCTE only. The RPM Light Canister Set can be modified to fit any number of applications but warranty restrictions do apply. See instructions for more details.

149,-

KJØP
Hovedbilde RPM 81030 ail Light Set for Slash 2WD, Slash 4×4 & AE ... Hovedbilde RPM 81030 ail Light Set for Slash 2WD, Slash 4×4 & AE ...
RPM 81030 ail Light Set for Slash 2WD, Slash 4×4 & AE ...
RPM Tail Light Set for Slash 2WD, Slash 4×4 & AE SC10 2WD Quick Notes: Direct fit with most RPM rear bumpers Fits a variety of applications with minor modifications (warranty restrictions apply) LED’s are not included Our bumper and roof light sets for the Traxxas Slash 2wd, Slash 4×4 and Associated SC10 2wd and other short course trucks light up the night quite nicely but what about the back? We now have a true-to-scale tail light set that bolts right on an RPM rear bumper, taking care of the final piece in the night running puzzle. Our tail lights add that concours winning touch for full-scale realism! With a set of bright white lights out front (using RPM Light Canister Sets) and a set of RPM red tail lights out back, finding your way around at night has never been easier! Our tail light set comes complete with everything needed to bolt a pair of 3mm LED’s (LED’s not included) to an RPM rear bumper (RPM #70122, #70125, #80122, #80123, #80125, #81002, #81003 & #81005) including a pair of red tail light lenses, two lens housings and a pair of mounting plates (the RPM mounting plates can be modified to fit other short course applications as well). The lens housings themselves can also be modified to fit other areas of different vehicles for alternate effects too, such as running a second set of lights as amber marker lights (identical to full-sized short course and Baja racing trucks). For lighting up what’s out front, we have our Light Canister Sets as well as our Roof-Mounted Light Bar Set. RPM light sets are the best and only alternative for continuing your fun long after the sun sets and the lights go out! Tech Notes: 3mm LED lights are not included. The RPM mounting plates and lens housings can be modified to fit any number of applications but warranty restrictions may apply. See instructions for more details. RPM tail light sets are designed specifically for RPM rear bumpers for the Traxxas Slash 2wd, Slash 4×4 and Associated SC10 2wd (sold separately).

99,-

KJØP
Hovedbilde RPM 73272 Black ESC Cage for Castle Sidewinder 3 & ... Hovedbilde RPM 73272 Black ESC Cage for Castle Sidewinder 3 & ...
RPM 73272 Black ESC Cage for Castle Sidewinder 3 & ...
ESC Cage for the Castle Sidewinder 3 & Sidewinder SCT Quick Notes: – works with Castle Sidewinder ESCs #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00 – fits the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally – also fits the Stampede 2wd, Rustler & Bandit – see “Tech Notes” below Quick Links: – available in Black & Blue Description The RPM ESC Cage for both the Castle Sidewinder 3 & Sidewinder SCT ESCs fits in the stock location on the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally, while also working on other Traxxas 1/10th scale vehicles as well (see “Tech Notes” below). Our cage allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan free to do its job. Furthermore, we left air channels along the sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool. Each ESC Cage is designed to simplify ESC installation and maintenance of the vehicle. Two screws hold the entire assembly to the chassis, that’s it! No more struggling with gooey double-sided tape to remove the ESC to clean your vehicle or transfer the electronics to another car. It’s so quick, you can transfer the entire assembly from one vehicle to the next in about a minute! We include a separate, encased on / off switch mount that bolts directly to our cage in one of four locations / orientations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Alternately, you can mount the switch anywhere you’d like simply by drilling and tapping two 2mm holes. Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons for a lifetime of worry-free performance. Each cage is molded in blue or black and backed by our limited lifetime warranty against breakage. Tech Notes:  The RPM ESC Cage for the Sidewinder 3 & Sidewinder SCT series ESCs works with Castle Sidewinder #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00. While our ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – Stampede 4×4, Slash 4×4, Slash 4×4 LCG, Slash 2wd, Slash 2wd LCG, Rally, Stampede VXL 2wd, Rustler VXL & Bandit VXL. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate is used – Rustler XL-5, Stampede XL-5 2wd, Craniac, Skully & Bandit XL-5.

99,-

KJØP
Hovedbilde RPM 70920 “No Clip” Body Mounts for the Traxxas Slash ... Hovedbilde RPM 70920 “No Clip” Body Mounts for the Traxxas Slash ...
RPM 70920 “No Clip” Body Mounts for the Traxxas Slash ...
Quick Notes: – eliminates body clips completely! – adds scale realism. – mock radiator and fans doubles as the body lock. – see tech notes for compatible bodies. – versions available for the 2wd & 4×4. Description Are you tired of losing those pesky body clips? One flip and you’re almost guaranteed to lose at least one! Are you irritated that those ugly body posts sticking up through your body ruin its scale looks? The RPM “No Clip” Body Mount is the solution you’re looking for. We completely eliminate the through-the-body posts that destroy the scale looks of your Slash. We do this via an ingenious body mount system that uses a scale, mock radiator out back and four unobtrusive screws out front that hide an under-body frame. What’s visible on the outside is an ultra-cool, scale radiator (based off of a full-sized desert truck radiator), complete with mock fan blades and fan shrouds (also based off of their full-sized counterpart). The fan shrouds are the key to this clever mounting system because the fan shrouds are the locking mechanisms that lock the body in place! Simply slip the front under-body frame into the adjustable catch up front, then drop the hidden locks below the radiator out back into the lock plate and rotate the fan shrouds until they lock in place. Simple, inventive, RPM strong and extremely scale! Our “No Clip” Body Mounts incorporate vertical adjustability where neither the 2wd nor the 4×4 had before! Now you can drop the body an extra 3/16” (4.8mm) or raise it up to 3/8” (9.5mm) higher than stock. If you’re tired of your tires rubbing off that time-consuming / expensive paint job in the wheel wells or if you’ve dropped your ride for more street performance, our mounts will let you alter that body position effortlessly. Each RPM “No Clip” Body Mount system comes with everything needed to bolt up to your favorite ride. Made right here in the USA and molded from our trademark blend of engineering grade nylons for strength and durability you can trust. Tech Notes: RPM “No Clip” Body Mounts will not work with the Traxxas On Board Audio System (OBA). RPM Body Mounts are designed for use with most stock Traxxas Short Course Bodies, although they will not work with Ford Raptor bodies (#5815, #5815A, #5815R, #5815X, #5826, #5826A, #5826R & #5826X), Rob MacCachren Dodge body (#6833) or the Dakar body (#58044, #5818, #5818A or #5820A). This system has not been tested with any aftermarket bodies and is only guaranteed to fit the stock Traxxas part numbers below or any bodies based off of the #5811 & #6811 body styles. The following stock Traxxas part numbers represent a partial list of compatible bodies: No Number Plate Bodies: 5811, 5811X, 5816, 5817, 5819 & 5825. Number Plate Bodies: 6811, 6811X, 6817, 6818, 6820, 6821, 6825, 6825X, 6826, 6826R, 6831, 6849 & 6889.

279,-

KJØP
Hovedbilde Pro-Line 607002 Body Mount Thumbwasher Kit
Pro-Line 607002 Body Mount Thumbwasher Kit
This is the Pro-Line Body Mount Thumbwasher Kit. FEATURES: For the #6070-00 , #6071-00 , #6087-00                   Pro-Line Body Mount Kits INCLUDES: Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

159,-

KJØP
Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ... Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...
RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...
RPM Low Visibility Wheelie Bars for Slash 2WD, Slash 4×4, Losi SCTE & ECX Torment 4×4 Quick Notes: Designed for use with RPM rear bumpers / bumper mounts only Fits the RPM Slash 2wd Rear Bumper Fits the RPM Slash 4×4 Rear Bumper Fits the RPM ECX Torment 4×4 Rear Bumper Fits the RPM Losi SCTE Rear Bumper Mounts A serious issue with most currently available wheelie bars is the inability to use the truck as an off-road vehicle because most wheelie bars tend to stick out too far behind the truck. The RPM Low Visibility Wheelie Bar solves that problem! Since our wheelie bar and included wheels sits inside the protection of the rear bumper, they don’t stick out allowing the truck to function normally when rippin’ up the local track, yet still do their job when the occasional heavy finger pull yanks the front wheels off of the ground! The RPM Low Visibility Wheelie Bar design bolts directly to all RPM Slash bumpers (both 2wd and 4×4), Losi SCTE & ECX Torment 4×4 at the mud flap mounts, while still allowing the use of RPM Mud Flaps (RPM #81012) as well as our Losi SCTE Bumper Mounts (RPM #73312! The RPM Wheelie Bar stays tucked up behind the rear bumper, yet sitting low enough to allow the wheels to touch down once the front end starts catching some serious air! Now any Slash, SCTE or Torment 4×4 owner can pull some sick wheel stands without the fear of grinding crucial rear bumper support components into dust! RPM Low Visibility Wheelie Bars are sold ready to install on an RPM Rear bumper (sold separately) with all necessary mounting hardware and complete instructions for assembly. RPM Low Visibility Wheelie Bars are manufactured from our trademark blend of incredibly strong nylons and backed by our limited lifetime warranty again breakage. Tech Notes: RPM Low Visibility Wheelie Bars are designed for use with RPM Slash 2wd and Slash 4×4 rear bumpers, ECX Torment 4×4 rear bumpers as well as our Losi SCTE Rear Bumper Mounts exclusively and will not work with stock rear bumpers or bumper mounts.

149,-

KJØP
Hovedbilde Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...
Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...
This is a pair of Pink Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Pink firmness rating           +10% progressive compression INCLUDES: Two Pink Rate Front Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)  

59,-

KJØP
Hovedbilde Traxxas 2660 Long Big Bore Shocks w/o Springs (2)
Traxxas 2660 Long Big Bore Shocks w/o Springs (2)
These are LONG BIG BORE SHOCKS by Traxxas.  They may be used with the        many Taxxas cars. FEATURES: Pre-assembled shocks only require filling with included oil,             attaching included spacers and (not included) springs.           Big-bore long shocks are hard-anodized and teflon coated T-6             aluminum. INCLUDES: Two Shock Caps (aluminum)          One Silicone Oil Bottle           Two Cylinders (aluminum) 1-1/2"    Three Diaphragms (black rubber)           Three Large C Clips                Two Ball Ends (white plastic)           Three Flat Washers (nylon) 6mm     Two Bushings (metal)           Two Spacers (teflon) 5mm           Four Pistons (black plastic)           Six "O" Rings (blue)               Two Spring Retainers (plastic)           Two Flat Washers (nylon) 5mm       Two Spring Spacers (black plastic)           Five Small E Clips           Two Shock Shafts (1-3/4"x1/8") approximately           Twelve Spring Adjusters (various size) REQUIRES: Springs           C ring or needle nose pliers           Tweezers

389,-

419,-

Ikke på lager
-7%
Hovedbilde RPM 80023 Front Bumper Chrome & Skid Plate Gray Slash ...
RPM 80023 Front Bumper Chrome & Skid Plate Gray Slash ...
Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate.  Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!    

269,-

299,-

KJØP
-10%
Hovedbilde Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4
Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4
This is the Gear Cover/Motor Wire Hold Down for use on the                              Traxxas Slash 4X4. FEATURES: Nylon construction           Black in color INCLUDES: One Gear Cover           One motor wire hold down REQUIRES: Installation on the vehicle

59,-

69,-

KJØP
-14%
Hovedbilde Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover
Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover
Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

KJØP
-12%
Hovedbilde Traxxas 4954X Hex Wheel Hubs 14mm Aluminium (4)
Traxxas 4954X Hex Wheel Hubs 14mm Aluminium (4)
Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4) Replace the stock molded hex hub adapters with these absolutely bulletproof 6061-T6 aluminum hex hubs. The aluminum hex hubs are CNC machined for the utmost precision and feature machined accents for incredible detail. The aluminum hex hubs will not develop play over time and they clearly stand out every time the wheels are removed from the vehicle.

229,-

KJØP
Hovedbilde Traxxas 8373 Response tires mounted on 1.9
Traxxas 8373 Response tires mounted on 1.9" Front ...
Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires) (front) (2) 12mm hex.

289,-

319,-

KJØP
-9%
Hovedbilde Traxxas 6845G Drag Link Alu Green
Traxxas 6845G Drag Link Alu Green
Drag link, machined 6061-T6 aluminum (red-anodized) This ultra-rigid aluminum piece provide added stability and durability for drivers seeking the ultimate in control from their Slash, Stampede, or Rustler 4X4 model.

119,-

129,-

KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png