Hopp til innhold
Hjem / Biler / RC-Lastebiler/hengere / Carson / Carson Lastebil deler / Carson 907079 Underride Barrier for Tamiya Container and Trank T
-5%

Carson 907079 Underride Barrier for Tamiya Container and Trank T

Art.nr: 907079

619,-

649,-

- 5%
Carson

Carson
** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Underride Barrier for Tamiya Container and Tank Trailer (56302 & 03).

Produsent

Carson

Carson

Carson har mye til Tamiya Lastebiler.

Kunder kjøpte også

Hovedbilde Tamiya 58620 1/10 Toyota FJ Cruiser Black CC-O1 4WD ...
Tamiya 58620 1/10 Toyota FJ Cruiser Black CC-O1 4WD ...
  This is the 1/10 scale electric powered, radio controlled, 4WD  Black Special Toyota FJ Cruiser Off-Road Kit from Tamiya. FEATURES  Chassis: CC-01, ladder frame bathtub type  Drive: Four wheel drive, shaft driven  Motor: 540 electric motor  Shocks: Oil-filled, CVA  Gearbox: Front and rear sealed gearbox  Differentials: Bevel gear, lockable rear diff for better off-road  performance  Transmission: Single speed  Body: Trimmed polycarbonate, painted black, separate black metal  plated door mirrors, lamps, spare tire cover and front grille,  smoke colored windows  LED Lights:  Tires: Semi-pneumatic all-terrain, rubber construction 1.3" (33mm)  wide, 3.7" (94mm) diameter  Wheels: Six spoke plastic, 2-piece 1" (26mm) wide, 1.9" (48mm)  diameter  Bumper: Front, plastic construction, black in color  Suspension: Front, long stroke double wishbone  Rear, four link rigid  Camber Tie Rods: Fixed non-adjustable  Caster: Adjustable, caster/toe-in refers to the angle of the front  suspension when viewed from the side of the car in relation to the  chassis  Steering: Bell-crank type with servo saver and adjustable linkage   INCLUDES Tamiya Toyota FJ Cruiser with oil-filled shocks, 540 motor, ESC,  clear body, tires, wheels, LED light bucket kit (see COMMENTS)  shock oil, 16 tooth pinion gear, spur gear, instructions   REQUIREMENTS  Radio: 2-Channel with 1 Servo  Electronic Speed Control:  Eight AA batteries for transmitter  Battery: 6-cell stick pack w/ standard connector  Charger: AC/DC timed or peak for 6-cell battery  Misc. Items: Building and track equipment   SPECIFICATIONS VEHICLE-  Length: 18.7" (474mm)  Width: 7.9" (200mm)  Height: 7.4" (188mm)  Weight: 53.3oz (1510g)  Wheelbase: 10.5" (267mm)  Gear Ratio: 1:14.67     COMMENTS The TLU-02 Light Control Unit (not included) can be installed for  more light effects

3.195,-

3.495,-

På lager 1
KJØP
-9%
Hovedbilde Traxxas 3185X Screws 3x8mm washerhead large head (6)
Traxxas 3185X Screws 3x8mm washerhead large head (6)
Screws, 3x8mm washerhead machine (large head for motor mount) (6)

29,-

På lager 6
KJØP
Hovedbilde RPM 73615 Hybrid Gearbox Housing/Rear Mounts Blue
RPM 73615 Hybrid Gearbox Housing/Rear Mounts Blue
Gearbox Housing and Rear Mounts for the Traxxas Slash 2wd, e-Rustler, e-Stampede & Bandit Quick Notes: – fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd – replaces stock Traxxas #3691 & #3691A – hybrid nylon / aluminum for a lightweight, yet strong gearbox – intuitive mounting system allows individual removal of the gearbox or A-arm mounts – matching Gear Cover also available – replacement Rear Mounts available Description The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2wd vehicles is designed to solve a multitude of issues with stock and other aftermarket transmission housings. Our gearbox housing and mounts are a blend of aluminum and molded nylon parts for the perfect combination of strength, durability and heat dissipation. Check out this awesome list of included features: Aluminum Motor Plate: Manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability. Locks in gear mesh for worry-free pinion to spur settings, eliminating fears of exploding spur and pinion gears from an overheated stock transmission case. Offers significant motor heat dissipation for cooler motor temperatures, unlike stock plastic motor plates that insulate the motor. Not integrated with the rear bumper mounts, meaning rear impacts will not bend the motor plate, (when used with a rear bumper or bumper mounting system such as RPM #80902 or #80905). Molded Gearbox Housings: Molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Retains stock bumper mounting holes for positive, solid support of any bumper or wheelie bars you may choose. Retains a stock “cover” for the motor, adding motor protection where most aftermarket housings leave the motor completely exposed to rear impacts. We modified our housing to eliminate the huge bottom hole in the stock housing, keeping your internal gears cleaner longer. Quiet! With a completely enclosed gearbox housing, you’ll no longer have the loudest transmission on the track. Redesigned exterior features are smoother; making it less likely dirt will adhere or build up on the case. Separate housing and rear mounts means transmission maintenance won’t affect suspension settings. Molded Rear Mounts (0° & 3° Rear Mounts Included) Separate from the gearbox housing and easy to access. Each mount is individually accessible and removable without removing the transmission or vice versa. Simply unbolt 2 screws (and a hinge pin) to remove an A-arm mount or 6 screws to remove the transmission! Sold with two sets of rear mounts in each package – 0° and 3° rear mounts are included. Molded from the RPM blend of ultra durable, long lasting, bulletproof nylons. Molded mounts means tighter tolerances and less slop than with machined components for better camber and toe angle retention. Each RPM Gearbox Housing kit is available in black, green or blue and comes will all necessary mounting hardware and instructions. Whether racing or bashing, the RPM Gearbox Housing is one of the least expensive yet most valuable options you can buy! Every RPM Gearbox Housing kit is proudly designed and manufactured in the USA! Get yours today! Tech Notes:  RPM Gearbox Housings do not include internal components (gears bearings, shafts, etc.). Internal components (either stock or aftermarket) must be transferred to the RPM Gearbox Housing from the stock Traxxas transmission. RPM Gearbox Housings replace stock Traxxas #3691 (or #3691A). Due to the amount of strengthening material we added to the rear mounts, some modification of stock a-arms may be needed to allow free suspension movement. This slight interference issue is nonexistent when used with RPM rear a-arms. Slash 2wd LCG Chassis Notes: The Traxxas Slash LCG Chassis is slightly longer than the standard chassis so some modification of the back end may be necessary. A 45° chamfer, a radius or shortening the chassis by a small amount corrects the issue.

379,-

399,-

På lager 4
KJØP
-5%
Hovedbilde Maxam 450018 Ladekabel Bananstikk Traxxas
Maxam 450018 Ladekabel Bananstikk Traxxas
Ladekabel Bananstikk Traxxas

89,-

99,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-10%
Hovedbilde Traxxas 2582 Button Head Machine Screw 3x30mm Revo (6) ...
Traxxas 2582 Button Head Machine Screw 3x30mm Revo (6) ...
This is a 6 pack of 3X30mm Button Head Screws. FEATURES: Steel construction           Black in color           Button head design INCLUDES: (6) 3X30mm button head screws SPECS:    Length:    1-3/16" (30mm)           Diameter:     1/8"  (3mm)

35,-

På lager 3
KJØP
Hovedbilde Traxxas 2745 Nylon Locknuts 3mm (12)
Traxxas 2745 Nylon Locknuts 3mm (12)
These are 3mm Nylon Locking Nuts from Traxxas. FEATURES: Durable metal construction           Nylon inserts INCLUDES: (12) Lock Nuts SPECS:    Size:  3mm

29,-

39,-

Ikke på lager
Ikke på lager
-26%
Hovedbilde Axial AXA0422 Hex Socket Tapping Button Head M2.6x6mm ...
Axial AXA0422 Hex Socket Tapping Button Head M2.6x6mm ...
These are the 2.6x6mm Hex Socket Tapping Button Head Screws used on the                             Axial Wraith Rock Racer. FEATURES: Steel construction, black in color INCLUDES: Ten 2.6x6mm Hex Socket Tapping Button Head Screws REQUIRES: 1.5mm hex wrench. SPECS:    Length: 6mm           Diameter: 2.6mm

39,-

Ikke på lager
Ikke på lager
Hovedbilde Axial 1069 Washer 2.7x6.7x0.5 (10)
Axial 1069 Washer 2.7x6.7x0.5 (10)
Axial Washer 2.7x6.7x0.5

32,-

På lager 1
KJØP
Hovedbilde Carson 907186 1/14 Drivers figure
Carson 907186 1/14 Drivers figure "Robert"
1/14 Drivers figure "Robert"

125,-

145,-

** Ikke på lager
KJØP
-14%
Hovedbilde Frakt 29,-
Frakt 29,-
1 stk frakt. Dette hvis man ombestemmer seg og vil ha varen sendt istendenfor å hente den.

29,-

Ikke på lager
Ikke på lager
Hovedbilde Carson 501515 Reflex 6-channel receiver 2.4 GHz
Carson 501515 Reflex 6-channel receiver 2.4 GHz
Reflex 6-channel receiver 2.4 GHz Suitable for Reflex Stick 6-channel 2.4 GHz  

550,-

På lager 1
KJØP
Hovedbilde Carson 907099 Pallet of wood 1:14 Hovedbilde Carson 907099 Pallet of wood 1:14
Carson 907099 Pallet of wood 1:14
CARSON Pallet of wood 1:14

99,-

På lager 2
KJØP
Hovedbilde Carson 907078 Short Underride protection
Carson 907078 Short Underride protection
Underride protection for Tamiya 56306 1/14 Flatbed Semi Trailer Kit (56302)

589,-

629,-

** Ikke på lager
KJØP
-6%
Hovedbilde Tamiya 56502 1/14 Semi-Trailer Light Set Hovedbilde Tamiya 56502 1/14 Semi-Trailer Light Set
Tamiya 56502 1/14 Semi-Trailer Light Set
This is a Hop-Up Light Kit for the Tamiya Semi-Trailer (56302) that is               used with the Tamiya King Hauler (56301). FEATURES: These lights are for brake lights (one left and one right) and             turn signal (or "blinker") lights (one left and one right). The             bulbs are clear and installed behind the brake and turn signal             lenses (just like a real car/truck). INCLUDES: One Light Set: Brake and blinker lights, light cable (that runs the             length of the trailer) and plug (to plug into connector cable).           One Connector Cable: Connects the light set to the circuitry board on             the tractor (the circuitry board is included in the tractor             light set).           One Rubber Bushing: To protect the light cable where it passes             throught the front of the trailer.           One Plastic Bushing: To protect the light wires where they pass             through the floor of the trailer to the rear bumper.           Two Nuts(2mm), two Bolts(2x15mm) and Two Washers(2mm): For mounting             the plug receptacle in the tractor body.           One Double-Sided Tape           One Illustrated instructions REQUIRES: This light set is powered by the 6-cell motor battery in the tractor.           Must use the Tractor Lights 56501 also to make functional.

529,-

569,-

På lager 3
KJØP
-7%
Hovedbilde Tamiya 56505 Motorized Support Legs Tractor Trailer
Tamiya 56505 Motorized Support Legs Tractor Trailer
This is a Great Hop-Up to add Realism to your Tamiya King Hauler kit. INCLUDES: Two AA battery cases One RS-29 motor Two battery case connectors (these are used to connect the 2 battery cases) One battery terminal A One battery terminal B One tube of silicone grease (1/4 oz., for the gears) One coupler plate A One servo plate One switch plate One worm gear (acts kind of like a pinion) One 28 teeth / 12 teeth counter gear One 36 teeth / 10 teeth counter gear One 40 tooth gear Two return springs One inner spring Four rack springs One 2x67 mm threaded shaft One 2x50 mm threaded shaft One 3/4" x 4 3/4" double sided tape One 20x20 mm double sided tape One shift gate (used on the transmitter as a guide) Three nylon adjusters (a.k.a. 4mm ball cups) One 5x40 mm rubber tubing One 4-way wrench Two metal racks Two joint cups Two metal rack pinion Two pinion shaft Two 5mm washers Two 5x8 mm bronze bushings Two 3x7 mm bronze bushings One drive shaft One brass hex hub One hex wrench One brass rod nut One on/off switch Two coupler nuts Two 4 mm ball connectors Two 4 mm e-ring Four spring pins Four 3x3mm grub screw (a.k.a. hex screw) Two 2 mm e-rings Two 2 mm washers Five 2.5x8mm socket head cap screws Nine 2x8mm screws Thirteen 2x8mm screws Six 2 mm nuts Four 3x10mm flanged screws Two 3mm nuts Four 3x6mm flat head screws Two 3x8mm screws Three 3x8 mm self tapping screws Two gear box halves (black molded nylon) One trailer hitch (nylon) One hitch plate (nylon) Two nylon leg guides Two nylon swivel arms Two nylon mounting arms REQUIRES: One Standard Servo and Four "AA" size batteries.

899,-

949,-

På lager 1
KJØP
-5%
Hovedbilde Carson 13516 Styrestag
Carson 13516 Styrestag

139,-

149,-

På lager 1
KJØP
-7%
Hovedbilde Carson 13513 Truck horns and rearview mirrors
Carson 13513 Truck horns and rearview mirrors
Truck horns and rearview mirrors Suitable for all Tamiya trucks. Content: 2 horns and 2 rearview mirrors

149,-

** Ikke på lager
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png