Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Axial El-Biler / SCX10 Honcho / Skruer / Axial 433 Hex Socket Button Head M3x6mm Black (10)

Axial 433 Hex Socket Button Head M3x6mm Black (10)

Art.nr: AXA433

32,-

Axial

Axial
På lager: 6

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

  These are the 3x6mm Tapping Hex Socket Button Head Screws from Axial.

FEATURES: Steel construction
          Black in color

INCLUDES: Ten Button Head Screws

SPECS:    Length: 6mm
          Diameter: 3mm

 

Produsent

Axial

Axial

Kunder kjøpte også

Hovedbilde HPI Racing Z517 Binder Head Screw M3x8mm (10pcs)
HPI Racing Z517 Binder Head Screw M3x8mm (10pcs)
THIS PART FITS THE FOLLOWING KITS / PARTS: Wheely King 4x4 Savage X 4.6 Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Savage XL Flux Crawler King Ford F-150 SVT Raptor E10 TOURING MICHELE ABBATE... E10 DRIFT FAIL CREW NISSAN SKYLINE... Crawler King 1979 Ford F-150

39,-

KJØP
Hovedbilde Axial 30463 WB8 Universal Joint Rebuild Kit (2)
Axial 30463 WB8 Universal Joint Rebuild Kit (2)
This is the Universal Joint Rebuild Kit for the Axial Wraith.     FEATURES Steel construction   INCLUDES Two Pins and two Pin Retainers   REQUIREMENTS Installing in universal joint following instructions in manual

89,-

KJØP
Hovedbilde Axial AXA463 Hex Socket Tap Flat Head M3x6mm Black ...
Axial AXA463 Hex Socket Tap Flat Head M3x6mm Black ...
Axial Hex Socket Tap Flat Head M3x6mm Black (10)

45,-

KJØP
Hovedbilde Traxxas 3638X Shock Tower Rear
Traxxas 3638X Shock Tower Rear
This is the stock replacement REAR shock tower for the Traxxas Stampede/Rustler and Bandit FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Width at top: 4 5/16"    Width at bottom: 2 1/4"    Thickness: 1/4"    Height: 2 13/16" INCLUDES:    (1) Rear shock tower for the Traxxas Stampede

59,-

KJØP
Hovedbilde Traxxas 3415 Tool Kit Hovedbilde Traxxas 3415 Tool Kit
Traxxas 3415 Tool Kit
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
Hovedbilde Traxxas 2523 Countersunk Machine Screws 2.5x10mm (6)
Traxxas 2523 Countersunk Machine Screws 2.5x10mm (6)
These are the 2.5x10mm Countersunk Machine Flat Head Screws           for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction           Black in color INCLUDES: Six Countersunk Machine Flat Head Screws REQUIRES: Installation on the vehicle SPECS:    Length: 10mm           Diameter: 2.5mm

35,-

KJØP
Hovedbilde Axial 1260 Hex Socket Tap Flat Head M2.5x12mm (10)
Axial 1260 Hex Socket Tap Flat Head M2.5x12mm (10)
 These are the Axial M2.5x12mm Hex Socket Tapping Flat Head Screws. FEATURES: Black metal construction INCLUDES: Ten M2.5 x 12mm screws REQUIRES: Installation on to vehicle COMMENTS: Can be used wherever this size screw is needed

32,-

KJØP
Hovedbilde Hitec HS-7950TH HV Digital Ultra Torque Coreless TG
Hitec HS-7950TH HV Digital Ultra Torque Coreless TG
Hitec Digital HS-7950TH for 7,4V. Digital servo fra Hitec hvor du kan bruke 2celler lipo direkte til servoen uten regulator. Meget sterk servo som leveres med titanium alloy metal gears, med 2 kulelager. Husk å sjekk at din mottaker takler 7,4V uregulert.   Speed: 0,15sec/60grader på 6V, 0,13sec på 7,4V Torque: 29kg-cm på 6V, 35kg-cm på 7,4V Weight: 68gram Size: 40x20x38mm This is the HS-7950TH High Speed, Ultra Torque Digital Servo from Hitec. FEATURES: Ideal for giant scale planes, monster trucks and rock crawlers           Coreless motor for precise centering and accuracy           G2 programmable digital circuit, programmable features include;             Dead Band Width            Speed (reduction)             Fail Safe Position         Direction (CW/CCW)             Fail Safe On/Off           End Points             Overload Protection        Resolution High/Low           Titanium gears that don't break or develop slop like conventional             metal gears           Capable of operating on two LiPo packs INCLUDES: HS-7950TH High Speed, Ultra Torque Digital Servo with 1" (25.5mm)             single arm horn, 1" (21.5mm) aluminum single arm horn, 0.85" (32mm)             heavy duty single arm horn, 2.8" (72mm) heavy duty double arm horn,             2.3" (59mm) double arm horn, 1.8" (45mm) round horn, four eyelets,             four rubber grommets, four 2x15mm mounting screws and instruction             sheet REQUIRES: Installing in model and connecting to control linkage and receiver SPECS:    Size: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm)           Weight: 2.40oz (68g)                    6.0V                   7.4V           Speed:  0.15 sec             0.13 sec           Torque: 403 oz/in (29kg-cm)           486 oz/in (35kg-cm)           Drivetrain Type: Dual ball bearing COMMENTS: This servo can be programmed with any Hitec digital servo             programmer. However, the Overload Protection and Resolution High/             Low can only be programmed with the HFP-20, HPP-21             or the HPP-21+           A note on coreless motors-a conventional servo motor has a steel core             armature wrapped with wire that spins inside the magnets. In a             Coreless design, the armature uses a wire mesh that forms a cup             that spins around the outside of the magnet. This arrangement is             much lighter resulting in smoother operation and faster response             time.

1.759,-

1.995,-

KJØP
-12%
Hovedbilde Axial AX1218 Bearing 5x10x4mm
Axial AX1218 Bearing 5x10x4mm
This is a pair of replacement 5x10x4mm Bearings for the Axial AX10 Scorpion Rock Crawler. FEATURES Stainless steel construction, silver in color Sealed design helps keep the bearing running smooth and friction free INCLUDES Two Bearings REQUIREMENTS Installation following the model manual SPECIFICATIONS Inside Diameter: 5mm Outside Diameter: 10mm Thickness: 4mm

69,-

KJØP
Hovedbilde Absima 2440015 Green Small Body Clips (10)
Absima 2440015 Green Small Body Clips (10)
Absima 2440015 Green Small Body Clips (10)

49,-

59,-

KJØP
-17%
Hovedbilde Maxam 450199 adapter T-plugg han - Traxxas hun
Maxam 450199 adapter T-plugg han - Traxxas hun
Adapter, T-plug han - Traxxas hun

59,-

Ikke på lager
Hovedbilde MIP 9208 2.0mm Hex Driver Wrench Gen 2 Hovedbilde MIP 9208 2.0mm Hex Driver Wrench Gen 2
MIP 9208 2.0mm Hex Driver Wrench Gen 2
#9208 - MIP 2.0mm Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the go-to gear for RC enthusiasts who demand the best. The iconic amber handles and rock-solid build have become synonymous with precision, performance, and passion. But even legends deserve an upgrade, and that's where the all-new MIP Gen 2 tools come in.   No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, each tool now sports a vibrant color-coded ring for instant identification.   Consistency is King: The MIP Gen 2 line is designed to create a cohesive look and feel across your entire tool collection. The subtle yet impactful design tweaks reinforce the iconic MIP identity, making it easier than ever to spot those legendary amber handles in your toolbox. It's not just about aesthetics, it's about building a sense of confidence and reliability that comes from knowing you're using the best.   Evolution, Not Revolution: Don't worry, the core of what makes a MIP tool a MIP tool remains unchanged. The rock-solid construction, the precise tolerances, the uncompromising quality – it's all there, just enhanced and refined. The Gen 2 update is about building on the legacy, not abandoning it. It's about taking the tools you love and making them even more awesome while making every tweak, tune, and adjustment smoother, faster, and more satisfying than ever before.   So, are you ready to experience the next level of RC tool awesomeness? Experience the future of RC tools with MIP Gen 2 Tools!   Package Includes:   1 x .2.0mm Hand Wrench   Tool Makeup:   Precision Ground with Diamond wheels to remove internal stress and part fatigue Made from US Grade tool steel drill blanks  Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !  Super Comfy to the hand, Acetate Handles that are resilient to hot and cold weather so won't harm your hands in poor weather conditions. Every tool assembled by hand  Manufactured and packaged 100% in the USA Accolades: Highly regarded as the #1 Tool in the RC industry for almost 30 years of production. Used by World Champions and hobbyists alike around the World Trusted wrench to get out stripped screws other sub par tools create  World Class Products, Precision Tools, Race Proven Performance, That's MIP!

299,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png