Hopp til innhold

Axial 24007 55T Rock Crawler Electric Motor

Art.nr: AX24007

249,-

Axial

Axial

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Axial 55T Rock Crawler Electric Motor.


FEATURES: Equip or upgrade the Axial AX10 RTR or other rock crawlers for more
            low end pull and slower speed while crawling than stock 27 turn
            motors
          Preinstalled bullet connectors, no soldering required


INCLUDES: Axial 55T Rock Crawler Electric Motor with bullet connectors


REQUIRES: Compatible speed control for rock crawler motors


SPECS:    Shaft Diameter: 3.2mm (0.12")
          Shaft Length: 12.5mm (0.49")
          Can Diameter: 36mm (1.4")
          Can Length: 50.75 (2")
          Weight: 164g (5.8oz)
          Mounting Pattern: 25mm (0.98" )
          Wire length: 115mm (4.5")
          Input Voltage: 4+ cells (12VDC) max

Produsent

Kunder kjøpte også

Toe links, molded composite, 100mm (89mm center to center) (black) (2)

79,-

På lager 5
KJØP
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

På lager 2
KJØP
Tires & wheels, assembled, glued (black wheels, Maxx® All-Terrain tires, foam inserts) (2) (17mm splined) (TSM® rated)

459,-

499,-

På lager 2
KJØP
-8%
Traxxas 30WT/350cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 30WT (350cSt) Bottle size: 60ml

99,-

109,-

På lager 7
KJØP
-9%
Bumper Front Maxx

69,-

På lager 2
KJØP
Denne delen produseres ikke lengre av Traxxas, og er erstattet av delene til Widemaxx!   Suspension arm, lower, black (left or right, front or rear) (2)

109,-

Dette produktet produseres ikke mere.
Ikke på lager
Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

På lager 1
KJØP
-11%
Suspension arms, upper, black (left or right, front or rear) (2)

85,-

På lager 1
KJØP
Yeah Racing Brass Knuckle Arm 2pcs For AXIAL SCX10 II Description: Get more from your tires with this Brass made front knuckles by adding weight exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the side of the knuckle.   Feature: For: Axial SCX10 II Material: Brass Color: Brass Include: Knuckle Arms (2 pcs) Mounting Hardware (1 pack)

599,-

På lager 1
KJØP
Yeah Racing Brass Rear Axle Lock Out 2pcs For Axial SCX10 II Description: Get more from your tires with this Brass made rear lockouts by adding weight exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the side of the knuckle.   Feature: For: Axial SCX10 II Material: Brass Color: Brass Include: Rear Axle Lock Out (2 pcs) Mounting Hardware (1 pack)

299,-

På lager 1
KJØP
Alloy Front Bumper w/ White LED Light For Axial SCX10 III High detail scale bumper for Axial's SCX10 III! Low profile means it's only function is to protect your chassis whilst being lightweight so it won't get caught up! Also included are two led bulbs which you can insert into the bumper as well.   Features: For: Axial SCX10 III Material: Alloy Color: Black   Includes: Bumper (1 pc) Led Cable (1 pc) Bumper Mount Posts (2 pcs) Mounting Hardware (1 pack)

279,-

299,-

** Ikke på lager
KJØP
-7%
Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC) Item no. 542408 The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.   Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 60A Forward Burst Current: 360A Reverse Continuous Current: 230A Reverse Burst Current: 180A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36.5x32x18mm Weight: 39g

399,-

449,-

** Ikke på lager
KJØP
-11%
   This is Tamiya Color Spray Lacquer for Polycarbonate (PS-3 Light Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

På lager 8
KJØP
  This is a tube of Basic Type Tamiya Putty. FEATURES: Designed for use in repairing and modifying plastic models           May also be used for repairing and covering surface of metal and             wooden models           May be diluted with Tamiya Lacquer thinner before curing INCLUDES: 1.12oz (32g) Tube of Basic Type Tamiya Putty

49,-

** Ikke på lager
KJØP
This is a 180ml Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.     FEATURES Easy application.  This light gray primer has excellent coverage and is recommended for  use prior to painting a light color onto a darker colored material.  It can be used on plastic or metal.  Air spray can.  Color coded plastic lid.   INCLUDES One Can of Surface Primer L   REQUIREMENTS Well Ventilated Area   SPECIFICATIONS  Contains: 180ml

139,-

På lager 5
KJØP
TAMIYA RC COMICAL HORNET The original Hornet needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Hornet is still among TamiyaΓÇÖs best-selling kits to this day. Now the legend is re-imagined as the Comical Hornet, with a new body inspired by the famous original. The re-imagined body, which includes a newly designed driver figure, sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. WR-02CB Chassis - Great Fun Awaits! The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save hassle in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while underguard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive. • 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm. • Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up. • Polycarbonate body with sticker design based on the original Hornet. • Orange and white 2-piece wheels use bubble tires (front: ribbed, rear: round block) • Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components. • Comes with a newly designed helmeted driver figure with hands gripping a steering wheel. • Suspension arms feature multiple damper attachment holes for easily adjustable performance. • Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) • Includes 540-type brushed motor. • Internal Gear Ratio: 18.3:1 • Includes wheelie bar.   Requires: 2-channel radio steering servo 7.2-volt battery pack & chargera Tamiya PS/TS paint. NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment.   SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type WR-02CB Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Led Lights Not Included, but sold separately Motor Brushed 540 Type Required To Complete 2-channel radio, steering servo, 7.2volt round case battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-wheel fully independent double wishbone Terrain Use Multi-Purpose  

2.195,-

2.295,-

På lager 4
KJØP
-4%
ALLOY FRONT BUMPER W/LED LIGHT FOR TRX-4 REDCAT GEN8 AXIAL SCX10 / II Description:  High detail scale bumper for the most popular crawlers on the current market! Features an inbuilt winch fairlead which allows you to route your winching cable through the bumper without having to modify your bumper! Also included are two led bulbs which you can insert into the bumper as well.   Feature:   For: Traxxas TRX-4, Redcat Gen8, Axial SCX10 / II Material: Alloy Color: Black/Red

279,-

319,-

** Ikke på lager
KJØP
-13%
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.         INCLUDES: One 100ml Spray Can of Synthetic Lacquer Brilliant Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.             Keep out of the reach of children.

109,-

På lager 4
KJØP
JP Hobby Brush 1 (1)

19,-

** Ikke på lager
KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Pure White Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

På lager 1
KJØP
  This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Blue paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only

30,-

På lager 5
KJØP
The Power HD LW-20MG is the latest servo that features an all-aluminum case, copper and aluminum gears, a powerful coreless motor and it pulls up to 20kg-cm of torque at a speed of 0.16s. The standard sized servo is also waterproof making this a great servo for crawlers, 1/8 scale trucks and buggies. It comes black anodized and with laser-etched graphics.   Spesifications: Torque(4.8V): 18.0 kg-cm (250.0 oz/in) Torque(6.0V): 23.0 kg-cm (319.4 oz/in) Speed: 0.14 sec (4.8V) ? 0.12 sec (6.0V) Operating Voltage 4.8 ~ 6.0 DC Volts Weight: 60.0 g (2.12 oz) Bearing Type Ball Bearing x 2 Motor Type Coreless Motor Gear Type Copper & Aluminum Working frequence 1520 s / 333hz Size: 40.7 x 20.5 x 39.5 mm ( 1.6 x 0.80 x 1.55 in)

449,-

539,-

På lager 2
KJØP
-17%
Happy Trials... This R/C model assembly kit creates the Dynahead 6x6. Its polycarbonate body is inspired by a cabover trial trucks particularly popular on the European scene, and designed by Takayuki Yamazaki. The boxy design features rear-hinged door motifs and has a wild look perfectly suited to the off-road. The model is based upon the 6-wheel drive G6-01TR, which offers extreme performance on tough surfaces, and thanks to its long wheelbase can even negotiate slopes of up to 40 degrees. ★The polycarbonate trial truck-inspired body has ample character! ★Marking stickers are included in the kit to add decoration to the body.     G6-01TR Chassis: Immense Traction Reduction gears on each axle slow drive shaft rotation to give the 6-wheel drive G6-01TR chassis an overall gear ratio of 37.35:1, for immense traction, which along with its great ground clearance gives the ability to take on tough off-road terrain. It is based around a tough, slimline monocoque frame. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears that provide superb traction and durability with the use of included diff putty. Double wishbone suspension is fitted with friction dampers, while black 5-spoke wheels are paired with 110mm diameter V-pattern block tires. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable. ★6-wheel independent double wishbone suspension uses friction dampers. Gearboxes are integrated into the chassis monocoque. ★All 6 wheels are fitted with hub reduction units, which slow down drive shaft output for greater torque and immense traction. ★Diff putty is included in the kit for use in the gear differentials, contributing to superb traction for this big 6-wheeler. ★The G6-01TR is built around a slimline monocque main frame, which provides a sturdy base for the model.     ★Power is provided by a motor behind the front wheels and transmitted to all wheels via a train of gears.     Specifications: ★Length: 428mm, Width: 256mm, Height: 222mm ★Wheelbase: 173mm + 126mm ★Tread: 209mm (Front, Center and Rear) ★Tire Width/Diameter: 50mm/110mm ★Monocoque Frame ★Gear-Driven 6WD ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★6-Wheel Independent Double Wishbone Suspension ★Gear Ratio = 37.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)

3.695,-

3.995,-

På lager 1
KJØP
-8%
This is a package of sixteen 5x11mm Ball Bearings from Tamiya. FEATURES Replaces plastic bushings in many Tamiya entry level kits  May also be used anywhere a ball bearing this size is needed INCLUDES Sixteen 5x11mm Ball Bearings SPECIFICATIONS  Inner Diameter: 5mm  Outer Diameter: 11mm  Thickness: 4mm

249,-

269,-

** Ikke på lager
KJØP
-7%
This is a pair of RC4WD Roady 1.7" 1/14 scale Semi Truck Tires  and Foam Inserts.   FEATURES Fits all RC4WD & Tamiya Tractor Semi Truck wheels  Superior wet traction  Mini rib sipes for absorbing rib edge stresses  Advanced X6 hard compound   INCLUDES Two 1/14 scale Semi Truck Tires with Foam Inserts   SPECIFICATIONS  Outer Diameter: 3.28" (83.5mm)  Width: 0.87" (22mm)  Inner Diameter: 1.71" (43.5mm)  Weight: 1.2 oz (34 g) each tire

159,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png